All-fibre optical system for exciting and detecting the vibration of silicon microresonator sensors

An all-fibre optical system for optical interrogation and detection of the vibrations of a silicon microresonator is reported. Metal-coated silicon microresonators are excited by intensity modulated laser light delivered through an optical fibre, while the vibration of the resonators is detected by an optical fibre interferometer. Measurements have shown that an average optical power of 10 μW is sufficient to maintain the flexural vibration of the resonator. When the resonator is used as a pressure sensor, its resonant frequency changes from 62 kHz to 130 kHz as the pressure varies from -0°6 bar to 1 bar (gauge). A silicon resonator with 700 nm aluminium coating functions as a temperature sensor, showing a frequency shift from 262 kHz to 251 kHz when the temperature changes from 25 °C to 80 °C.     

Capabilities and limits of ICP-MS for direct determination of element traces in saline solutions

An ICP-MS method for the determination of ultra-traces of 24 Elements (Li, Be, Mg, Al, Cr, Mn, Co, Zn, Cu, Ga, As, Se, Rb, Sr, Mo, Ag, Cd, Sn, Sb, Ba, Tl, Pb, Bi, U) at ng/L to μg/L levels in highly saline solutions (up to 30 g/L NaCl) was developed. Calculated to the salt content of the samples, limits of detection at the sub-μg/kg level were obtained. This allows the measurement of samples like sea water, or clinical samples like urine, serum and whole blood, with few or without sample preparation and a drastic improvement to the limits of detection. Compared to the determination in solutions of 1 g/L NaCl the limits of detection in the original sample were improved by one order of magnitude. Improvements in instrumental stability are achieved by the use of an additional gas, that is introduced to the aerosol stream and avoids salt deposition in the aerosol tube of the torch, the use of High Matrix Content (HMC) cones, that show no clogging even at NaCl-concentrations up to 50 g/L. With this setup the long term stability for measurements with changing matrix concentrations is < 10% without and < 5% with use of an internal standard for the individual samples. Cleaning up is necessary after 2 days of operation. The direct analysis of the Nearshore Seawater Reference Material NRC-CNRC CASS3 showed a good agreement with the certified and measured concentrations. Elements, that do not suffer from an isobaric overlap of matrix compounds can be determined clearly at ng/L levels. Measurement of different matrix concentrations showed, that acceptable results can be achieved with a single calibration for concentrations from 5 g/L NaCl to 30 g/L NaCl, though matrix matching shows the best results.     

Hamiltonian circle actions on symplectic manifolds and the signature

Let M be a symplectic manifold with a Hamiltonian circle action with isolated fixed points. We prove that σ (M) = b₀(M) − b₂(M) + b₄(M) − b₆(M) + … where σ (M) is the signature of M and b_i(M) is the ith Betti number of M.     

Electronic phase separation in a low-temperature tetragonal phase of lanthanum-strontium cuprates according to 139La NQR data

A nonuniform electron density distribution is observed in La_{1−x− y} Nd_ySr_xCuO₄ and La_1−x−y Eu_ySr_xCuO₄, and long-lived magnetic fluctuations in these compounds are studied. The dynamics of the magnetic fluctuations depends strongly on the magnetic properties of the rare-earth ions, which stabilize the low-temperature tetragonal phase. Pis’ma Zh. éksp. Teor. Fiz. 67, No. 5, 344–349 (10 March 1998)     

Isomorphism of the Baumslag-Solitar groups

Necessary and sufficient conditions for the isomorphism of two groups, each defined by a single relation of the type a^–1b^ma=bⁿ, are obtained.Translated from Ukrainskii Matematicheskii Zhurnal, Vol. 43, No. 12, pp. 1684–1686, December, 1991.