Automated and rapid online determination of 15N abundance and concentration of ammonium, nitrite, or nitrate in aqueous samples by the SPINMAS technique

On the basis of the principle of reaction continuous-flow quadrupole mass spectrometry, an automated sample preparation unit for inorganic nitrogen (SPIN) species was developed and coupled to a quadrupole Mass Spectrometer (MAS). The SPINMAS technique was designed for an automated, sensitive, and rapid determination of 15N abundance and concentration of a wide variety of N-species involved in nitrogen cycling (e.g. NH4+, NO3-, NH2OH etc.). In this paper, the SPINMAS technique is evaluated with regard to the determination of 15N abundance and concentration of the most fundamental inorganic nitrogen compounds in ecosystems such as NH4+, NO2-, and NO3-. The presented paper describes the newly developed system in detail and demonstrates the general applicability of the system. For a precise determination of 15N abundance and concentration, a minimum total N-amount of 10 microg NH4+ - N, 0.03 microg NO2- - N, or 0.3 microg NO3- - N has to be supplied. Currently, the SPINMAS technique represents the most rapid and only fully automated all-round method for a simultaneous determination of 15N abundance and total N-amount of NH4+, NO2-, or NO3- in aqueous samples.     

Excellent passivation of thin silicon wafers by HF‐free hydrogen plasma etching using an industrial ICPECVD tool

In this work, hydrogen plasma etching of surface oxides was successfully accomplished on thin (～100 µm) planar n‐type Czochralski silicon wafers prior to intrinsic hydrogenated amorphous silicon [a‐Si:H(i)] deposition for heterojunction solar cells, using an industrial inductively coupled plasma‐enhanced chemical vapour deposition (ICPECVD) platform. The plasma etching process is intended as a dry alternative to the conventional wet‐chemical hydrofluoric acid (HF) dip for solar cell processing. After symmetrical deposition of an a‐Si:H(i) passivation layer, high effective carrier lifetimes of up to 3.7 ms are obtained, which are equivalent to effective surface recombination velocities of 1.3 cm s^–1 and an implied open‐circuit voltage (V_oc) of 741 mV. The passivation quality is excellent and comparable to other high quality a‐Si:H(i) passivation. High‐resolution transmission electron microscopy shows evidence of plasma‐silicon interactions and a sub‐nanometre interfacial layer. Using electron energy‐loss spectroscopy, this layer is further investigated and confirmed to be hydrogenated suboxide layers. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Near-Enantiopure Trimerization of 9-Ethynylphenanthrene on a Chiral Metal Surface

Enantioselectivity in heterogeneous catalysis strongly depends on the chirality transfer between catalyst surface and all reactants, intermediates, and the product along the reaction pathway. Herein we report the first enantioselective on-surface synthesis of molecular structures from an initial racemic mixture and without the need of enantiopure modifier molecules. The reaction consists of a trimerization via an unidentified bonding motif of prochiral 9-ethynylphenanthrene (9-EP) upon annealing to 500 K on the chiral Pd₃-terminated PdGa{111} surfaces into essentially enantiopure, homochiral 9-EP propellers. The observed behavior strongly contrasts the reaction of 9-EP on the chiral Pd₁-terminated PdGa{111} surfaces, where 9-EP monomers that are in nearly enantiopure configuration, dimerize without enantiomeric excess. Our findings demonstrate strong chiral recognition and a significant ensemble effect in the PdGa system, hence highlighting the huge potential of chiral intermetallic compounds for enantioselective synthesis and underlining the importance to control the catalytically active sites at the atomic level.     

Tin-rich Phases RE2Au3Sn6 with RE = La,Ce, Pr,Nd, Sm – Synthesis,Structure, Magnetic Properties,and 119Sn Mössbauer Spectra

The stannides RE₂Au₃Sn₆ (RE = La, Ce, Pr, Nd, Sm) were synthesized from the elements by arc-melting. Small single crystals were grown by annealing samples in sealed tantalum tubes in an induction furnace with a special annealing sequence. The polycrystalline phases were characterized through their X-ray powder diffraction pattern. The structures of Ce₂Au₃Sn₆, Pr₂Au₃Sn₆, and Nd₂Au₃Sn₆ were refined from single-crystal X-ray diffractometer data. The RE₂Au₃Sn₆ stannides crystallize with the orthorhombic La₂Zn₃Ge₆ type, space group Cmcm. The basic structural building units are Au1@Sn₄ tetrahedra and Au2@Sn₅ square pyramids. These units are condensed to layers and the structure can be described by a simple stacking of tetrahedral and pyramidal layers with the rare earth cations in between. Temperature dependent susceptibility studies indicate that all rare earth atoms are in the trivalent oxidation state, as their effective magnetic moments match the expected values of the free RE³⁺ ions. Pr₂Au₃Sn₆ and Nd₂Au₃Sn₆ exhibit antiferromagnetic ordering at T_N = 6.3(1) and 6.7(1) K. Investigations of the electrical resistivity of La₂Au₃Sn₆ and Ce₂Au₃Sn₆ confirmed that these compounds are metallic, for La₂Au₃Sn₆ a lower resistivity was observed, in line with the absence of screening unpaired electrons. ¹¹⁹Sn Mössbauer spectra for La₂Au₃Sn₆, Ce₂Au₃Sn₆, Pr₂Au₃Sn₆ and Nd₂Au₃Sn₆ show a complex superposition of three sub-spectra which can be differentiated through their distinctly different quadrupole splitting parameters. The isomer shifts (1.87 to 2.22 mm · s^–1) indicate significant s electron density at the tin nuclei.     

Organophotocatalytic N-Demethylation of Oxycodone Using Molecular Oxygen

N-Demethylation of oxycodone is one of the key steps in the synthesis of important opioid antagonists like naloxone or analgesics like nalbuphine. The reaction is typically carried out using stoichiometric amounts of toxic and corrosive reagents. Herein, we present a green and scalable organophotocatalytic procedure that accomplishes the N-demethylation step using molecular oxygen as the terminal oxidant and an organic dye (rose bengal) as an effective photocatalyst. Optimization of the reaction conditions under continuous flow conditions using visible-light irradiation led to an efficient, reliable, and scalable process, producing noroxycodone hydrochloride in high isolated yield and purity after a simple workup.     

VEGA: visual comparison of phylogenetic trees for evolutionary genome analysis (ChinaVis 2019)

In the field of evolutionary genome analysis, biologists seek to identify important genes or chromosome regions by comparing phylogenetic trees and analyzing the mutation at which locus might affect phenotypic traits. Unfortunately, the tree comparison and accompanying analysis are often performed manually. In this paper, we characterize the workflow of evolutionary genome analysis and present a task analysis for the fundamental questions asked by biologists during the analysis procedure. We propose two algorithms to enable quantitative tree comparison. One is to measure the differences between corresponding leaf nodes on two trees, and the other is to compute the classification inconsistency of each leaf node by comparing tree structure with a given biological classification. Configuring with the obtained difference and inconsistency, we present a visual analysis system, visual comparison of phylogenetic trees for evolutionary genome analysis, which not only enables biologists to intuitively explore trees but also identify locus which affects their traits by comparing SNP variants of selected leaf nodes. We conclude with case studies from two biologists who used our system to augment their previous manual analysis workflow and demonstrate that our system can reveal more insight.     

Probing molecular free energy landscapes by periodic loading

Single molecule pulling experiments provide information about interactions in biomolecules that cannot be obtained by any other method. However, the reconstruction of the molecule's free energy profile from the experimental data is still a challenge, in particular, for the unstable barrier regions. We propose a new method for obtaining the full profile by introducing a periodic ramp and using Jarzynski's relation for obtaining equilibrium quantities from nonequilibrium data. Our simulated experiments show that this method delivers significant more accurate data than previous methods, under the constraint of equal experimental effort.     

Iron Precursor Decomposition in the Magnesium Combustion Flame: A New Approach for the Synthesis of Particulate Metal Oxide Nanocomposites

Powders of Fe–Mg–O nanocomposite particles have been grown using a novel chemical vapor synthesis approach that employs the decomposition of a metalorganic precursor inside the metal combustion flame. After annealing in controlled gas atmospheres composition distribution functions, structure and phase stability of the obtained magnesiowüstite nanoparticles are measured with a combination of techniques such as inductively coupled plasma‐optical emission spectroscopy, energy dispersive X‐ray spectroscopy, X‐ray diffraction, and scanning and transmission electron microscopy. Complementary Mössbauer spectroscopy measurements reveal that depending on Fe loading and temperature of annealing either metastable and superparamagnetic solid solutions of Fe³⁺ ions in periclase (MgO) or phase separated mixtures of MgO and ferrimagnetic magnesioferrite (MgFe₂O₄) nanoparticles can be obtained. The described combustion technique represents a novel concept for the production of mixed metal oxide nanoparticles. Adressing the impact of selected annealing protocols, this study underlines the great potential of vapor phase grown non‐equilibrium solids, where thermal processing provides means to trigger phase separation and, concomitantly, the emergence of new magnetic properties.     

Tunnel magnetoresistance in alumina, magnesia and composite tunnel barrier magnetic tunnel junctions

Using magnetron sputtering, we have prepared Co-Fe-B/tunnel barrier/Co-Fe-B magnetic tunnel junctions with tunnel barriers consisting of alumina, magnesia, and magnesia-alumina bilayer systems. The highest tunnel magnetoresistance ratios we found were 73% for alumina and 323% for magnesia-based tunnel junctions. Additionally, tunnel junctions with a unified layer stack were prepared for the three different barriers. In these systems, the tunnel magnetoresistance ratios at optimum annealing temperatures were found to be 65% for alumina, 173% for magnesia, and 78% for the composite tunnel barriers. The similar tunnel magnetoresistance ratios of the tunnel junctions containing alumina provide evidence that coherent tunneling is suppressed by the alumina layer in the composite tunnel barrier.     

Spiral growth and step edge barriers

The growth of spiral mounds containing a screw dislocation is compared to the growth of wedding cakes by two-dimensional nucleation. Using phase field simulations and homoepitaxial growth experiments on the Pt(111) surface we show that both structures attain the same large scale shape when a significant step-edge barrier suppresses interlayer transport. The higher vertical growth rate of the spiral mounds on Pt(111) reflects the different incorporation mechanisms for atoms in the top region and can be formally represented by an enhanced apparent step-edge barrier.