Fractionation of the human plasma proteome for monoclonal antibody proteomics‐based biomarker discovery 2: Antigen identification by dot‐blot array screening

Immunization with complex mixtures, like the human plasma resulted in the generation of cloned mAb libraries (PlasmaScan? and QuantiPlasma? libraries, with >1000 individual mAbs) reacting with a nonredundant set of antigenic epitopes. mAb proteomics refers to quasi‐hypothesis‐free profiling of plasma samples with nascent or cloned mAb libraries for the discovery of disease‐specific biomarkers. Once mAbs with biomarker potential have been identified, the next task is the determination of cognate antigens recognized by the respective mAbs. To determine the cognate protein antigen corresponding to each individual mAbs in the cloned mAb libraries, we have separated human plasma by consecutive steps of desalting and various chromatography procedures. The process resulted in 783 fractions, which we termed “Analyte Library” (AL). The AL represents the human plasma proteome in relatively low‐protein complexity fractions. Here, to determine the utility of the AL, we selected ten plasma proteins and checked for their presence in the fractions. Among the ten cases, the distribution of four selected plasma proteins matched expectations, as these proteins were present only in a few fractions corresponding to their physical, chemical, and biochemical properties. However, in six cases, we observed “smear” ‐like distribution or complete absence of the proteins, suggesting that protein–protein interactions or protein variants may alter the observed plasma distribution profiles. Nevertheless, we conclude that the AL is an efficient, high throughput tool to complement the mAb biomarker discovery process with cognate protein antigen identification for each mAbs.     

The wheeled three-link snake model: singularities in nonholonomic constraints and stick–slip hybrid dynamics induced by Coulomb friction

Nonlinear Dynamics - The wheeled three-link snake model is a well-known example of an underactuated robotic system whose motion can be kinematically controlled by periodic changes of its internal...     

The Euler obstruction of a function on a determinantal variety and on a curve

Given an analytic function germ f: (X, 0) → C on an isolated determinantal singularity or on a reduced curve, we present formulas relating the local Euler obstruction of f to the vanishing Euler characteristic of the fiber X ∩ f^-1(0) and to the Milnor number of f. Restricting ourselves to the case where X is a complete intersection, we obtain an easy way to calculate the local Euler obstruction of f as the difference between the dimension of two algebras.     

A note on holomorphic approximation in Banach spaces

Given a complex Banach space X and a holomorphic function f on its unit ball B, we discuss the problem whether f can be approximated, uniformly on smaller balls, by functions g holomorphic on all of X. Research partially supported by NSF grant DMS0700281.     

Influence of spectral and angular sensitivity on the readout of biological dosimeters

Biological systems used as biological dosimeters can possess different angular sensitivities from the detectors usually used in physical devices. A simple experimental setup has been developed and used to measure the angular sensitivity of uracil thin-layer biological dosimeters. Results of angular sensitivity measurements for uracil thin-layer dosimeters are presented using a Xe arc lamp as the UV source. According to the experiments described here, uracil thin-layer dosimeters show a cosine-type angular dependence. In several indoor experiments broadband UV meters are used to control the applied dose rate from a given artificial UV source. The experimental setup has been designed and used to verify experimentally the importance of spectral and angular sensitivity differences of biological and physical UV meters applied in biological experiments. Model calculations for two different irradiation systems, using different geometrical arrangements of artificial UV sources, are also presented. For these arrangements relative dose rates that could be measured with dosimeters of arbitrary spectral, but different angular sensitivity have been calculated.     

I(+1) transfer from diiodomalonic acid to malonic acid and a complete inhibition of the CO and CO2 evolution in the Briggs-Rauscher reaction by resorcinol

A recent report on an intense CO 2 and CO evolution in the Briggs-Rauscher (BR) reaction revealed that iodination of malonic acid (MA) is not the only important organic reaction in the classical BR oscillator. To disclose the source of the gas evolution, iodomalonic (IMA) and diiodomalonic (I2MA) acids were prepared by iodinating MA with nascent iodine in a semibatch reactor. The nascent iodine was generated by an iodide inflow into the reactor, which contained a mixture of MA and acidic iodate. Some CO2 and a minor CO production was observed during these iodinations. It was found that in an aqueous acidic medium the produced I2MA is not stable but decomposes slowly to diiodoacetic acid and CO2. The first-order rate constant of the I 2MA decarboxylation at 20 degrees C was found to be k1 = 9 x 10(-5) s(-1), which is rather close to the rate constant of the analogous decarboxylation of dibromomalonic acid under similar conditions (7 x 10(-5)s(-1)). From the rate of the CO2 evolution, the I2MA concentration can be calculated in a MA-IMA-I2MA mixture as only I2MA decarboxylates spontaneously but MA and IMA are stable. Following CO2 evolution rates, it was proven that I2MA can react with MA in the reversible reaction I2MA + MA <--> 2 IMA. The equilibrium constant of this reaction was calculated as K = 380 together with the rate constants of the forward k 2 = 6.2 x 10 (-2) M (-1)s(-1) and backward k-2 = 1.6 x 10(-4) M(-1)s(-1) reactions. The probable mechanism of the reaction is I(+1) transfer from I2MA to MA. The presence of I(+1) in a I2MA solution is demonstrated by its reduction with ascorbic acid. To estimate the fraction of CO2 coming from the decarboxylation of I2MA in an oscillatory BR reaction, the oscillations were inhibited by resorcinol. Unexpectedly, all CO2 and CO evolution was interrupted for more than one hour after injecting a small amount of resorcinol (10(-5) M initial concentration in the reactor). Finally, some implications of the newly found I(+1) transfer reactions and the surprisingly effective inhibition by resorcinol regarding the mechanism of the oscillatory BR reaction are discussed. The latter is explained by the ability of resorcinol to scavenge free radicals including iodine atoms without producing iodide ions.     

Complete structural characterization of metallacyclic complexes in solution-phase using simultaneously X-ray diffraction and molecular dynamics simulation

Wide-angle X-ray diffraction and molecular dynamics simulation has been used to perform complete structural characterization of nitromethane solution of a 16-membered gold(I) ring. The joint application of these two methods was an adequate tool to describe not only the structure of the complex but also the solvation properties of the complex in nitromethane and the effect of the solvation on the bulk structure. It has been found that a relatively diffuse slightly distorted solvation shell is formed around the complex, following the shape of the molecule. Nitromethane molecules in the solvation sphere are distributed randomly; no special orientation can be detected. The interaction energy of the complex with nitromethane molecules is attractive. In bulk, besides the antiparallel orientation of the nitromethane molecules, T-shape orientation and long-range order in antidipole orientation can also be detected.     

An ab initio study of 15N-11B spin-spin coupling constants for borazine and selected derivatives

Ab initio equation-of-motion coupled-cluster singles and doubles (EOM-CCSD) calculations have been performed to investigate substituent effects on coupling constants for borazine and selected substituted borazines. For molecules in which F atoms are not bonded to adjacent atoms in the ring, F substitution increases the one-bond (11)B-(15)N coupling constants involving the atom at which substitution occurs but leaves the remaining one-bond B-N coupling constants essentially unchanged. For these molecules, the magnitudes of one-bond B-N coupling constants are only slightly dependent on the number of F atoms present. Fluorine substitution at adjacent B and N atoms in the borazine ring further increases the one-bond B-N coupling constant involving the substituted atoms and has the same effect on the other one-bond coupling constants as observed for corresponding molecules in which substitution occurs at alternate sites. In contrast to the effect of F substitution, substitution of Li at either N or B decreases one-bond B-N coupling constants relative to borazine. The effects of F and Li substitution on one-bond B-N coupling constants for borazine are similar to F and Li substitution effects on (13)C-(13)C coupling constants for benzene.     

Determination of carbosulfan and its metabolites in oranges by liquid chromatography ion-trap triple-stage mass spectrometry

Liquid chromatography ion-trap mass spectrometry LC-MSn has been successfully applied to identify and confirm carbosulfan and seven of its metabolites in oranges after pressurized liquid extraction (PLE) with dichloromethane. Mass spectra of carbosulfan and its metabolites were investigated using multiple stages of mass spectrometry. Although interpretation of the fragmentation pathways, based on mass spectra, enables structural elucidation and identification of these compounds, the proposed fragmentation pathways and ion structures need verification by exact mass measurements. The analytical method--PLE and LC-MS3 --was validated: limits of quantification (LOQ) ranged from 0.01 to 0.07 mg kg(-1); at this level, recoveries were 55-90% with RSDs (five replicate analyses) from 8 to 19%. The degradation of carbosulfan was determined in a laboratory study carried out in mature oranges (Valencia Late) and tangerines (Clementine of Nules) already harvested. Main degradation products of carbosulfan were carbofuran, 3-hydroxycarbofuran, 3-ketocarbofuran and dibutylamine.