SiGe HBT大信号等效电路模型

基于SiGe HBT(异质结双极晶体管)的物理模型，建立了描述SiGe HBT的大信号等效电路模型.该等效电路模型考虑了准饱和效应和自热效应等，模型分为本征和非本征两部分，物理意义清晰，拓扑结构相对简单.该模型嵌入了PSPICE软件的DEVEO(器件方程开发包)中.在PSPICE软件资源的支持下，利用该模型对SiGe HBT器件进行了交直流特性模拟分析，模拟结果与理论分析结果相一致，并且与文献报道的结果符合较好. 关键词： SiGe HBT 等效电路模型 PSPICE     

On the integral representation formula for a two‐component elastic composite

The aim of this paper is to derive, in the Hilbert space setting, an integral representation formula for the effective elasticity tensor for a two‐component composite of elastic materials, not necessarily well‐ordered. This integral representation formula implies a relation which links the effective elastic moduli to the N‐point correlation functions of the microstructure. Such relation not only facilitates a powerful scheme for systematic incorporation of microstructural information into bounds on the effective elastic moduli but also provides a theoretical foundation for inverse‐homogenization. The analysis presented in this paper can be generalized to an n‐component composite of elastic materials. The relations developed here can be applied to the inverse‐homogenization for a special class of linear viscoelastic composites. The results will be presented in another paper. Copyright © 2005 John Wiley & Sons, Ltd.     

用自适应MG法,FMG法求解Helmholtz方程

本文针对Ｖ循环、Ｗ循环和多重网格法中最优光滑次数及循环体个数难以确定的缺点，以Ｈｅｌｍｈｏｌｔｚ方程为例给出自适应的多重网格算法和自适应的完全多重网格算法。     

Synergistically toughening high‐density polyethylene with calcium carbonate and elastomer

The microstructure, impact strength, and rheological properties of blends consisting of high‐density polyethylene (HDPE) and maleated poly (ethylene‐octene) (POEg) and/or calcium carbonate (CaCO₃) were investigated. The improvement of impact strength of HDPE/POEg was limited due to the high miscibility between them. The introduction of CaCO₃ had a negative impact on the toughness of the matrix because of the poor interfacial adhesion. In ternary blends of HDPE/POEg/CaCO₃, an elastomer layer was formed around CaCO₃ particles due to the strong interaction between POEg and CaCO₃, which improves the HDPE‐CaCO₃ interfacial strength and the toughness of the blends. A significant enhancement of dynamic viscosity, storage modulus, and the low‐shear viscosity were observed as the results of the high miscibility of HDPE with POEg and strong interaction between POEg and CaCO₃. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3213–3221, 2005     

Crystallization behavior and thermal stability of poly(trimethylene terephthalate)/clay nanocomposites

Poly(trimethylene terephthalate) (PTT)/montmorillonite (MMT) nanocomposites were prepared by the solution intercalation method. Two different kinds of clay were organomodified with an intercalation agent of cetyltrimetylammonium chloride (CMC). X‐ray diffraction (XRD) indicated that the layers of MMT were intercalated by CMC, and interlayer spacing was a function of the cationic exchange capacity of clay. The XRD studies demonstrated that the interlayer spacing of organoclay in the nanocomposites depends on the amount of organoclay. From the results of differential scanning calorimetric analysis, it was found that clay behaves as a nucleating agent and enhances the crystallization rate of PTT. The maximum enhancement of the crystallization rate for the nanocomposites was observed in nanocomposites containing about 1 wt % organoclay with a range of 1–15 wt %. From thermogravimetric analysis, we found that the thermal stability of the nanocomposites was enhanced by the addition of 1–10 wt % organoclay. According to transmission electron microscopy, the organoclay particle was highly dispersed in the PTT matrix without a large agglomeration of particles for a low organoclay content (5 wt %). However, an agglomerated structure did form in the PTT matrix at a 15 wt % organoclay content. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2902–2910, 2003     

Monolithic two-dimensional surface emitting arrays of GaAs/AlGaAs lasers

Surface emitting lasers are of interest for various applications such as monolithic two-dimensional arrays and optical interconnects for integrated optics. Moreover, surface emitting lasers offer the advantage of wafer processing and testing. Several approaches for achieving surface emission are described. In addition, TRW s fabrication of a large monolithic two dimensional array of GaAs/AlGaAs surface emitting lasers which contains a total of 100 lasers is reported.     

BIFURCATION OF TWO-DIMENSIONAL KURAMOTO-SIVASHINSKY EQUATION

This paper deals with the steady state bifurcation of the K-S equation in two spatial dimensions with periodic boundary value condition and of zero mean. With the increase of parameter a, the steady state bifurcation behaviour can be very complicated. For convenience, only the cases a=2 and a=5 witl be discussed. The asymptotic expressions of the steady state solutions bifurcated from the trivial solution near a=2 and a=5 are given. And the stability of thenontriviat sotutions bifurcated from a=2 is studied. Of course, the cases a=n^2 m^2,n,m∈N(a≠2,5) can be similarly discussed by the same method which is used to discussing the cases a=2 and a= 5.     

聚硅烷—类崭新的非线性光学材料

本文重点介绍了聚硅烷这类崭新的非线性光学材料,评述了其优点、研究现状、影响其三阶非线性光学特性的因素以及未来的发展方向.     

Near- and mid-infrared spectroscopy of sol–gel derived ormosils: vinyl and phenyl silicates

The suitability of ormosils as photonic materials was investigated. Vinyl and phenyl silicates were synthesised below 100°C. A detailed assignment of mid-infrared vibrational absorption bands is given. This allowed assignment of overtone and combination bands in the near-infrared region and an assessment of residual water contamination, which is low and can be expelled by evacuation. These ormosils have low intrinsic and extrinsic optical absorption in the visible spectral region and at useful wavelengths in the near-infrared.