A transannular reaction during the base catalysed rearrangement of bicyclo(4.3.0)-2β-hydroxy-2α-vinyl-1β-Methyl-8-oxo-Δ6,7-nonene

Synthesis and rearrangement of bicyclo(4.3.0) - 2β - hydroxy - 2α - vinyl - 1β - methyl - 8 - oxo - Δ⁶ - nonene was observed to yield a transannular reaction product tricycio - (6.3.0.0^1,8) - 2 - methyl - 8α - hydroxy - 4 - oxo - Δ² - undecene 16. Spectral evidence supports the assigned structure.     

Cationic polymerization with boron halides. V. Synthesis of poly(isobutylene-b-styrene) and poly(styrene-b-isobutylene)

Block copolymers of isobutylene and styrene, PIB-b-PSt and PSt-b-PIB, have been prepared by a two-step synthesis involving (1) preparation of terminally chlorinated (telechelic) polyisobutylene or polystyrene “prepolymers” by using the H₂O/BCl₃ initiator system and (2) blocking from these telechelic prepolymers a second polymer segment by using an alkyaluminum, e.g., Et₂AlCl coinitiator. The telechelic polyisobutylene and polystyrene contain tertiary and benzylic chlorine termini, respectively. Block copolymer characterization included detailed selective solvent extraction procedures, coupled with GPC determinations, PMR, solubility, and intrinsic viscosity studies. The synthesis of PIB-b-PSt and PSt-b-PIB provides direct chemical evidence for the presence and position of active chlorine termini in BCl₃-coinitiated olefin polymerizations.     

Precise and accurate determination of the stoichiometry of CuInS2 semiconductor material by electrochemical methods

Summary CuInS₂ is one of the important I–III–VI₂ ternary compounds which has in recent years received increasing interest in semiconductor science. In this study an electrochemical method has been developed based on a limited amount of available sample (0.5–10mg) for the precise and accurate determination of CuInS₂ composition. After decomposition of the sample in concentrated HNO₃ under pressure, copper and indium were sequentially determined by constant potential coulometry, and sulfur (as sulfate) by amperometric titration. Various experimental parameters which ensure high precision and accuracy of the results were carefully evaluated and calibrated. The overall errors for the determination of copper, indium and sulfur in a 10 mg sample were found to be +0.10%, –0.12% and +0.16%, respectively, which fullfills the requirement for accurate stoichiometric assessment.

---

Reproduzierbare und genaue Bestimmung der Stöchiometrie von CuInS₂-Halbleitermaterial mit Hilfe elektrochemischer Verfahren

---

Presented at the 10th International Symposium on Microchemical Techniques, August 25–29, 1986, Antwerp, Belgium     

LC–MS Determination and Pharmacokinetic Study of a Novel Sulfonylurea: Potential Hypoglycemic Agent in Rat Plasma

To support preclinical pharmacokinetic investigation of 1-[4-[2-(4-bromobenzene-sulfonaminoethyl)phenylsufonyl]-3-(trans-4-methylcyclohexyl)urea (G004), a rapid, sensitive and specific high-performance liquid chromatography–electrospray ionization mass spectrometry (LC–ESI-MS) method was developed and validated. Glibenclamide was employed as internal standard. After liquid–liquid extraction the analyte was analyzed on a Kromasil C₁₈ column (150 × 2.0 mm i.d.) with a mobile phase consisted of acetonitrile–water (0.05% acetic acid), 30:70 (v/v). The flow rate was 0.2 mL min⁻¹. Detection was performed on a quadrupole mass spectrometer using an electrospray ionization interface and the selected-ion monitoring (SIM) mode. The retention time was about 3.5 and 4.2 min for Glibenclamide and G004, respectively. The assay was linear over the concentration range of 2.0–500.0 ng mL⁻¹. Extraction Recovery of G004 in rat plasma was more than 87%. The intra- and inter-assay precision was lower than 11.5% (CV). This validated method was successfully applied to the pharmacokinetics of G004 in rats.     

Determination of metoprolol enantiomers in human urine by GC-MS using (−)-α-methoxy-α-(trifluoromethyl)phenylacetyl chloride as a chiral derivatizing agent

Summary A method for the assay of R-(+)- and S-(−)- metoprolol in human urine has been developed using gas chromatography-mass spectrometry. The method involved purification by liquid-liquid extraction and derivatization with N-methyl-N-(trimethylsilyl)trifluoroacetamide to form an O-silyl ether, followed by subsequent chiral derivatization with (−)-α-methoxy-α-(trifluoromethyl)phenylacetyl chloride to form diastereomeric amide. The reaction was rapid and the diastereomeric derivatives were well resolved. Quantitation was performed by selected-ion monitoring of fragment ions of the diastereomers in electron impact ionization mode. No racemization was found during the reaction. The detection limit was 0.5 ng·mL⁻¹. The intra-day variation ranged between 0.38 and 7.86% in relation to the measured concentration and inter-day variation was 2.26–8.06%. The method has been applied to the determination of R-(+)-and S-(−)- metoprolol in human urine from healthy volunteers dosed with racemic metoprolol tartrate.     

Ultrahigh field MAS NMR dipolar correlation spectroscopy of the histidine residues in light-harvesting complex II from photosynthetic bacteria reveals partial internal charge transfer in the B850/His complex.

Low-temperature 15N and 13C CP/MAS (cross-polarization/magic angle spinning) NMR has been used to analyze BChl-histidine interactions and the electronic structure of histidine residues in the light-harvesting complex II (LH2) of Rhodopseudomonas acidophila. The histidines were selectively labeled at both or one of the two nitrogen sites of the imidazole ring. The resonances of histidine nitrogens that are interacting with B850 BChl a have been assigned. Specific 15N labeling confirmed that it is the tau-nitrogen of histidines which is ligated to Mg2+ of B850 BChl molecules (beta-His30, alpha-His31). The pi-nitrogens of these Mg2+-bound histidines were found to be protonated and may be involved in hydrogen bond interactions. Comparison of the 2-D MAS NMR homonuclear (13C-13C) dipolar correlation spectrum of [13C6,15N3]-histidines in the LH2 complex with model systems in the solid state reveals two different classes of electronic structures from the histidines in the LH2. In terms of the 13C isotropic shifts, one corresponds to the neutral form of histidine and the other resembles a positively charged histidine species. 15N-13C double-CP/MAS NMR data provide evidence that the electronic structure of the histidines in the neutral BChl a/His complexes resembles the positive charge character form. While the Mg...15N isotropic shift confirms a partial positive charge transfer, its anisotropy is essentially of the lone pair type. This provides evidence that the hybridization structure corresponding to the neutral form of the imidazole is capable of "buffering" a significant amount of positive charge.     

Continuous flow system for the determination of trace vanadium in natural waters utilizing in-line preconcentration/separation coupled with catalytic photometric detection

A sensitive and rapid method is presented for the determination of vanadium at ng to sub-ng ml(-1) levels in natural waters, in which in-line preconcentration/separation is directly coupled with catalytic detection of vanadium in a flow-injection system. Vanadium was adsorbed on a small column packed with Sephadex G-25 gel and desorbed with a small volume of 0.010 M HCl. The catalytic action of vanadium on the oxidation of chromotropic acid (1,8-dihydroxy-3,6-naphthalenedisulphonic acid) by bromate in pH 3.8 buffered media was used in the sensitive determination of vanadium. Effective preconcentration/separation of trace vanadium can be achieved from Fe(III), Cu(II) and a large excess of sodium chloride in seawater sample. A linear calibration using a 5 m sample loop was obtained for vanadium in the range 0-2.5 ng ml(-1). The limit of detection was 0.02 ng ml(-1) and the relative standard deviation was 1.2% for 1.0 ng ml(-1) vanadium (n=5). The present FIA system is rapid and sensitive and can be readily applied to river water and coastal seawater samples.     

Intracavity laser atomic absorption spectrometry with graphite furnace atomizer or pulsed laser sampler

An absorption intracavity laser spectrometer with two types of sample vaporization systems (graphite furnace electrothermal atomizer or laser sampler) is described that can be used for the determination of trace amounts of metals (Al, Cr, Fe and Mn) in liquid samples and at the surface of solid targets. The limits of detection for the elements tested are lower than those obtained by modern conventional spectrometers. The examined technique provides a wide dynamic range of linear standard calibration curves.     

Esterolytic activity of imidazole-containing polymers. Synthesis and characterization of copoly[1-alkyl-4- or 5-vinylimidazole/4(5)-vinylimidazole] and its catalytic activity in the hydrolysis of p-nitrophenyl acetate

The water-soluble monomers, 1-methyl-4-vinylimidazole, 1-methyl-5-vinylimidazole, 1-ethyl-5-vinylimidazole, and 1-propyl-5-vinylimidazole have been synthesized, polymerized, and copolymerized with 4(5)-vinylimidazole. The copolymers were characterized by ¹⁴C-labeling, NMR, pK_a determination and viscosity measurements. The monomer reactivity ratios determined by ¹⁴C counting are r₁ = 1.04; r₂ = 0.94 [M₁ = 4(5)-vinylimidazole, M₂ = 1-methyl-4-vinylimidazole] and r₁ = 1.01; r₂ = 0.86 [M₁ = 4(5)-vinylimidazole, M₂ = 1-methyl-5-vinylimidazole]. The esterolytic activity of the copolymers for the hydrolysis of p-nitrophenyl acetate (PNPA) at pH 7–8 in 28.5% ethanol–water was higher than that of the mixtures of homopolymers. At pH 5–6 the esterolytic activities of the copolymers and the mixtures were similar. The most efficient esterolytic activity for PNPA hydrolysis at pH 7.11 in 28.5% ethanol–water occurred for copolymers containing 75 mole % 4(5)-vinylimidazole and for copolymers containing 1-methyl-4-vinylimidazole rather than 1-methyl-5-vinylimidazole.