Investigation of sulfur release in ETV-ICP-AES and its application for the determination of sulfates

Electrothermal vaporization inductively coupled plasma atomic emission spectrometry was applied to the determination of sulfur species in aqueous solutions. The sensitivity for sulfur as sulfate was found to be depending on the cations in the sample. For understanding this phenomenon the thermal behavior of sulfuric acid, ammonium sulfate and the sulfates of sodium, zinc, magnesium and silver was studied. There were significant differences in the thermal release of sulfur from these sulfates. To explain these phenomena different reaction mechanisms were calculated using thermodynamic data. Pd(NO₃)₂ and Ge in KOH were successfully applied as modifiers for the stabilization of the sulfates during the thermal pre-treatment step and to establish a uniform thermal behavior of different sulfates. The stabilization of sulfur using Ge and Pd as modifiers is based on the reduction of the sulfates in presence of carbon, resulting in the formation of GeS and PdS, respectively. This explanation has been supported by comparing the experimental results with thermodynamic calculations considering different reactions for the thermal decomposition of the sulfates. Applying Ge (in KOH) as modifier the absolute detection limit was 300 pg sulfur (e.g. LOD 30 ng mL^–1). The significant influence of phosphates on the determination of sulfur could be essentially reduced by Pd as modifier. Received: 11 November 1997 / Revised: 14 January 1998 / Accepted: 18 January 1998     

Establishment of traceability of ammonium nitrogen determination in wastewater

A case study is presented for the establishment of traceability for ammonium nitrogen determination in wastewater in a routine laboratory in order to fulfil the requirements of ISO/IEC standard 17025. The necessary relevant information was obtained from the method validation data, the quality control data and equipment calibration certificates. The method of measurement is described together with the measurement equation, selected traceable reference standards and the associated measurement uncertainty. The major sources of uncertainty of the result of measurement were identified and the combined uncertainty was calculated. Identification of the main uncertainty sources represents the basis for target operations for reducing the measurement uncertainty of this determination.     

Photochemical reactions of metal carbonyls [M(CO)6 (M = Cr,Mo and W), Re(CO)5Br,Mn(CO)3Cp] with 2-hydroxyacetophenone methanesulfonylhydrazone (apmsh)

Five new complexes, [M(CO)₅(apmsh)] [M = Cr; (1), Mo; (2), W; (3)], [Re(CO)₄Br(apmsh)] (4) and [Mn(CO)₃(apmsh)] (5) have been synthesized by the photochemical reaction of metal carbonyls [M(CO)₆] (M = Cr, Mo and W), [Re(CO)₅Br], and [Mn(CO)₃Cp] with 2-hydroxyacetophenone methanesulfonylhydrazone (apmsh). The complexes have been characterized by elemental analysis, mass spectrometry, f.t.-i.r. and ¹H spectroscopy. Spectroscopic studies show that apmsh behaves as a monodentate ligand coordinating via the imine N donor atom in [M(CO)₅(apmsh)] (1–4) and as a tridentate ligand in (5).     

Determination of traces of bismuth by quenching of solid-substrate room-temperature phosphorescence from morin-labeled silicon dioxide nano-particles

Silicon dioxide nano-particles, diameter 50 nm, containing morin (morin–SiO₂) have been synthesized by the sol–gel method. They emit strong and stable room-temperature phosphorescence (SS-RTP) on filter paper as substrate, and bismuth can quench the intensity of the SS-RTP. On this basis a new morin–SiO₂ solid-substrate room-temperature phosphorescence-quenching method has been established for determination of traces of bismuth. Reduction of phosphorescence intensity (I_p) is directly proportional to the concentration of bismuth in the working range 0.16–14.4 ag spot^–1 (sample volume 0.40 L spot^–1, corresponding to the concentration range 0.40–36.0 fg mL^–1). The regression equation of the working curve is I_p=14.86+5.279×[Bi³⁺] (ag spot^–1) (n=6, r=0.9982). The detection limit of this method is 0.026 ag spot^–1 (corresponding to a concentration of 6.5×10^–17 g mL^–1).This sensitive, reproducible and accurate method has been used for successful analysis of real samples.     

Photophysical properties of a tetraphenoxy-substituted perylene bisimide derivative characterized by single-molecule spectroscopy.

We present a detailed study of the photophysical properties of a tetraphenoxy-substituted perylene bisimide derivative. The probe molecules were immobilized in a Shpol'skii matrix of hexadecane and investigated by single-molecule spectroscopy at cryogenic temperatures. By using single-molecule spectroscopic techniques we reveal the triplet substate kinetics and the fluorescence quantum yield, and we provide an estimate for the S1-S0 transition dipole moment.     

Cyclic Heptapeptides Axinastatin 2, 3, and 4: Conformational analysis and evaluation of the biological potential

The conformational analysis of naturally occurring cytostatic cyclic heptapeptides axinastatin 2, 3, and 4 was carried out by two-dimensional NMR spectroscopy in combination with distance-geometry (DG) and molecular-dynamics (MD) calculations in explicit solvents. The synthesized secondary metabolites were examined in (D₆)DMSO. Axinastatin 2 was also investigated in CD₃OH. In all structures, Pro² is in the i + 1 position of a βI turn and Pro⁶ occupies the i + 2 position of a βVIa turn about the cis amide bond between residue 5 and Pro^6. In all peptides, a bifurcated H-bond occurs between residue 4 CO and the amide protons of residue 1 and 7. For axinastatin 2 and 3, an Asn I_g turn was found about Asn¹ and Pro^2. We compared these structures with conformations of cyclic heptapeptides obtained by X-ray and NMR studies. A β-bulge motif with two β turns and one bifurcated H-bond is found as the dominating backbone conformation of cyclic all-L-heptapeptides. Axinastatin 2, 3, and 4 can be characterized by six trans and one cis amide bond resulting in a β/βVI(a)-turn motif, a conformation found for many cyclic heptapeptides. Detailed biological tests of the synthetic compounds in different human cancer cell lines indicates these axinastatins to be inactive or of low activity.     

Rapid speciation of Se(IV) and Se(VI) by flow injection–capillary electrophoresis system with contactless conductivity detection

A flow injection–capillary electrophoresis system with contactless conductivity detection and hydrostatic-pressure-generated flow was used for the fast and sensitive speciation of Se(IV) and Se(VI). The sample throughput was 25 samples per hour using a background electrolyte solution containing 8.75 mM l-histidine (His) adjusted to pH 4.00 with acetic acid. The repeatability of peak areas (n=8) was better than 1.41% and the limits of detection were 190 g L^–1 and 7.5 g L^–1 for Se(IV) and Se(VI), respectively. The interference from carbonate, typically present in water samples, was eliminated by using a low-pH electrolyte in which carbonate is uncharged and migrates at the EOF front. The method was applied to the analysis of Se(IV) and Se(VI) in soil samples that were spiked with both selenium species and the results for recovery of both selenium species were in good agreement with their introduced concentrations.     

Size-related vaporisation and ionisation of laser-induced glass particles in the inductively coupled plasma

Ongoing discussions about the origin of elemental fractionation occurring during LA-ICP-MS analysis show that this problem is still far from being well understood. It is becoming accepted that all three possible sources (ablation, transport, excitation) contribute to elemental fractionation. However, experimental data about the vaporisation size limit of different particles in the ICP, as produced in laser ablation, have not been available until now. This information should allow one to determine the signal contributing mass within the ICP and would further clarify demands on suitable laser ablation systems and gas atmospheres in terms of their particle size distribution.The results presented here show a vaporisation size limit of laser induced particles, which was found at particle sizes between 90 nm and 150 nm using an Elan 6000 ICP-MS. Due to the fact that the ICP-MS response was used as evaluation parameter, vaporisation and ionisation limits are not distinguishable.The upper limit was determined by successively removing the larger particles from the aerosol, which was created by ablation of a NIST 610 glass standard at a wavelength of 266 nm, using a recently developed particle separation device. Various particle fractions were separated from the aerosol entering the ICP. The decrease in signal intensity is not proportional to the decrease in volume, indicating that particles above 150 nm in diameter are not completely ionised in the ICP. Due to the limited removal range of the particle separation device, which cannot remove particles smaller than 150 nm, single hole ablations were used to determine the lower vaporisation limit. This is based on measurements showing that larger particles occur dominantly during the first 100 laser pulses only. After this period, the ratio of ICP-MS counts and total particle volume was found to be constant while most of the particles are smaller than 90 nm, indicating complete vaporisation and ionisation of these particles.To describe the influence of different plasma forward powers on the vaporisation limit, the range 1000–1600 W was studied. Results indicate that optimum vaporisation and ionisation occurs at 1300 W. However, an increase of the particle ionisation limit towards larger particles was not observed within the accuracy of this study using the full range of parameters available for optimisation on commonly used ICP-MS instruments.     

Evaluation of polymeric flocculants for oily water systems using a photometric dispersion analyzer

During oil production and treatment, oil-in-water (O/W) emulsions are formed. These dispersions require treatment prior to disposal. In order to improve oil/water separation processes through any physical process (decanting, flotation, centrifuging etc), the particle size of the dispersed phase should be increased. This may be obtained by a flocculation process, which consists in the agglomeration of several particles or drops using as flocculating agent hydrophilic high molecular weight macromolecules. Poly (ethylene-b-propylene oxide) and poly (vinyl alcohol) polymers have been evaluated as flocculating agents for oily water systems. Their performance is related to the particle size increase of the dispersed phase. In this work, a photometric dispersion analyzer (PDA) has been used to accomplish the oil drop agglomeration. Synthetic as well as produced water was used. Data are in good agreement with previous tests. Qualitative information related to aggregates or particle size distribution of the oily water systems can be obtained using PDA.