Temperature Effect on Drying and Swelling of Kappa Carrageenan Gels: A Steady State Fluorescence Study

Summary: A novel technique based on in situ steady state fluorescence (SSF) measurements is introduced for studying drying and swelling of κ- carrageenan (kappa carrageenan) gels at various temperatures. κ- carrageenan gels were completely dried and then swelled in water vapor. Pyranine was embedded in κ- carrageenan and used as a fluorescence probe. Scattered light intensities, I_sc and fluorescence intensities, I were monitored during the drying and swelling of κ- carrageenan gels. It was observed that the fluorescence intensity decreased linearly as drying time was increased. A simple model consisting of Case II diffusion was used to quantify the drying processes of the κ- carrageenan gels. This moving boundary model provided packing constant, k₀. During swelling, fluorescence intensity increased exponentially as time is increased. The increase in I, was modeled using Li-Tanaka equation from which swelling time constants, τ_c and cooperative diffusion coefficients, D_c were determined. It was observed that swelling time constants, τ_c decreased and diffusion coefficients, D_c increased as the swelling temperature was increased. Activation energies for drying and swelling were also obtained and found to be 53.9 and 47.2 kJ mol⁻¹, respectively.     

Numerical solutions of the Gardner equation by extended form of the cubic B-splines

The extended definition of the polynomial B-splines may give a chance to improve the results obtained by the classical cubic polynomial B-splines. The optimum value of the extension parameter can be determined by scanning some intervals containing zero. This study aims to solve some initial boundary value problems constructed for the Gardner equation by the extended cubic B-spline collocation method. The test problems are derived from some analytical studies to validate the efficiency and accuracy of the suggested method. The conservation laws are also determined to observe whether the test problems remain constant as expected from the theoretical aspect. The stability of the proposed method is investigated by the von Neumann analysis.     

Structure–reactivity relationships of alkyl α‐hydroxymethacrylate derivatives

A series of alkyl α‐hydroxymethacrylate derivatives with various secondary functionalities (ether, ester, carbonate, and carbamate) and terminal groups (alkyl, cyano, oxetane, cyclic carbonate, phenyl and morpholine) were synthesized to investigate the effect of intermolecular interactions, H‐bonding, π–π interactions, and dipole moment on monomer reactivity. All of the monomers except one ester and one ether derivative are novel. The polymerization rates, determined by using photo‐DSC, showed the average trend (aromatic carbamate > hydroxyl > ester > carbonate ～ aliphatic carbamate ～ ether), with several exceptions due to the differences in terminal groups. There is a correlation between the chemical shift differences of the double bond carbons, the calculated dipole moments, and the reactivities only for nonhydrogen bonded monomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Electrokinetic and electrorheological properties of poly(vinyl chloride)/polyindole conducting composites

In this study, poly(vinyl chloride) (PVC), polyindole (PIN), and PVC/PIN conducting composites having five different compositions were used. Particle sizes, densities, dielectric constants, and sedimentation ratios of the materials were determined. The zeta‐potentials of the samples were measured in aqueous and nonaqueous (silicone oil [SO]) media. The dispersions prepared in SO were subjected to external electric field strength, and their electrorheological properties were investigated. Then the effects of dispersed particle volume fraction, shear rate, external electric field strength, frequency, and temperature onto electrorheological activities of the dispersions were examined. Further, creep and creep‐recovery tests were applied to the PIN/SO and PVC/PIN/SO dispersions, and reversible viscoelastic deformations were observed. Finally, the vibration damping capacity of PVC (66%)/PIN (34%)/SO dispersion system was tested by using an automobile shock absorber. Copyright © 2011 John Wiley & Sons, Ltd.     

Understanding kindergarten teachers’ perspectives of teaching basic geometric shapes: a phenomenographic research

Geometry is one of the disciplines children involve within early years of their lives. However, there is not much information about geometry education in Turkish kindergarten classes. The current study aims to examine teachers’ perspectives on teaching geometry in kindergarten classes. The researchers inquired about teachers’ in-class experiences in geometry and asked a series of questions such as “what are the benchmarks in your kindergarten class?”; “what kind of tools and materials you use to teach geometry in your class?”; “what shape do you teach first in your kindergarten class?”; “what do you expect to hear when you asked your students ‘what is square’?”; “how do you teach rectangular?”. The study utilized one of the qualitative research methods, namely phenomenography, to collect the data and analyze the data. The study involved with eight kindergarten teachers who work in different schools in central Kutahya, Turkey. The researchers collected data by conducting face-to-face half-structured interviews. The findings of this phenomenographic research showed that kindergarten teachers have some difficulties in teaching geometry and have lack of knowledge and skills in teaching geometry in kindergarten classes.     

A computational study on the amine-oxidation mechanism of monoamine oxidase: insight into the polar nucleophilic mechanism

The proposed polar nucleophilic mechanism of MAO was investigated using quantum chemical calculations employing the semi-empirical PM3 method. In order to mimic the reaction at the enzyme's active site, the reactions between the flavin and the p-substituted benzylamine substrate analogs were modeled. Activation energies and rate constants of all the reactions were calculated and compared with the published experimental data. The results showed that electron-withdrawing groups at the para position of benzylamine increase the reaction rate. A good correlation between the log of the calculated rate constants and the electronic parameter (sigma) of the substituent was obtained. These results agree with the previous kinetic experiments on the effect of p-substituents on the reduction of MAO-A by benzylamine analogs. In addition, the calculated rate constants showed a correlation with the rate of reduction of the flavin in MAO-A. In order to verify the results obtained from the PM3 method single-point B3LYP/6-31G*//PM3 calculations were performed. These results demonstrated a strong reduction in the activation energy for the reaction of benzylamine derivatives having electron-withdrawing substituents, which is in agreement with the PM3 calculations and the previous experimental QSAR study. PM3 and B3LYP/6-31G* energy surfaces were obtained for the overall reaction of benzylamine with flavin. Results suggest that PM3 is a reasonable method for studying this kind of reaction. These theoretical findings support the proposed polar nucleophilic mechanism for MAO-A.     

Synthesis and fluorescence sensing properties of a new naphthalimide derivative of calix[4]arene

A new naphthalimide derivative of calix[4]arene was synthesized as a highly selective fluorescent compound for Cu²⁺ among the selected metal ions. This compound was examined for its fluorescent properties toward different metal ions (Na⁺, Li⁺, Mg²⁺, Ni²⁺, Ba²⁺, Ca²⁺, Cu²⁺, Pb²⁺, Zn²⁺) and anions (F^?, Cl^?, Br^?, ${\text{H}}_2{\text{PO}}_4^{-}$, ${\text{NO}}_3^{-}$, I^?, ${\text{HSO}}_4^{-}$, CH₃COO^?) by UV, NMR and fluorescence spectroscopy.     

Reactions of acyl phosphonates with organoaluminum reagents: a new method for the synthesis of secondary and tertiary α-hydroxy phosphonates

The reactions of organoaluminum reagents (trimethylaluminum, triethylaluminum, etc.) with aryl and alkyl acyl phosphonates, which lead to the formation of α-hydroxy phosphonates in moderate to good yields, are reported. This method provides easy access to secondary and tertiary α-hydroxy phosphonates depending on the reaction conditions. The reactions of triethylaluminum with a series of acyl phosphonates at 0 °C gave the secondary α-hydroxy phosphonates, while at −100 °C they afford the tertiary α-hydroxy phosphonates.     

The determination of β-agonist residues in bovine tissues using liquid chromatography–tandem mass spectrometry

We aimed to develop a rapid, simple and reproducible method based on LC–tandem mass spectrometry (LC–MS/MS) to analyze β-agonist residues (clenbuterol, zilpaterol, ractopamine and isoxsuprine) in bovine tissues. The method was validated in accordance with the European Council Decision 2002/657/EC. The samples were homogenized, and then 10 mL of an acetate buffer was added to a 5-g sample. The sample was then centrifuged at 12,000 rpm and filtered. Sodium hydroxide (2 m ) was added to adjust pH of the sample that was centrifuged again. The extract was filtered through a solid-phase extraction column. The residue was re-dissolved in 250 μL acetonitrile and then subjected to LC–MS/MS. The separation was done on a C₁₈ column. The mobile phase consisted of 0.1% formic acid in deionized water and 0.1% formic acid in methanol. The mean recoveries of β-agonists were in the range of 84.3%–119.1% with relative standard deviations (%RSDs) of 0.683%–4.05%. Decision limits and detection capabilities of the analytes ranged from 0.0960 to 4.9349 μg/kg and from 0.0983 to 5.0715, respectively. This method was used to detect four β-agonists in 100 bovine muscle, 100 liver and 100 kidney tissues from a slaughterhouse. No residue was found above the maximum residue limit level.     

One‐Step Microfluidic Coating of Phospholipid Microbubbles with Natural Alginate Polymer as a Delivery System for Human Epithelial Lung Adenocarcinoma

In this study, the neoplastic drug frequently used in the treatment of lung cancer, carboplatin is loaded to microbubbles via a microfluidic platform. In order to increase the drug loading capacity of microbubbles, carboplatin is encapsulated into alginate polymer layer. The phospholipid microbubbles (MBs) are synthesized by MicroSphere Creator, which is connected with T‐junction and micromixer for the treatment with CaCl₂ solution to provide gelation of the alginate coated phospholipid microbubbles (AMBs). The carboplatin loaded alginate coated phospholipid microbubbles (CAMBs) result in 12.2 ± 0.21 µm mean size, obtained by mixing with 0.05% CaCl₂ using T‐junction. The cytotoxic activities of the synthesized MBs, AMBs, and CAMBs are also investigated with the 3‐(4,5‐Dimethyl‐2‐thiazolyl)‐2,5‐diphenyl‐2H‐tetrazolium bromide) (MTT) and live/dead fluorescent dying assays in the A549 and BEAS‐2B cell lines. The one‐step microfluidic coating of lipid microbubbles with natural alginate polymer appears to be a promising strategy for enhanced drug reservoir properties.