On a recursive method for the estimation of unknown parameters of partially observed chaotic systems

We investigate a recently proposed method for on-line parameter estimation and synchronization in chaotic systems. This novel technique has been shown effective to estimate a single unknown parameter of a primary chaotic system with known functional form that is only partially observed through a scalar time series. It works by periodically updating the parameter of interest in a secondary system, with the same functional form as the primary one but no explicit coupling between their dynamic variables, in order to minimize a suitably defined cost function. In this paper, we review the basics of the method, and investigate its robustness and new extensions. In particular, we study the performance of the novel technique in the presence of noise (either observational, i.e., an additive contamination of the observed time series, or dynamical, i.e., a random perturbation of the system dynamics) and when there is a mismatch between the primary and secondary systems. Numerical results, including comparisons with other techniques, are presented. Finally, we investigate the extension of the original method to perform the estimation of two unknown parameters and illustrate its effectiveness by means of computer simulations.     

A fractal analysis of skin pigmented lesions using the novel tool of the variogram technique

The incidence of the cutaneous malignant melanoma is increasing rapidly in the world [Ferlay J, Bray F, Pisani P, et al. GLOBOCAN 2000: Cancer incidence, mortality and prevalence worldwide, Version 1.0 IARC Cancer Base no. 5. Lyon: IARC Press, 2001]. The therapeutic address requires a method having high sensitivity and capability to diagnose such disease at an early stage. We introduce a new diagnostic method based on non-linear methodologies. In detail we suggest that fractal as well as noise and chaos dynamics are the most important components responsible for genetic instability of melanocytes. As consequence we introduce the new technique of the variogram and of fractal analysis extended to the whole regions of interest of skin in order to obtain parameters able to identify the malignant lesion. In a preliminary analysis, satisfactory results are reached.     

HPTLC Determination of Swertiamarin and Amarogentin in Swertia Species from the Western Himalayas

JPC – Journal of Planar Chromatography – Modern TLC - A high-performance thin-layer chromatographic (HPTLC) method has been established for simple and rapid quantification of two...     

New interpretations of XPS spectra of nickel metal and oxides

A current interpretation of XPS spectra of Ni metal assumes that the main 6 eV satellite is due to a two hole c3d⁹4s² (c is a core hole) final state effect. We report REELS observation in AES at low voltages of losses (plasmons and inter-band transitions) corresponding to the satellite structures in Ni metal 2p spectra. The satellite near 6 eV is attributed to a predominant surface plasmon loss. A current interpretation of Ni 2p spectra of oxides and other compounds is based on charge transfer assignments of the main peak at 854.6 eV and the broad satellite centred at around 861 eV to the cd⁹L and the unscreened cd⁸ final-state configurations, respectively (L is a ligand hole). Multiplet splittings have been shown to be necessary for assignment of Fe 2p and Cr 2p spectral profiles and chemical states. The assignments of Ni 2p states are re-examined with intra-atomic multiplet envelopes applied to Ni(OH)₂, NiOOH and NiO spectra. It is shown that the free ion multiplet envelopes for Ni²⁺ and Ni³⁺ simulate the main line and satellite structures for Ni(OH)₂ and NiOOH. Fitting the NiO Ni 2p spectral profile is not as straightforward as the hydroxide and oxyhydroxide. It may involve contributions from inter-atomic, non-local electronic coupling and screening effects with multiplet structures significantly different from the free ions as found for MnO. A scheme for fitting these spectra using multiplet envelopes is proposed.     

The role of water vapour on the oxidation of two Ln-Si-Al-O-N glasses (Ln=Y, La)

The oxidation behaviour of LnSiAlON (Ln=Y, La) glasses was studied at different temperatures (990-1150 °C) and under different water vapour pressures (360-2690 Pa). These results were also compared with those obtained under O₂, N₂/H₂O or O₂/H₂O mixtures. When glasses are treated under a N₂/H₂O mixture, optical and SEM observations show porous scales. Transformations of the reaction rate data and a kinetic model show that there is only one limiting process occurring during oxidation. This rate limiting step is the progress of the chemical reaction at the internal interface. Determination of the pressure law dependence and thermodynamics calculations of water vapour molecules dissociation at the investigated temperatures allow us to suggest that the mechanism of oxidation corresponds to decomposition of water molecules on the oxynitride glass surface.     

Determination of Surface Functional Groups in Lignocellulosic Materials by Chemical Derivatization and ESCA Analysis

Simple and convenient methods for determining surface chemical composition of lignocellulosic materials are described. The methods are based on vapor phase fluorine surface derivatization with either trifluoro acetic anhydride (TFAA), tri-fluoro ethanol (TFE) or pentafluorophenyl hydrazine (PFPH) and subsequent Electron Spectroscopy for Chemical Analysis (ESCA). Model cellulosic surfaces with well defined functionalities were used to optimize the derivatization reaction conditions. Detection and accessibility of surface hydroxyl functional groups were investigated in cotton and regenerated cellulose as models. Carboxymethyl cellulose (CMC) was used as a model surface for detection and quantification of carboxylic acid groups. Theoretical conversion curves for derivatization reactions were calculated and used to evaluate the extent of the reactions on the model surfaces. It was found that the conversion was higher for the regenerated cellulose and CMC than for cotton. The protocols developed using the model surfaces were applied to a case study on wood fibers with different degrees of complexity, namely dissolving and chemithermomechanical (CTMP) pulp. Untreated and oxygen-plasma modified pulps were compared with respect to the surface composition of functional groups. According to the derivatization reactions, functionalities containing oxygen were significantly increased on the plasma-treated samples. The effect of the treatment was found to be dependent on the type of pulp. Fluorine derivatization is shown to be an unambiguous method for clear assessment of the chemical functionalities of cellulosic surfaces.     

Selection of membrane materials for separation of H2-containing mixtures: Database analysis

Correlation between the chemical structure and transport characteristics of polyimides that are used for separation of hydrogen-containing mixtures is analyzed. The effect of various functional groups (keto-, oxy-, methoxy-, amino-, and others) in polyimides is considered in detail. The group-contribution method is demonstrated to be efficient for prediction of the transport properties of new polyimides and for the search for new promising diamine-dianhydride combinations. The empirical analysis of the database accumulated at the Topchiev Institute of Petrochemical Synthesis, Russian Academy of Sciences, confirms the perspectiveness of further investigations of new membrane materials for separation of H₂-CH₄ and H₂-CO gas pairs.     

Extension of the range of resonator scanning spectrometer into submillimeter band and some perspectives of its further developments

Extension of the working frequency of modern resonator spectrometers into submillimeter wave range is described. Experimental record of atmospheric absorption spectrum covering 45-370 GHz range is demonstrated for the first time, and measured water vapor J′_{ka′, kc′}-J_{ka, kc} = 5_1,5-4_2,2 at 325 GHz line parameters are presented. For the first time pressure lineshift for the 325-GHz water vapor line is measured. Further extension of working range is discussed. New estimations of physical limits of time needed for measurements of absorption in the whole Backward Wave Oscillator (BWO) range are given for phase continuous synthesizer regime. Basic schemes of fast broadband continuous phase synthesized sources are discussed. Verification of the previous measurements of water vapor 3_1,3-2_2,0 at 183 GHz line parameters is presented. Comparisons with ringdown resonator spectrometers are given.     

The analysis of thermal stresses in thermopiezoelastic semi-infinite body with an edge crack

Summary  Thermopiezoelastic materials have recently attracted considerable attention because of their potential use in intelligent or smart structural systems. The governing equations of a thermopiezoelastic medium are more complex due to the intrinsic coupling effects that take place among mechanical, electrical and thermal fields. In this analysis, we deal with the problem of a crack in a semi-infinite, transversely isotropic, thermopiezoelastic material by means of potential functions and Fourier transforms under steady heat-flux loading conditions. The problem is reduced to a singular integral equation that is solved. The thermal stress intensity factor for a crack situated in a cadmium selenide material is calculated. Received 20 March 2001; accepted for publication 18 October 2001     

Design and Cold Tests of Asymmetric Quasioptical Resonators

This paper presents the design and test of asymmetric quasioptical resonators for gyrotron applications, where most of the diffraction output coupling comes from the smaller of two mirrors. A computer code based on scalar diffraction theory is used to calculate the resonator losses and the electric field near the mirrors. Resonators with mirror separations approaching confocal have reduced side lobes in the diffraction patterns, which should allow for better power transmission and focusing. Cold tests have been performed at 94 and 141 GHz to measure the quality factor of the asymmetric resonators as a function of mirror separation and mirror misalignment. Typical resonator parameters include 65 cm mirror separation, 1-3% output coupling and 85% of the losses from the small mirror. A half-symmetric resonator with one flat and one curved mirror has also been investigated. The calculated values of Q are in reasonably good agreement with the cold test measurements.