On-line filtration system for determining total chromium and chromium in the soluble fraction of industrial effluents by flow injection flame atomic absorption spectrometry

Two manifolds were assessed for the purpose of determining both the total chromium content and that present as a soluble form in industrial effluents by flow injection flame atomic absorption spectrometry (FI-FAAS). To determine the chromium content in the soluble fraction the samples were used without additional treatment, a 0.45 microm filter being included in the FI system. To determine the total chromium content, the samples were acidified with nitric acid 20% (v/v) and heated for 30 s in a microwave oven (temperatures of about 70 degrees C were reached). The problem posed by the very different concentration range in which total and soluble chromium are present was overcome by using programmed flow rate methodology and by only partially emptying the sample loop. A personal computer controlled both the rotation speed of a peristaltic pump and the volume of sample injected into the system, thus obtaining the dispersion degree required. Using the manifold proposed, the chromium content in the soluble fraction can be determined in the 0.5-20 microg mL(-1) range using a 10 microg mL(-1) single standard for calibration. To determine the total chromium content, a calibration line in the 20-200 microg mL(-1) range was obtained using a single 50 microg mL(-1) chromium standard solution. The reliability of the semi-automatic devices was verified by comparing the results obtained with those found by treating the samples and using both FAAS in a conventional way and a spectrophotometric method using diphenylcarbazide at the 95% confidence level (ANOVA test). The proposed procedures showed a RSD lower than +/-3%.     

Electrodeposition of cobalt on stainless steel foils. Preparation of57Co sources for Mössbauer experiments

Conditions for the electrodeposition of⁵⁹Co and⁵⁷Co on stainless steel foils have been studied. A set of electrolytic parameters has been determined to get a reasonably good electrodeposited sample. The⁵⁷Co electrodeposited foil was then introduced in a quartz tube to be annealed in an argon flow. The final product was a 11 Ci Mössbauer source for college experiments which was succesfully tested by obtaining spectra of stainless steel and sodium nitroprusside.     

Determination of some trace elements in human tooth enamel

Determination of seven elements (Cu, Fe, Mg, Mn, Pb, Sr and Zn) in whole enamel and surface layers of extracted non-carious human teeth by FAAS, ETA AAS, ICP-AES and ICP-MS (Pb) is demonstrated. Techniques are described for obtaining whole enamel and its acid dissolution. Fifty microm width enamel layers from outer enamel surface to a 200 microm depth were successively etched in 1 mL of 3 M HClO4 for 3 min dissolution periods. Enamel samples were analyzed for populations under and over 20 years of age and enamel from Bronze Age teeth. Concentrations of microelements in the whole enamel and in the first surface layer (50 microm depth) were compared. With exception of Sr and Mg, all elements show significantly higher concentrations in the first layer than in whole enamel and higher concentration in teeth of individuals over 20 years, which demonstrate the cumulative effect of these elements. The Cu, Fe, Mn, Pb and Zn concentrations in four layers of erupted and non-erupted teeth decreased while Mg and Sr concentrations increased toward enamel-dentine junction. The concentrations of most elements were almost constant as they approached the 150 microm layer. This concentration gradient may result from interaction between saliva and teeth and supports the hypothesis that the surface de- and re-mineralization process is effective at most to 150 microm from the enamel surface.     

Coordination polymers. IX

Poly-(butanediol-1,4-adipate) and poly-(diethyleneglycol-succinate) polyesters and their ionized derivatives, containing Mg²⁺ and Zn²⁺ ions with different stoichiometric ratios to the chain-end COOH groups of the polyesters have been investigated by derivatograph.The thermal decompositions of the metal-containing polyesters differ significantly from those of the unionized polyesters. These differences are connected with the chemical repeating unit of the polyesters and the chemical nature of the metal ions, and proportional to the amount of the latter.An explanation is given of the catalytic effect of metal ions on the process of decomposition of the polyesters.

---

Zusammenfassung Poly-(butandiol-1,4-adipat) und Poly-(diethylenglycolsuccinat) polyester und ihre «ionisierten» Derivate — mit Mg²⁺ — und Zn²⁺-Ionengehalt in verschiedenen stöchiometrischen Verhältnissen zu den endständigen COOH-Gruppen der Polyester — wurden im Derivatographen untersucht.Die thermische Zersetzung der metallhaltigen Polyester unterscheidet sich wesentlich von nicht-ionisierten Polyestern. Diese Unterschiede sind mit den sich wiederholenden chemischen Einheiten der Polyester und der chemischen Beschaffenheit der Metallionen verbunden, und proportional dem Anteil derselben.Es wird eine Erklärung des katalytischen Effekts der Metallionen auf den Zersetzungsvorgang der Polyester gegeben.

---

-1,4 «» , Mg²⁺ Zn²⁺ . , «» . . .

     

Radiolysis of aqueous-ethanolic solution of tryptophan

The effect of ethanol on radiation stability of tryptophan during -irradiation of its aqueous solutions was investigated. In comparison with radiation losses of tryptophan irradiated in pure water, the losses in aqueous-ethanolic solutions are considerably higher and they increase with increasing ethanol concentration. Basic radiation products of tryptophan formed on irradiation of its aqueous-ethanolic solutions in consequence of the reaction of tryptophan with acetaldehyde as the main product of radiolysis of ethanol were followed by paper electrophoresis.     

Tritium volume activity in natural waters of the NPP Temelín region

With the use of the tritium monitoring network the samples of river water, air humidity and precipitation are collected and analysed for HTO in the vicinity of Temelín nuclear power plant.     

Novel method for the preparation of anionic surfactant-selective electrodes

A simple one-step synthesis is described for the functionalization of poly(vinyl chloride) used for the preparation of anionic surfactant-selective membrane electrodes. The method is based on the nucleophilic substitution of a fraction of the chlorine atoms bound to the poly(vinyl chloride) backbone by trimethylamine. The prepared slightly charged polymer gave rise to high-quality surfactant-selective electrode membranes, which had a Nernstian response, short response time, and appropriate stability.     

Studies on the conversions of diols and cyclic ethers—49: Stereochemistry of cyclodehydration of 1,4-diols on the action of brönsted and lewis acids: a comprehensive study

The stereochemistry of the cyclodehydration of (±)- and meso-2,5-hexanediol on the action of various dehydrating agents was investigated. The earlier assumed and confirmed intramolecular S_N2 mechanism for acid-catalysed ring-closure was found to hold in most cases. Various extents of racemisation can be observed on the action of certain Lewis acids, and the solvents concentrated H₂SO₄ and HMPT (hexamethyl phosporic acid triamide) under previously unexamined reaction conditions.     

Ein weiterer Beitrag zum Scandiumdicarbidproblem

Zusammenfassung Die bei 1850, 2000 bzw. 2300°C durch die Reduktion von Scandiumoxid mittels Kohlenstoff in dem der Scandiumdicarbidbildung entsprechenden Molverhältnis hergestellten Produkte wurden mit Wasser zersetzt und mit Hilfe der gleichzeitigen gaschromatographischen und massenspektrometrischen Analyse untersucht. Aus den Ergebnissen geht hervor, daß bei der Scandiumdicarbidbildung gleichzeitig ein weiteres Scandiumcarbid, höchstwahrscheinlich ein Sesquicarbid, entsteht.

---

Scandium(III) dicarbide problem. Further experimental results

Products obtained by the reduction of Sc₂O₃ with carbon at 1850, 2000 and 2300°C, resp., in the molar ratio corresponding to the scandium dicarbide were hydrolysed with water. Gaseous reaction products were analysed using gas chromatography combined with mass spectrometry. Results show, that during dicarbide formation another scandium carbide, probably sesquicarbide, is also formed.

---

---

Herrn Prof. Dr.H. Nowotny gewidmet.

---

7. Mitt.: Coll. Czech. Chem. Commun., im Druck.     

Determination of iron at ng/ml level by solid phase spectrophotometry after preconcentration on cation exchange filters

A cationic exchanger paper is used to retain analytes in solution and, after drying, to analyze directly by measuring the UV-Vis absorbance of the paper. The method was applied to determination of iron using its known 1,10-phenanthroline complex. Using 100 ml of sample the applicable concentration range was between 1.0 and 10.0 ng/ml with a detection limit of 0.2 ng/ml and a RSD around 2%. The method was applied to determination of iron total in snow, human serum and wine.