Molecular weight effect on latex film formation induced by solvent vapor: an optical transmission study

Vesicular electrokinetic chromatography was used to investigate solute partitioning from the aqueous phase into dihexadecyl hydrogen phosphate (DHP) vesicles. Retention factors of neutral solutes are related to their partition coefficients between the aqueous phase and vesicles (K(vw)). The K(vw) of the aromatic test solutes were readily obtained from the slopes of the linear relationships between retention factors versus DHP concentrations. The technique offers the advantages of speed, automation, and small sample size for determination of partition coefficients. The K(vw) values of 43 uncharged solutes were measured at below as well as above the phase transition temperatures. The logarithms of partition coefficients (log K(vw)) of solutes at 71 degrees C (above T(c)) were slightly higher than those at 36 degrees C (below T(c)). The solvation characteristics of DHP were also studied using linear solvation energy relationships at the two temperatures.     

Oxygen Diffusion into Multiwalled Carbon Nanotube Doped Polystrene Latex Films Using Fluorescence Technique

This study examines the oxygen diffusion into polystyrene (PS) latex/multiwalled carbon nanotube (MWNT) nanocomposite films (PS/MWNT) consisting of various amounts of MWNT via steady state fluorescence technique (SSF). PS/MWNT films were prepared from the mixture of MWNT and pyrene (P)-labeled PS latexes at various compositions at room temperature. These films were then annealed at 170 °C above glass transition (T_g) temperature of PS. Fluorescence quenching measurements were performed for each film separately to evaluate the effect of MWNT content on oxygen diffusion. The Stern-Volmer equation for fluorescence quenching is combined with Fick’s law for diffusion to derive the mathematical expressions. Diffusion coefficients (D) were produced and found to be increased from 1.1?×?10^?12 to 41?×?10^?12 cm²s^?1 with increasing MWNT content. This increase was explained via the existence of large amounts of pores in composite films which facilitate oxygen penetration into the structure.     

Application of epidemic models to phase transitions

The Susceptible-Infected-Recovered (SIR) and Susceptible-Exposed-Infected-Recovered (SEIR) models describe the spread of epidemics in a society. In the typical case, the ratio of the susceptible individuals fall from a value S ₀ close to 1 to a final value S_f , while the ratio of recovered individuals rise from 0 to R_f?=?1???S_f . The sharp passage from the level zero to the level R_f allows also the modeling of phase transitions by the number of “recovered” individuals R(t) of the SIR or SEIR model. In this article, we model the sol–gel transition for polyacrylamide–sodium alginate (SA) composite with different concentrations of SA as SIR and SEIR dynamical systems by solving the corresponding differential equations numerically and we show that the phase transitions of “classical” and “percolation” types are represented, respectively, by the SEIR and SIR models.     

Electrical and optical percolations in PMMA/GNP composite films

Effects of graphene nanoplatelet (GNP) addition on the electrical conductivity and optical absorbance of poly(methyl methacrylate)/graphene nanoplatelet (PMMA/GNP) composite films were studied. Optical absorbance and two point probe resistivity techniques were used to determine the variations of the optical and electrical properties of the composites, respectively. Absorbance intensity, A, and surface resistivity, R_s, of the composite films were monitored as a function of GNP mass fraction (M) at room temperature. Absorbance intensity values of the composites were increased and surface resistivity values were decreased by increasing the content of GNP in the composite. Electrical and optical percolation thresholds of composite films were determined as M_σ = 27.5 wt.% and M_op = 26.6 wt.%, respectively. The conductivity and the optical results were attributed to the classical and site percolation theories, respectively. Optical (β_op) and electrical (β_σ) critical exponents were calculated as 0.40 and 1.71, respectively.     

Cation Effect on Slow Release from Alginate Beads: A Fluorescence Study

In this study, spherical alginate beads containing pyranine (P _y ) as a fluorescence probe were prepared by ionotropic gelation of a sodium alginate solution. The steady state fluorescence technique was used to study pyranine release from the alginate beads crosslinked with calcium, barium and aluminum ions, respectively. The slow release of P _y was observed with the time drive mode of the spectrophotometer at 512 nm. Fluorescence emission intensity (I _p ) from P _y was monitored during the release process, and the encapsulation efficiency (EE) of pyranine from the alginate beads was calculated. The Fickian Diffusion model was used to measure the release coefficients, D _sl . It was seen that the slow release coefficients of pyranine from the alginate beads crosslinked with Ca²⁺, Ba²⁺, and Al³⁺ ions increased in the following order: D _sl (Al³⁺)> D _sl (Ca²⁺)> D _sl (Ba²⁺). In contrast, the initial amount of pyranine and EE into the beads showed the reverse behavior.     

Critical Exponents of Photoinitiated Gelation at Different Light Intensities

A photo-differential scanning calorimetric (Photo-DSC) technique was used to study the photoinitiated radical polymerization of a 75% epoxy diacrylate (EA) and 25% tripropyleneglycoldiacrylate (TPGDA) mixture with 2-mercaptothioxanthone (TX-SH) as photoinitiator by using different light intensities. Photopolymerization reactions were carried out under identical conditions of temperature and initiator concentration. It was observed that all conversion curves during gelation at various UV light intensities present good sigmoidal behavior as predicted by the percolation model. Observations around the critical time, called the glass transition point (t_g), taken for polymerization to reach the maximum rate (Rp _max) show that the gel fraction exponents β obeyed the universal percolation picture. On the other hand, Rp _max, t _g, and final conversion values were found to be dependent on the UV light intensity.     

Molecular Weight Effect on Latex Film Formation from Polystyrene Particles: A Photon Transmission Study

The photon transmission method was used to probe the time evolution of film formation from latex particles. Two different latex films were prepared from high molecular weight (HM) and low molecular weight (LM) polystyrene particles at room temperature and were annealed at various temperatures in 2.5-min time intervals above the glass transition. The increase in the transmitted photon intensity (Itr) is attributed to the increase in "crossing density" at the junction surface. The Prager-Tirrell model was employed to interpret the increase in crossing density at the junction surface. The back and forth activation energies were measured for HM and LM films and found to be around 59 and 87 kcal/mol for a reptating polymer chain across the junction surface. Monte Carlo simulations were performed for photon transmission through a rectangular lattice. The number of transmitted photons (Ntr) was calculated as a function of the mean free path of photons. It was observed that Ntr, similar to Itr, increases as the square of the mean free path of photons is increased. Copyright 1999 Academic Press.     

Electrical,optical and fluorescence percolations in P(VAc-co-BuA)/MWCNT composite films

Effects of multiwall carbon nanotube (MWCNT) addition on the electrical conductivities, optical transparencies and fluorescence emissions of poly(vinyl acetate-co-butyl acrylate) (P(VAc-co-BuA))/MWCNT composite films were studied. Optical transmission, fluorescence emission and two point probe resistivity techniques were used to determine the variations of the optical, fluorescence and electrical properties of the composites, respectively. Transmitted photon intensity (I _tr), fluorescence emission intensity (I _fl) and surface resistivity (ρ _s) of the composite films were monitored as a function of MWCNT mass fraction (M) at room temperature. All these measured quantities of the composites were decreased by increasing the content of MWCNT in the composite. The conductivity and the optical results were attributed to the classical and site percolation theories, respectively. The fluorescence results, however, possessed both the site and classical percolation theories at low and high MWCNT content regions, respectively.     

Effect of gamma Irradiation on Latex Film Dissolution

Latex films have been prepared by annealing pyrene (Py)-labeled poly(methyl methacrylate)-polyisobutylene particles at the glass transition temperature (100 degrees C). These films were then irradiated by gamma rays from (60)Co in a gamma cell at room temperature at various dose rates (rad/h). Before dissolution the films were annealed at 200 degrees C for a 30 min time interval to complete the film formation process. Steady-state fluorescence techniques were used to monitor the dissolution of irradiated latex films. Dissolution of films in a chloroform-heptane (80%-20%) mixture was monitored in real time by the Py fluorescence intensity change. Relaxation constants, k(0), and dissolution coefficients, D(d), of polymer chains were measured. Two different regimes of D(d) values were observed during dissolution, which are related to two different molecular weight distributions caused by scission and branching of polymer chains when they were irradiated and annealed. Copyright 2001 Academic Press.     

Triplet annihlation in pyrene-d10 doped fluorene

Triplet exciton concentration inferred from delayed fluorescence measurements of pyrene-d₁₀ doped fluorene crystals has been examined as a function of temperature in order to study the correlation between exciton density and electronic triplet spin lattice relaxation (T_ie). The results have indicated a poor correlation between the delayed fluorescence intensity and the electronic relaxation rate although a qualitative correlation exists between the growth of trap phosphorescence and relaxation rate.