Elemental distribution and thermoelectric properties of layered tellurides 39R-M(0.067)Sb(0.667)Te(0.266) (M=Ge, Sn)

The isostructural phases 39R‐Ge_0.067Sb_0.667Te_0.266 (R$\bar 3The isostructural phases 39R-Ge(0.067)Sb(0.667)Te(0.266) (R3m, a=4.2649(1), c=75.061(2) ?) and 39R-Sn(0.067)Sb(0.667)Te(0.266) (R3m, a=4.2959(1), c=75.392(2) ?) were prepared by quenching stoichiometric melts of the pure elements and subsequent annealing at moderate temperatures. Their structures are comparable to "superlattices" synthesized by layer-by-layer deposition onto a substrate. These structures show no stacking disorder by electron microscopy. The structure of the metastable layered phases are similar to that of 39R-Sb(10)Te(3) (equivalent to Sb(0.769)Te(0.231)), which contains four A7 gray-arsenic-type layers of antimony alternating with Sb(2)Te(3) slabs. Joint refinements on single-crystal diffraction data using synchrotron radiation at several K edges were performed to enhance the scattering contrast. These refinements show that the elemental distributions at some atom positions are disordered whereas otherwise the structures are long-range ordered. The variation of the elemental concentration correlates with the variation in interatomic distance. Z-contrast scanning transmission electron microscopy (HAADF-STEM) on 39R-Ge(0.067)Sb(0.667)Te(0.266) confirms the presence of concentration gradients. The carrier-type of the isostructural metal (A7-type lamellae)-semiconductor heterostructures (Ge/Sn-doped Sb(2)Te(3) slabs) varies from n-type (Ge(0.067)Sb(0.667)Te(0.266)) to p-type (Sn(0.067)Sb(0.667)Te(0.266)). Although the absolute values of the Seebeck coefficient reached about 50-70 μV/K and the electrical conductivity is relatively high, the two isotypic phases exhibit a maximal thermoelectric figure of merit (ZT) of 0.06 at 400 °C as their thermal conductivity (κ≈8-9.5 W/mK at 400 °C) lies interestingly in between that of antimony and pure Sb(2)Te(3).     

Pre-organization of the core structure of E-selectin antagonists

A new class of N-acetyl-D-glucosamine (GlcNAc) mimics for E-selectin antagonists was designed and synthesized. The mimic consists of a cyclohexane ring substituted with alkyl substituents adjacent to the linking position of the fucose moiety. Incorporation into E-selectin antagonists led to the test compounds 8 and the 2'-benzoylated analogues 21, which exhibit affinities in the low micromolar range. By using saturation transfer difference (STD)-NMR it could be shown that the increase in affinity does not result from an additional hydrophobic contact of the alkyl substituent with the target protein E-selectin, but rather from a steric effect stabilizing the antagonist in its bioactive conformation. The loss of affinity found for antagonists 10 and 35 containing a methyl substituent in a remote position (and therefore unable to support to the stabilization of the core) further supports this hypothesis. Finally, when a GlcNAc mimetic containing two methyl substituents (52 and 53) was used, in which one methyl was positioned adjacent to the fucose linking position and the other was in a remote position, the affinity was regained.     

NiCl(2)(dppe)-catalyzed cross-coupling of aryl mesylates, arenesulfonates, and halides with arylboronic acids

An investigation of the NiCl(2)(dppe)-, NiCl(2)(dppb)-, NiCl(2)(dppf)-, NiCl(2)(PCy(3))(2)-, and NiCl(2)(PPh(3))(2)-catalyzed cross-coupling of the previously unreported aryl mesylates, and of aryl arenesulfonates, chlorides, bromides, and iodides containing electron-withdrawing and electron-donating substituents with aryl boronic acids, in the absence of a reducing agent, is reported. NiCl(2)(dppe) was the only catalyst that exhibited high and solvent-independent activity in the two solvents investigated, toluene and dioxane. NiCl(2)(dppe) with an excess of dppe, NiCl(2)(dppe)/dppe, was reactive in the cross-coupling of electron-poor aryl mesylates, tosylates, chlorides, bromides, and iodides. This catalyst was also efficient in the cross-coupling of aryl bromides and iodides containing electron-donating substituents. Most surprisingly, the replacement of the excess dppe from NiCl(2)(dppe)/dppe with excess PPh(3) generated NiCl(2)(dppe)/PPh(3), which was found to be reactive for the cross-coupling of both electron-rich and electron-poor aryl mesylates and chlorides. Therefore, the solvent-independent reactivity of NiCl(2)(dppe) provides an inexpensive and general nickel catalyst for the cross-coupling of aryl mesylates, tosylates, chlorides, bromides, and iodides with aryl boronic acids.     

Hole tunneling and hopping in a Ru(bpy)3(2+)-phenothiazine dyad with a bridge derived from oligo-p-phenylene

A molecular dyad was synthesized in which a Ru(bpy)(3)(2+) (bpy = 2,2'-bipyridine) photosensitizer and a phenothiazine redox partner are bridged by a sequence of tetramethoxybenzene, p-dimethoxybenzene, and p-xylene units. Hole transfer from the oxidized metal complex to the phenothiazine was triggered using a flash-quench technique and investigated by transient absorption spectroscopy. Optical spectroscopic and electrochemical experiments performed on a suitable reference molecule in addition to the above-mentioned dyad lead to the conclusion that hole transfer from Ru(bpy)(3)(3+) to phenothiazine proceeds through a sequence of hopping and tunneling steps: Initial hole hopping from Ru(bpy)(3)(3+) to the easily oxidizable tetramethoxybenzene unit is followed by tunneling through the barrier imposed by the p-dimethoxybenzene and p-xylene spacers. The overall charge transfer proceeds with a time constant of 41 ns, which compares favorably to a time constant of 1835 ns associated with equidistant hole tunneling between the same donor-acceptor couple bridged by three identical p-xylene units. The combined hopping/tunneling sequence thus leads to an acceleration of hole transfer by roughly a factor of 50 when compared to a pure tunneling mechanism.     

Aldehyde cruciforms: dosimeters for primary and secondary amines

We demonstrate that aldehyde-substituted donor-acceptor cruciforms [1,4-bis(arylethynyl)-2,5-distyrylbenzenes] are useful dosimeters for primary amines, primary diamines, and secondary amines. The 1,n-diamines are particularly reactive towards this dosimeter and can be detected in less than 100 ppm concentration. Using a single aldehyde-functionalized cruciform in seven different solvents allowed us to discern fourteen different amines by digital photography and statistical evaluation of the response patterns extracted as red, green, blue (RGB) values.     

Biomimetic membrane arrays on cast hydrogel supports

Lipid bilayers are intrinsically fragile and require mechanical support in technical applications based on biomimetic membranes. Tethering the lipid bilayer membranes to solid substrates, either directly through covalent or ionic substrate-lipid links or indirectly on substrate-supported cushions, provides mechanical support but at the cost of small molecule transport through the membrane-support sandwich. To stabilize biomimetic membranes while allowing transport through a membrane-support sandwich, we have investigated the feasibility of using an ethylene tetrafluoroethylene (ETFE)/hydrogel sandwich as the support. The sandwich is realized as a perforated surface-treated ETFE film onto which a hydrogel composite support structure is cast. We report a simple method to prepare arrays of lipid bilayer membranes with low intrinsic electrical conductance on the highly permeable, self-supporting ETFE/hydrogel sandwiches. We demonstrate how the ETFE/hydrogel sandwich support promotes rapid self-thinning of lipid bilayers suitable for hosting membrane-spanning proteins.     

Compact poly(ethylene oxide) structures adsorbed at the ethylammonium nitrate-silica interface

The adsorption of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) onto silica from ethylammonium nitrate (a protic ionic liquid) has been investigated using colloid probe AFM force curve measurements. Steric repulsive forces were measured for PEO, confirming that PEO can compete with the ethylammonium cation and adsorb onto silica. The range of the repulsion increases with polymer molecular weight (e.g., from 1.4 nm for 0.01 wt % 10 kDa PEO to 40 nm for 0.01 wt % 300 kDa PEO) and with concentration (e.g., from 16 nm at 0.001 wt % to 78 nm at 0.4 wt % for 300 kDa PEO). Fits to the force curve data could not be obtained using standard models for a polymer brush, but excellent fits were obtained using the mushroom model, suggesting the adsorbed polymer films are compressed and relatively poorly solvated. No evidence for adsorption of 3.5 kDa PPO could be detected up to its solubility limit.     

Scorpio-Ligand: Synthesis of Biphenyl-Dihydroazepine Phosphoramidite Ligands for Asymmetric Hydrogenation

A novel dihydroazepine-bridged BIPHEP phosphoramidite ligand with an amino acid moiety in the backbone was synthesized and evaluated in the Rh-catalyzed asymmetric hydrogenation. The scorpion tail-like amino acid backbone is capable of hydrogen bond formation and able to shift the rotamer composition of the biphenyl axis with the two scissor-like arms. Pivaloyl-l -valine was studied as chiral selector unit and compared with pivaloylglycine as the achiral reference substance. The enantiomerization barrier of the pivaloylglycine-modified biphenylamide was determined to be ΔG^≠=110 kJ/mol. In the case of pivaloyl-l -valine, the (S_ax) isomer is thermodynamically favored. Due to the relatively high barrier, the ligand is atropisomeric at room temperature and allows the preparative separation of the stereoisomers. The obtained phosphoramidite ligands were separated by chiral HPLC. For the first eluting rotamer, Rh complex ([Rh(cod)(L)₂]BF₄) was generated in situ and examined in the enantioselective hydrogenation of 2-acetamidoacrylate and methyl 2-acetamido-3-phenylacrylate, achieving enantiomeric excesses of up to 94 %.     

Combinatorial organic materials research (COMR): design,synthesis and screening of a 225-membered materials library of liquid crystalline fluorinated p-quaterphenyls

The rapid solution phase synthesis of novel liquid crystalline materials is demonstrated by utilising combinatorial and parallel methods for the preparation of a library of 225 differently fluorinated 4,4"-dipropyl-p-quaterphenyls. Chemical diversity was introduced into the growing oligomers via a convergent synthetic sequence of iodinations and Suzuki cross-couplings by using various fluorinated phenyl building blocks. A highly efficient rapid parallel purification method was developed that provided HPLC-pure library members in amounts sufficient for the characterization of bulk properties.