Isolation of lignosulfonate with low polydispersity index

<正>Lignosulfonate with low polydispersity index of 1.178-1.210 was isolated by gel column chromatography of Sephacryl S-100 eluted with 0.2 mol/L of NaNO_3 aqueous solution,whereas nearly monodisperse ligosulfonate fraction with polydispersity of 1.0(57 can be obtained after chromatographic separation twice.This method provides an available approach to investigate the structure and characteristics of lignosulfonate.     

Templating α-helical poly(L-lysine)/polyanion complexes by nanostructured uniaxially oriented ultrathin polyethylene films

We report a templating effect of uniaxially oriented melt-drawn polyethylene (MD-PE) films on α-helical poly(L-lysine)/poly(styrenesulfonate) (α-PLL/PSS) complexes deposited by the layer-by-layer (LBL) method. The melt-drawing process induced an MD-PE fiber texture consisting of nanoscale lamellar crystals embedded in amorphous regions on the MD-PE film surface whereby the common crystallographic c axis is the PE molecular chain direction parallel to the uniaxial melt-drawing direction. The MD-PE film and the α-PLL/PSS deposit were analyzed by atomic force microscopy (AFM) and in situ attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) using polarized light as a complementary method. Both methods revealed that α-PLL/PSS complexes adsorbed at the MD-PE surface were anisotropic and preferentially oriented perpendicular to the crystallographic c direction of the MD-PE film. Quantitatively, from AFM image analysis and ATR-FTIR dichroism of the amide II band of the α-PLL, mean cone opening angles of 12-18° for both rodlike α-PLL and the anisotropic α-PLL/PSS complexes with respect to the PE lamellae width direction were obtained. A model for the preferred alignment of α-PLL along the protruding PE lamellae is discussed, which is based on possible hydrophobic driving forces for the minimization of surface free energy at molecular and supermolecular topographic steps of the PE surface followed by electrostatic interactions between the interconnecting PSS and the α-PLL during layer-by-layer adsorption. This study elucidates the requirements and mechanisms involved in orienting biomolecules and may open up a path for designing templates to induce directed protein adsorption and cell growth by oriented polypeptide- or protein-modified PE surfaces.     

Carbon nanotubes-assisted polyacrylamide gel electrophoresis for enhanced separation of human serum proteins and application in liverish diagnosis

The application of pore-gradient polyacrylamide gel electrophoresis (PG-PAGE) incorporated with carbon nanotube modified by Triton X-100 and carboxylation so as to improve the separation of human serum proteins is reported. The novel PG-PAGE was made by adding water-soluble single-walled carbon nanotubes (CNTs) when preparing the polyacrylamide gel. Significant improvements in separation of complement C3 protein and haptoglobin (Hp) in human serum were achieved. It was estimated that the interactions between the hydrophilic groups on the proteins and the surface of the CNTs result in different adsorption kinetics of complement C3 and Hp subtype on the nanoparticles incorporated in the gel, thus enhancing the separation of the two proteins in serum. This new CNT matrix-assisted PG-PAGE method for enhanced separation of complement C3 and Hp in human serum was successfully applied to distinguish the samples from liverish patients and healthy people.     

A simple and sensitive fluorescence quenching method for the determination of H(2)O(2) using Rhodamine B and FE(3)O(4) nanocatalyst

In pH 1.99 sodium acetate-HCl buffer solutions at 60 °C, Rhodamine B exhibited a strong fluorescence peak at 584 nm using an excitation wavelength of 548 nm. The fluorescence quenching occurred when Fe₃O₄ nanoparticles catalyzed H₂O₂ oxidation of Rhodamine B. Under the chosen conditions, the fluorescence intensity at 584 nm decreased when the concentration of H₂O₂ increased. The fluorescence quenching intensity is linear with the concentration of H₂O₂ in the range of 10–200 nmol/L. Thus, a new and simple and sensitive nanocatalytic fluorescence method was proposed for the determination of H₂O₂ in synthetic sample, with satisfactory results.     

A railway track dynamics model based on modal substructuring and a cyclic boundary condition

This article presents a technique for modelling the coupled dynamics of a railway vehicle and the track. The method is especially useful for simulating the dynamics of high speed trains running on nonlinear tracks. The main hypothesis is a cyclic system: an infinite track on which there is an infinite set of identical vehicles spaced at a regular interval of distance. Thus the main problems of the finite-length track models (e.g. the waves that reflect at the end of the track and interact with the vehicle; and the time interval of integration must be shorter than the track length divided by the velocity) are avoided. The flexibility of the method can be observed from the case studies presented in the present work: a vehicle passing over a hanging sleeper, and the vehicle-track dynamics for different ballast compaction cases. The results show the influence of the hanging sleeper gap on the wheel-rail contact forces, and the bending moment at the sleeper for different ballast compaction cases.     

适配体修饰金硒纳米合金共振散射光谱法检测痕量Hg2+

用硼氢化钠还原法制备了金硒(AuSe)纳米合金.用单链核酸适配体(aptamer)修饰AuSe纳米合金制备了汞离子的核酸适配体纳米探针(Apta-AuSe).在pH 6.8 Na2HPO4-NaH2PO4缓冲溶液中及NaCl存在下,Apta-AuSe纳米探针亦不聚集;当Hg2+存在时,它可以稳定aptamer序列中的T...     

高光谱技术分析茶树叶片中叶绿素含量及分布

植物叶片叶绿素含量及分布是植物营养信息表达的一个重要指标.以茶树为研究对象,利用高光谱技术分析茶树叶片中叶绿素含量及其分布.通过采集茶树鲜叶的高光谱图像,利用7种不同的算法从高光谱数据中提取相应的特征参数,并根据特征参数和叶绿素含量的参考测量值分别拟合出相应的预测模型.结果显示,二次土壤调节植被指数算法提取的特征参数最...     

ICP-MS分析四城市血铅浓度及同位素指纹地区特征

通过电感耦合等离子体质谱(ICP-MS)对北京、太原、苏州、成都四城市40份成人血铅进行了浓度及其同位素比值的同时测定,以考查不同地区血铅的地区性特征。结果显示工业城市成都、太原血铅浓度高于非工业城市北京、苏州,说明工业污染仍是造成高血铅的重要因素;同位素测试结果显示各城市血铅同位素比值具有特征分布区域和分布特点,食源性铅可能已取代大气铅成为北京等发达城市血铅的主要来源,全球化带来的的物产多样化削弱了一些发达城市铅污染的地区特征。     

Optimal credit period and lot size for deteriorating items with expiration dates under two-level trade credit financing

In a supplier-retailer-buyer supply chain, the supplier frequently offers the retailer a trade credit of S periods, and the retailer in turn provides a trade credit of R periods to her/his buyer to stimulate sales and reduce inventory. From the seller’s perspective, granting trade credit increases sales and revenue but also increases opportunity cost (i.e., the capital opportunity loss during credit period) and default risk (i.e., the percentage that the buyer will not be able to pay off her/his debt obligations). Hence, how to determine credit period is increasingly recognized as an important strategy to increase seller’s profitability. Also, many products such as fruits, vegetables, high-tech products, pharmaceuticals, and volatile liquids not only deteriorate continuously due to evaporation, obsolescence and spoilage but also have their expiration dates. However, only a few researchers take the expiration date of a deteriorating item into consideration. This paper proposes an economic order quantity model for the retailer where: (a) the supplier provides an up-stream trade credit and the retailer also offers a down-stream trade credit, (b) the retailer’s down-stream trade credit to the buyer not only increases sales and revenue but also opportunity cost and default risk, and (c) deteriorating items not only deteriorate continuously but also have their expiration dates. We then show that the retailer’s optimal credit period and cycle time not only exist but also are unique. Furthermore, we discuss several special cases including for non-deteriorating items. Finally, we run some numerical examples to illustrate the problem and provide managerial insights.     

An integrated inventory model with quality improvement and two-part credit policy

Trade credit financing plays a vital role in current business operations. Vendors extend payment dates to encourage sales, and buyers are not required to pay immediately after receiving products. This is equivalent to receiving a price reduction. Besides, buyers reduce their need for capital from bank loans. In addition, a number of defective products are produced during the production process. The number of defective items influences the on-hand inventory levels of buyers, service levels, and frequency of orders. To ensure that the analysis incorporates a realistic production environment, we developed an integrated inventory model with a two-part trade credit and considered an imperfect production process that can be improved by capital investment. The objective was to determine the optimal ordering, shipping, and quality improvement policies to maximize joint total profit. An iterative algorithm was established to determine the optimal strategy. Furthermore, a sensitivity analysis was conducted to examine the effects of changing parameter values on the optimal solution.