Effects of pyrolysis temperatures on the textural,magnetic, morphology,and catalytic properties of supported nickel nanoparticles

The development of base metal catalysts for industrially important reactions continues to be an important goal of catalysis research. Herein, the effects of pyrolysis temperature on the textural, structural, surface, magnetics properties and catalytic properties of silica-supported nickel nanoparticles (NiNPs) were thoroughly investigated. Mono-dispersed NiNPs encapsulated in graphitic shells were first successfully obtained and were characterized using a variety of methods such as BET surface area measurement, CO-pulse chemisorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HR-TEM), and superconducting quantum interference device (SQUID) measurement. The findings showed that all catalysts’ properties were considerably altered with change in pyrolysis temperature. Hydrogenation of diphenylacetylene was then selected as the model reaction for the evaluation of the catalytic performance of the graphitic-shelled NiNPs. After testing, pyrolysis of a nickel at 800 °C (catalyst A) displayed tremendous activity and selectivity to produce >94% of stilbene with selectivities of 99% for the Z-isomer.     

Catalytic,Enantioselective α‐Alkylation of Azlactones with Nonconjugated Alkenes by Directed Nucleopalladation

A palladium(II)‐catalyzed enantioselective α‐alkylation of azlactones with nonconjugated alkenes is described. The reaction employs a chiral BINOL‐derived phosphoric acid as the source of stereoinduction, and a cleavable bidentate directing group appended to the alkene to control the regioselectivity and stabilize the nucleopalladated alkylpalladium(II) intermediate in the catalytic cycle. A wide range of azlactones were found to be compatible under the optimal reaction conditions to afford products bearing α,α‐disubstituted α‐amino‐acid derivatives with high yields and high enantioselectivity.     

New Cycloartane and Flavonol Glycosides from Corchorus depressus

Two new monodesmosidic cycloartane triterpene glycosides, depressosides E and F, and two new flavonol glycosides, depressonol A and B, were isolated from the butanol‐soluble part of the EtOH extract of Corchorus depressus L . The structures of the new compounds were elucidated as (22R,24S)‐22,25‐epoxy‐9,19‐cyclolanostane‐3β,16β,24‐triol 3‐[α‐L ‐rhamnopyranosyl‐(1→4)‐β‐D ‐glucopyranoside] ( 1 ), (22R,24S)‐22,25‐epoxy‐9,19‐cyclolanostane‐3β,16β,24‐triol 3‐[α‐D ‐glucopyranosyl‐(1→3)‐β‐D ‐glucopyranoside] ( 2 ), kaempferol 3‐[β‐D ‐glucopyranosyl‐(1→4)‐β‐D ‐galactopyranoside] 7‐[α‐L ‐arabinofuranoside] ( 4 ), and kaempferol 3‐[β‐D ‐glucopyranosyl‐(1→6)‐β‐D ‐galactopyranoside] 7‐[α‐L ‐arabinofuranoside] ( 5 ) on the basis of chemical evidence and detailed spectroscopic studies.     

Reexamination of CeCl3 and InCl3 as activators in the diastereoselective Mukaiyama aldol reaction in aqueous media

A search for suitable reaction conditions in Mukaiyama-type aldol condensations activated by CeCl(3) and InCl(3) revealed that the reaction proceeds best in i-PrOH/H(2)O (95:5). Contrary to literature precedent, no reaction was observed in pure water, and the encountered destruction of the starting silyl enol ether can be ascribed to initial hydrolysis of the Lewis acid. As anticipated from the dual parameter (pK(h), WERC value) characteristics of CeCl(3) and InCl(3), the former proved more efficient as Lewis acid-promoter, in terms of reaction speed and yield. Nevertheless, InCl(3) was a superior catalyst during evaluation of the diastereoselectivity of the process. In this regard, determination of diastereoselectivity as a function of time showed that the InCl(3)-catalyzed reaction is irreversible, whereas the CeCl(3)-catalyzed reaction is a reversible process. In both cases, formation of the syn product is kinetically preferred, although DeltaDeltaG(++)273K(InCl(3)) = 1.50 kcal/mol versus DeltaDeltaG(++)273K (CeCl(3)) = 0.38 kcal/mol. Molecular modeling (semiempirical PM3, ab initio HF/3-21G*, hybrid B3LYP/3-21G*, and B3LYP/LANL2DZ) of the diastereoselective aldol reaction promoted by InCl(3) supports a "closed", Zimmermann-Traxler transition state.     

Increased enantioselectivity in the addition of diethylzinc to benzaldehyde by the use of chiral ligands containing the alpha-phenylethylamino group in combination with achiral ligands

Chiral ligands (S,S)-1, (S,S)-2, (S,S)-3, (S)-4, (S)-5, (S,S)-6, (S,S)-7, and (S,S)-8 turned out to be effective promoters in the enantioselective addition of diethylzinc to benzaldehyde. Interestingly, diamine (S,S)-3 and amino alcohols (S)-5 and (S,S)-7 induce the preferential formation of carbinol (R)-10 (unlike stereoinduction) whereas amido analogues (S,S)-2, (S)-4, and (S,S)-6 favor (S)-10 (like stereoinduction). Molecular modeling at the semiempirical PM3 level provided a reasonable interpretation based on conformational effects in the corresponding transition structures. Combinations of chiral ligands 1-8 with an achiral, flexible ligand (9) gave rise to an activated catalytic system that resulted in faster and higher yielding reactions. Furthermore, substantial increases in the observed enantiomeric excesses of product 10 confirmed the relevant role of achiral bis(sulfonamide) 9 as activator and "chiral environment amplifier".     

Dewetting behavior of aqueous cationic surfactant solutions on liquid films

Previous experimental work has shown that the spreading of a drop of aqueous anionic surfactant solution on a liquid film supported by a negatively charged solid substrate may give rise to a fingering instability (Afsar-Siddiqui, A. B.; Luckham P, F.; Matar, O. K. Langmuir 2003, 19, 703-708). However, upon deposition of a cationic surfactant on a similarly charged support, the surfactant will adsorb onto the solid-liquid interface rendering it hydrophobic. Water is then expelled from the hydrophobic regions, causing film rupture and dewetting. In this paper, experimental results are presented showing how the surfactant concentration and film thickness affect the dewetting behavior of aqueous dodecyltrimethylammonium bromide solutions. At low surfactant concentrations and large film thicknesses, the film ruptures at a point from which dewetting proceeds. At higher concentrations and smaller film thicknesses, the ruptured region is annular in shape and fluid moves away from this region. At still higher concentrations and smaller film thicknesses, the deposited surfactant forms a cap at the point of deposition that neither spreads nor retracts. This variation in dewetting mode is explained by considering the relative Marangoni and bulk diffusion time scales as well as the mode of assembly of the surfactant adsorbed on the solid surface.     

Applications of supercritical fluid extraction (SFE) of palm oil and oil from natural sources

Supercritical fluid extraction (SFE), which has received much interest in its use and further development for industrial applications, is a method that offers some advantages over conventional methods, especially for the palm oil industry. SC-CO? refers to supercritical fluid extraction (SFE) that uses carbon dioxide (CO?) as a solvent which is a nontoxic, inexpensive, nonflammable, and nonpolluting supercritical fluid solvent for the extraction of natural products. Almost 100% oil can be extracted and it is regarded as safe, with organic solvent-free extracts having superior organoleptic profiles. The palm oil industry is one of the major industries in Malaysia that provides a major contribution to the national income. Malaysia is the second largest palm oil and palm kernel oil producer in the World. This paper reviews advances in applications of supercritical carbon dioxide (SC-CO?) extraction of oils from natural sources, in particular palm oil, minor constituents in palm oil, producing fractionated, refined, bleached, and deodorized palm oil, palm kernel oil and purified fatty acid fractions commendable for downstream uses as in toiletries and confectionaries.     

Studies on interactions of excited cadmium and mercury atoms with secondary and tertiary alkyl- and silylamines in gas phase

The Cd(³P₁)- and Hg(³P₁)-photosensitized emissions of some secondary and tertiary alkyl- and silylamines have been investigated under conditions of steady illumination at 493 and 298 K, respectively. The emission bands were observed at around 440 nm in the cadmium-photosensitized reactions of these amines. In contrast, no appreciable emission bands were observed in the mercury-photosensitized reactions of these amines. However, upon addition of tert-butyl alcohol to the amine-mercury system, an emission band evolved at around 350 nm in the mercury-photosensitization. The peak-wavelengths for secondary and tertiary alkyl- and silylamines are slightly shorter than the values predicted from the correlations between the peak wavelength and the first ionization energy obtained in the cadmium- and mercury-photosensitized luminescence of ammonia and primary amines. The quenching efficiencies of the cadmium and mercury resonance lines by secondary alkyl- and silylamines are higher than those by tertiary alkyl- and silylamines. These observations suggest that the steric hindrance by the alkyl and silyl groups to the approach of the nitrogen atom in the amines to excited cadmium and mercury atoms seems to be an important factor for the stabilization of the exciplexes and the quenching of the resonance lines. The behavior of silylamines is similar to that of alkylamines in cadmium- and mercury-photosensitized reactions.     

Water-wire catalysis in photoinduced acid-base reactions

The pronounced ability of water to form a hyperdense hydrogen (H)-bond network among itself is at the heart of its exceptional properties. Due to the unique H-bonding capability and amphoteric nature, water is not only a passive medium, but also behaves as an active participant in many chemical and biological reactions. Here, we reveal the catalytic role of a short water wire, composed of two (or three) water molecules, in model aqueous acid-base reactions synthesizing 7-hydroxyquinoline derivatives. Utilizing femtosecond-resolved fluorescence spectroscopy, we tracked the trajectories of excited-state proton transfer and discovered that proton hopping along the water wire accomplishes the reaction more efficiently compared to the transfer occurring with bulk water clusters. Our finding suggests that the directionality of the proton movements along the charge-gradient H-bond network may be a key element for long-distance proton translocation in biological systems, as the H-bond networks wiring acidic and basic sites distal to each other can provide a shortcut for a proton in searching a global minimum on a complex energy landscape to its destination.