The solubilization of alcohols in micellar solutions

The specific conductivities of dodecyldimethylbenzylammonium bromide (C12BBr) have been determined in aqueous butanol and aqueous benzyl alcohol solutions in the temperature range of 5-40°C. From these data the temperature dependent critical micelle concentration (cmc) was determined. The molar fraction of alcohol in the micelle was estimated using the theory suggested by Motomura et al. for surfactant binary mixtures. The thermal properties such as standard Gibbs free energy, enthalpy and entropy of solubilization of alcohols in the micelles were estimated for the phase separation model. The change in heat capacity upon solubilization of alcohol in the micelle has been estimated form the above properties. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determination of lead in natural waters using flow injection with on-line preconcentration and flame AAS detection

A rapid and sensitive method has been developed for the determination of lead in water samples by flame atomic absorption spectrometry using on-line preconcentration on a microcolumn packed with silica gel treated with a mixture of Aliquat 336 and nitroso-R-salt. The lead is retained at pH 5.5. The preconcentrated lead is directly eluted from the column to the nebulizer-burner system using 150 L of 0.1 mol/L hydrochloric acid. The optimum preconcentration conditions are given and the retention efficiency achieved is higher than 80%. The enrichment factor is 37 and 100 for sample volumes of 5 and 30 mL, respectively. The limits of detection are 10.0, 6.0 and 4.0 ng/mL when 5, 10 and 30 mL of water is preconcentrated.     

Direct capillary electrophoretic determination of three chemotherapeutic drugs in human urine

Summary Capillary zone electrophoresis (CZE) has been used for direct determination of 6-thioguanine, methotrexate, and 5-fluorouracil in human urine, by use of a fused-silica capillary (60.2 cm×75 μm i.d.). Separation was performed after hydrodynamic injection for 7 s; the separation potential and capillary temperature were 25 kV and 35°C, respectively. A 45mm borate buffer solution (pH 9.2) was used as separation electrolyte. Under these conditions the analysis takes approximately 10 min and interday precision of migration times and corrected peak areas is satisfactory. A linear response over the concentration range 3.0–20.0 mg L¹ was observed for the three chemotherapeutic drugs in diluted human urine. Detection limits (s/n=3) for 6-thioguanine and methotrexate were approximately 1.60 mg L¹ in diluted human urine; that for fluorouracil was 2.60 mg L¹. A 2-ml volume of human urine was diluted with 2-mL of water and introduced directly into the electrophoresis system. CZE was shown to be a good method with regard to simplicity, satisfactory precision, and sensitivity. This method resulted in especially excellent recoveries for determination of methotrexate in all the different urine samples analysed (n=10).     

Evaluation of surface- and ground-water pollution due to herbicides in agricultural areas of Zamora and Salamanca (Spain)

The pollution of agricultural land due to herbicides was assessed in the Guare?a and Almar river basins, situated in the provinces of Zamora and Salamanca (Spain). A set of fifteen herbicides, including triazines, ureas, amides and others, was selected owing to their frequency of use, the amounts used, their toxicity and their persistence in the environment. Solid-phase extraction with polymeric cartridges, followed by HPLC with diode-array detection, were used to monitor the herbicides. This technique was chosen owing to the wide range of functionality and polarity of the analytes under study. The detection limits obtained were in the 0.004-0.025 microg/l range (lambda=220 nm). Surface and ground waters, taken from different locations in the basins, were analyzed over a 6-month period. The presence of six out of the fifteen herbicides monitored--chlortoluron, atrazine, terbutryn, alachlor, diflufenican and fluazifop-butyl--was detected in several samples at levels ranging from the detection limit to 1.2 microg/l. The relationship of these herbicides to the agricultural activities of the zone is discussed.     

Preparation of new monoanionic "scorpionate" ligands: synthesis and structural characterization of titanium(IV) complexes bearing this class of ligand

The preparation of new "scorpionate" ligands in the form of the lithium derivatives [(Li(bdmpzdta)(H(2)O))(4)] (1) [bdmpzdta = bis(3,5-dimethylpyrazol-1-yl)dithioacetate], [Li(bdphpza)(H(2)O)(THF)] (2) [bdphpza = bis(3,5-diphenylpyrazol-1-yl)acetate], and [Li(bdphpzdta)(H(2)O)(THF)] (3) [bdphpzdta = bis(3,5-diphenylpyrazol-1-yl)dithioacetate] has been carried out. Furthermore, a series of titanium complexes has been prepared by reaction of TiCl(4)(THF)(2) with the lithium reagents [(Li(bdmpza)(H(2)O))(4)] (4) [bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate] and 1. Under the appropriate experimental conditions neutral complexes, namely [TiCl(3)(kappa(3)-bdmpza)] (5), [TiCl(3)(kappa(3)-bdmpzdta)] (6), and [TiCl(2)(kappa(2)-bdmpzdta)(2)] (7), and cationic complexes, namely [TiCl(2)(THF)(kappa(3)-bdmpza)]Cl (8) and [TiCl(2)(THF)(kappa(3)-bdmpzdta)]Cl (9), were isolated. Complexes 8 and 9 undergo an interesting nucleophilic THF ring-opening reaction to give the corresponding alkoxide-containing species [TiCl(2)(kappa(3)-bdmpza)(O(CH(2))(4)Cl)] (10) and [TiCl(2)(kappa(3)-bdmpzdta)(O(CH(2))(4)Cl)] (11). A family of alkoxide-containing complexes of general formulas [TiCl(2)(kappa(3)-bdmpza)(OR)] [R = Me (12); R = Et (14); R = (i)Pr (16); R = (t)Bu (18)] and [TiCl(2)(kappa(3)-bdmpzdta)(OR)] [R = Me (13); R = Et (15); R = (i)Pr (17)] was also prepared. The structures of these complexes have been determined by spectroscopic methods, and in addition, the X-ray crystal structures of 3, 7, 10, and 11 were also established.     

Analytical approaches to expanding the use of capillary electrophoresis in routine food analysis

Capillary Electrophoresis (CE) is becoming an ever more powerful analytical technique for the separation, identification, and quantification of a wide variety of compounds of interest in many application fields. Particularly in food analysis this technique can offer interesting advantages over chromatographic techniques because of its greater simplicity and efficiency. Nevertheless, CE needs to advance with regard to compatibility with sample matrices, sensitivity, and robustness of the methodologies in order to gain even wider acceptance in food analysis laboratories, specially for routine work. This article presents various approaches to expanding the analytical usefulness of CE in food analysis, discussing their advantages over conventional CE. These approaches focus on sample screening, automated sample preparation with on-line CE arrangements, and the automatic integration of calibration in routine analytical work with CE.     

Transformation of dynamic DSC results into isothermal data for the curing kinetics study of the resol resins

Kinetics of thermosetting polymers curing is difficult to study by isothermal methods based on the differential scanning calorimetry (DSC) technique. The difficulty is due to the low sensitivity of the equipment for total reaction heat measurements during high temperature process. The aim of this paper is to display the equivalence between a dynamic model, the Ozawa method, and an isothermal isoconversional fit, which allows predicting the isothermal behavior of the resol resins cure through dynamic runs by DSC. In this work, lignin–phenol–formaldehyde and commercial phenol–formaldehyde resol resins were employed. In addition, the isothermal kinetic parameters for both resins were performed by means of transformation of the data obtained from the dynamic Ozawa method.     

Optimization of the Microwave-Assisted Saponification and Extraction of Organic Pollutants from Marine Biota Using Experimental Design and Artificial Neural Networks

Several improvements in sample pretreatment for the determination of organic pollutants (i.e. n-alkanes, polycyclic aromatic hydrocarbons, PAHs) in marine biota (mussels) are presented. The use of liquid nitrogen and homogenization of the samples are shown to be an alternative to the time consuming liophilization step required for the analysis of biota samples. Microwave-assisted hydrolysis and extraction are combined to isolate organic pollutants (19 n-alkanes and 27 PAHs) from biota matrices. Experimental design (ED) and artificial neural networks (ANNs) were used to optimize the experimental conditions. NIST-CRM 2978 was used to test the validity of the developed method which shows a good agreement with certified values.     

Beta-elimination reactions by using samarium diiodide

The development of methodologies for the formation of carbon-carbon double bonds could be considered one of the most important challenges in organic synthesis. To this end, beta-elimination reactions in 1,2-difunctionalised substrates have been one of the most important means of generating C=C bonds.This review is intended to highlight the use of SmI2 in beta-elimination procedures, such that the organization of this revision highlights conventional beta-elimination processes which are promoted by samarium diiodide. The synthetic applications of SmI2 will be covered, and 1,2-elimination reactions which are involved in sequential reactions promoted by samarium diiodide, will also be illustrated. These methodologies along with the more recent developments in the area are discussed in this tutorial review.     

Micellar electrokinetic capillary chromatography for the determination of Viagra and its metabolite (UK-103,320) in human serum

Micellar electrokinetic capillary chromatography (MEKC) was investigated for the determination of Viagra (sildenafil citrate, SC) and its metabolite (UK-103,320) in human serum in a concentration range of clinical interest. For MEKC, human serum samples spiked with SC and UK were obtained directly after elution with methanol from a tC18 cartridge. The extract was evaporated and regenerated in a solution 1 mM of phosphate buffer (pH 12.3) which contained a methanol percentage of 20% that was analyzed using phosphate buffer (pH 12.3, 10 mM) containing 30 mM sodium dodecyl sulfate (SDS) as separation electrolyte and a fused-silica capillary. This method gave satisfactory interday precision with respect to migration times relative standard deviation (RSD < 1%) and linear responses for the concentration ranges investigated (0.50-3.50 mg L(-1) for the compound SC and 0.90-4.60 mg L(-1) for UK). An intraday RSD (n = 5 graphs) between the slopes of the calibration graphs was acceptable (6.40%) for SC and (3.37%) for UK. A satisfactory interday precision between slopes was also obtained (RSD 4.10% for SC and a RSD 2.72% for UK) which demonstrated the ruggedness of this method. Detection limits (S/N = 3) were about 200 ng/mL for both compounds in human serum. MEKC was shown as a good method with regards to simplicity, precision and sensitivity.