Photo-triggered hydrogen atom transfer from an iridium hydride complex to unactivated olefins

Many photoactive metal complexes can act as electron donors or acceptors upon photoexcitation, but hydrogen atom transfer (HAT) reactivity is rare. We discovered that a typical representative of a widely used class of iridium hydride complexes acts as an H-atom donor to unactivated olefins upon irradiation at 470 nm in the presence of tertiary alkyl amines as sacrificial electron and proton sources. The catalytic hydrogenation of simple olefins served as a test ground to establish this new photo-reactivity of iridium hydrides. Substrates that are very difficult to activate by photoinduced electron transfer were readily hydrogenated, and structure–reactivity relationships established with 12 different olefins are in line with typical HAT reactivity, reflecting the relative stabilities of radical intermediates formed by HAT. Radical clock, H/D isotope labeling, and transient absorption experiments provide further mechanistic insight and corroborate the interpretation of the overall reactivity in terms of photo-triggered hydrogen atom transfer (photo-HAT). The catalytically active species is identified as an Ir(ii) hydride with an Ir^II–H bond dissociation free energy around 44 kcal mol⁻¹, which is formed after reductive ³MLCT excited-state quenching of the corresponding Ir(iii) hydride, i.e. the actual HAT step occurs on the ground-state potential energy surface. The photo-HAT reactivity presented here represents a conceptually novel approach to photocatalysis with metal complexes, which is fundamentally different from the many prior studies relying on photoinduced electron transfer.

Upon irradiation with visible light, an iridium hydride complex undergoes hydrogen atom transfer (HAT) to unactivated olefins in presence of a sacrificial electron donor and a proton source.     

Photochemische Reaktionen. 68. Mitteilung. Die Photoisomerisierung von α,β-ungesättigten γ,δ-Epoxyketonen: 9α, 10α- und 9β, 10β-Oxido-3-oxo-17β-acetoxy-Δ4-östren

Irradiation in the n→π* absorption band of the α,β-unsaturated γ,δ-epoxyketone 5 in ethanol at ?65° exclusively afforded the rearranged ene-dione 13 , whereas at + 24° under otherwise unchanged reaction conditions or upon triplet sensitization with Michler's ketone and with acetophenone at + 24° essentially identical mixtures of 13 (major product), 14 , and 15 were obtained. Selective π→π* excitation of 5 at ?78° and + 24° led to similar product patterns. The 9β,10β-epimeric epoxyketone 7 selectively isomerized to 14 and 15 at + 24° and n → π* or π → π* excitation. Neither the epoxyketones 5 and 7 nor the photoproducts 13–15 were photochemically interconverted. In separate photolyses each of the latter gave the double bond isomers 16 , 18 , and 19 , respectively. Cleavage of 13 to the dienone aldehyde 17 competed with the double bond shift ( → 16 ) when photolyzed in alcoholic solvents instead of benzene. The selective transformations 5 → 13 (at ?65° and n → π* excitation) and 7 → 14 + 15 are attributed to stereoelectronic factors facilitating the skeletal rearrangements of the diradicals 53 and 55 , the likely primary photoproducts resulting from epoxide cleavage in the triplet-excited compounds 5 and 7 , via the transition states 54 , 56 , and 57 . The loss of selectivity in product formation from 5 at higher temperature and n → π* excitation or triplet sensitization is explicable in terms of radical dissociation into 58 and 59 increasingly participating at the secondary thermal transformations of 53 . The similar effect of π → π* excitation even at ?78° indicates that some of the π,π* singlet energy may become available as thermal activation energy. It is further suggested that the considerably lesser ring strain in 14 and 15 , as compared with 13 , is responsible that selectivity in product formation from 7 is maintained also at +24° and at π → π* excitation.     

The α‐ and β‐epoxides of 3β‐acet­oxy‐5α‐lanost‐9(11)‐en‐7‐one

The structures of 3β‐acet­oxy‐9α,11α‐ep­oxy‐5α‐lanost‐9(11)‐en‐7‐one and 3β‐acet­oxy‐9β,11β‐ep­oxy‐5α‐lanost‐9(11)‐en‐7‐one, C₃₂H₅₂O₄, differ in their respective substituted cyclo­hexa­none rings but adopt similar conformations in the other three rings. In both of the crystal structures, weak inter­molecular C—H⋯O inter­actions are present.     

Assignment of E/Z isomers in Schiff bases of 3-acyltetramic acids with ethylenediamine by 1H and 13C NMR spectroscopy

The reaction of ethylenediamine with an equivalent mixture of diversely substituted 3-acyltetramic acids leads to Z/Z, Z/E, E/Z and E/E isomers. The E/Z isomerisation is slow in the NMR time scale of the ¹H and ¹³C chemical shifts; therefore at room temperature and in deuterochloroform all isomers of the new synthesized asymmetric compounds N,N′-ethylene-(1-ethyl-5,5-dimethyl-1′,5′,5′-trimethyl-3,3′-acetyltetramic acid) a, N,N′-ethylene-(5,5-dimethyl-1′,5′,5′-trimethyl-3,3′-acetyltetramic acid) b and, N,N′-ethylene-(1,5,5-trimethyl-1′,5′,5′-trimethyl-3-acetyl-3′-formyl-tetramic acid) c could be found in the corresponding spectra. To assign the ¹³C NMR signals we used two-dimensional ¹³C-¹H one-bond (HMQC) and ¹³C-¹H multibond (HMBC) correlated spectroscopy and the empirical rule that CO signals involved in hydrogen bonds are shifted to a lower field. The relative stability of isomers depending on substitution pattern could be estimated from the composition of the equilibria. b crystallizes as Z/Z isomer from ethanolic solution. The X-ray structural analysis of b has shown two CH-O hydrogen bonds. Received: 31 May 1996 / Revised: 26 June 1996 / Accepted: 1 July 1996     

Sequencing of sulfonic acid derivatized peptides by electrospray mass spectrometry

We report the application of nanoelectrospray ionization tandem mass spectrometry (nES-MS/MS) and capillary LC/microelectrospray MS/MS (cLC/&mgr;ES-MS/MS) for sequencing sulfonic acid derivatized tryptic peptides. These derivatives were specifically prepared to facilitate low-energy charge-site-initiated fragmentation of C-terminal arginine-containing peptides, and to enhance the selective detection of a single series of y-type fragment ions. Both singly and doubly protonated peptides were analyzed by MS/MS and the results were compared with those from their derivatized counterparts. Model peptides and peptides from tryptic digests of gel-isolated proteins were analyzed. Derivatized singly protonated peptides fragment in the same way by nES-MS/MS as they do by post-source decay matrix-assisted laser desorption/ionization mass spectrometry (PSD-MALDI-MS). They produce fragment ion spectra dominated by y-ions, and the simplified spectra are readily interpreted de novo. Doubly protonated peptides fragment in much the same way as their non-derivatized doubly protonated counterparts. The fragmentation of doubly protonated derivatives is especially useful for sequencing peptides that possess a proline residue near the N-terminus of the molecule. The singly protonated forms of these proline-containing derivatives often show enhanced fragmentation on the N-terminal side of the proline and considerably reduced fragmentation on the C-terminal side. In addition, sulfonic acid derivatization increases the in-source fragmentation of arginine-containing peptides. This could be useful for sequence verification and sequence tagging for use in single stage mass spectrometry. Copyright 2000 John Wiley & Sons, Ltd.     

Binding N2, N2H2, N2H4, and NH3 to transition-metal sulfur sites: modeling potential intermediates of biological N2 fixation

In the quest for low-molecular-weight metal sulfur complexes that bind nitrogenase-relevant small molecules and can serve as model complexes for nitrogenase, compounds with the [Ru(PiPr(3))('N(2)Me(2)S(2)')] fragment were found ('N(2)Me(2)S(2)'(2-)=1,2-ethanediamine-N,N'-dimethyl-N,N'-bis(2-benzenethiolate)(2-)). This fragment enabled the synthesis of a first series of chiral metal sulfur complexes, [Ru(L)(PiPr(3))('N(2)Me(2)S(2)')] with L=N(2), N(2)H(2), N(2)H(4), and NH(3), that meet the biological constraint of forming under mild conditions. The reaction of [Ru(NCCH(3))(PiPr(3))('N(2)Me(2)S(2)')] (1) with NH(3) gave the ammonia complex [Ru(NH(3))(PiPr(3))('N(2)Me(2)S(2)')] (4), which readily exchanged NH(3) for N(2) to yield the mononuclear dinitrogen complex [Ru(N(2))(PiPr(3))('N(2)Me(2)S(2)')] (2) in almost quantitative yield. Complex 2, obtained by this new efficient synthesis, was the starting material for the synthesis of dinuclear (R,R)- and (S,S)-[micro-N(2)[Ru(PiPr(3))('N(2)Me(2)S(2)')](2)] ((R,R)-/(S,S)-3). (Both 2 and 3 have been reported previously.) The as-yet inexplicable behavior of complex 3 to form also the R,S isomer in solution has been revealed by DFT calculations and (2)D NMR spectroscopy studies. The reaction of 1 or 2 with anhydrous hydrazine yielded the hydrazine complex [Ru(N(2)H(4))(PiPr(3))('N(2)Me(2)S(2)')] (6), which is a highly reactive intermediate. Disproportionation of 6 resulted in the formation of mononuclear diazene complexes, the ammonia complex 4, and finally the dinuclear diazene complex [micro-N(2)H(2)[Ru(PiPr(3))('N(2)Me(2)S(2)')](2)] (5). Dinuclear complex 5 could also be obtained directly in an independent synthesis from 1 and N(2)H(2), which was generated in situ by acidolysis of K(2)N(2)(CO(2))(2). Treatment of 6 with CH(2)Cl(2), however, formed a chloromethylated diazene species [[Ru(PiPr(3))('N(2)Me(2)S(2)')]-micro-N(2)H(2)[Ru(Cl)('N(2)Me(2)S(2)CH(2)Cl')]] (9) ('N(2)Me(2)S(2)CH(2)Cl'(2-) =1,2-ethanediamine-N,N'-dimethyl-N-(2-benzenethiolate)(1-)-N'-(2-benzenechloromethylthioether)(1-)]. The molecular structures of 4, 5, and 9 were determined by X-ray crystal structure analysis, and the labile N(2)H(4) complex 6 was characterized by NMR spectroscopy.     

Nonlinear analysis of dynamic binding in affinity capillary electrophoresis demonstrated for inclusion complexes of beta-cyclodextrin

The stability of the molecular host-guest inclusion complexes of beta-cyclodextrin with benzoate and four different hydroxybenzoates is investigated. For the measurement of the binding constants an experimental method is devised that is based on affinity capillary electrophoresis (ACE) with indirect UV absorbance detection. We derive an explicit equation for effective mobilities in ACE experiments without violation of rigorous mass balance. This equation is employed in the nonlinear least-squares analyses of the experimental data yielding binding constants of 48+/-2 M(-1) for benzoate, 299+/-38 M(-1) for 2-hydroxybenzoate, 37+/-1 M(-1) for 3-hydroxybenzoate, 228+/-9 M(-1) for 4-hydroxybenzoate, and 895+/-110 M(-1) in the case of 2,4-dihydroxybenzoate.     

Use of U-shaped donor-bridge-acceptor molecules to study electron tunneling through nonbonded contacts

A systematic determination of electronic coupling matrix elements in U-shaped molecules is demonstrated. The unique architecture of these systems allows for the determination of the electronic coupling through a pendant molecular moiety that resides between the donor and acceptor groups; this moiety quantifies the efficiency of electron tunneling through nonbonded contacts. Experimental electron-transfer rate constants and reaction free energies are used to calibrate a molecular-based model that describes the solvation energy. This approach makes it possible to experimentally determine electronic couplings and compare them with computational values.     

Polysulfonylamine. CLXIII [1] Kristallstrukturen von Metall‐di(methansulfonyl)amiden. 12 [1] Das orthorhombische Doppelsalz Na2Cs2[(CH3SO2)2N]4·3H2O: Ein dreidimensionales Koordinationspolymer aus (Caesium‐Anion‐Wasser)‐Schichten und intercalierten Natriumionen

Polysulfonylamines. CLXIII. Crystal Structures of Metal Di(methanesulfonyl)amides. 12. The Orthorhombic Double Salt Na₂Cs₂[(CH₃SO₂)₂N]₄·3H₂O: A Three‐Dimensional Coordination Polymer Built up from Cesium‐Anion‐Water Layers and Intercalated Sodium Ions The packing arrangement of the three‐dimensional coordination polymer Na₂Cs₂[(MeSO₂)₂N]₄·3H₂O (orthorhombic, space group Pna2₁, Z′ = 1) is in some respects similar to that of the previously reported sodium‐potassium double salt Na₂K₂[(MeSO₂)₂N]₄·4H₂O (tetragonal, P4₃2₁2, Z′ = 1/2). In the present structure, four multidentately coordinating independent anions, three independent aquo ligands and two types of cesium cation form monolayer substructures that are associated in pairs to form double layers via a Cs(1)—H₂O—Cs(2) motif, thus conferring upon each Cs⁺ an irregular O₈N₂ environment drawn from two N, O‐chelating anions, two O, O‐chelating anions and two water molecules. Half of the sodium ions occupy pseudo‐inversion centres situated between the double layers and have an octahedral O₆ coordination built up from four anions and two water molecules, whereas the remaining Na⁺ are intercalated within the double layers in a square‐pyramidal and pseudo‐C₂ symmetric O₅ environment provided by four anions and the water molecule of the Cs—H₂O—Cs motif. The net effect is that each of the four independent anions forms bonds to two Cs⁺ and two Na⁺, two independent water molecules are involved in Cs—H₂O—Na motifs, and the third water molecule acts as a μ₃‐bridging ligand for two Cs⁺ and one Na⁺. The crystal cohesion is reinforced by a three‐dimensional network of conventional O—H···O=S and weak C—H···O=S/N hydrogen bonds.     

On-column polymer-imbedded graphite inlet electrode for capillary electrophoresis coupled on-line with flow injection analysis in a poly(dimethylsiloxane) interface

A method for coupling an electrophoretic driven separation to a liquid flow, using conventional fused-silica capillaries and a soft polymeric interface is presented. A novel design of the electrode providing high voltage to the electrophoretic separation was also developed. The electrode consisted of a conductive polyimide/graphite imbedded coating immobilized onto the capillary electrophoresis (CE) column inlet. This integrated electrode gave the same separation performance as a commonly used platinum electrode. The on-column electrode also showed good electrochemical stability in chronoamperometric experiments. In addition, with this electrode design, the electrode position relative to the inlet end of the CE column will always be constant and well defined. The on-line flow injection analysis (FIA)-CE system was used with electrospray ionization (ESI)-time of flight (TOF)-mass spectrometry detection. The preparation of the PDMS (poly(dimethylsiloxane)) interface for FIA-CE is described in detail and used for initial tests of the on-column polymer-imbedded graphite inlet electrode. In this interface, a pressure-driven liquid flow, a make up CE electrolyte and a CE column inlet meet in a two-level cross (95 microm ID) in the PDMS structure, enabling independent flow characterization.