NiCl(2)(dppe)-catalyzed cross-coupling of aryl mesylates, arenesulfonates, and halides with arylboronic acids

An investigation of the NiCl(2)(dppe)-, NiCl(2)(dppb)-, NiCl(2)(dppf)-, NiCl(2)(PCy(3))(2)-, and NiCl(2)(PPh(3))(2)-catalyzed cross-coupling of the previously unreported aryl mesylates, and of aryl arenesulfonates, chlorides, bromides, and iodides containing electron-withdrawing and electron-donating substituents with aryl boronic acids, in the absence of a reducing agent, is reported. NiCl(2)(dppe) was the only catalyst that exhibited high and solvent-independent activity in the two solvents investigated, toluene and dioxane. NiCl(2)(dppe) with an excess of dppe, NiCl(2)(dppe)/dppe, was reactive in the cross-coupling of electron-poor aryl mesylates, tosylates, chlorides, bromides, and iodides. This catalyst was also efficient in the cross-coupling of aryl bromides and iodides containing electron-donating substituents. Most surprisingly, the replacement of the excess dppe from NiCl(2)(dppe)/dppe with excess PPh(3) generated NiCl(2)(dppe)/PPh(3), which was found to be reactive for the cross-coupling of both electron-rich and electron-poor aryl mesylates and chlorides. Therefore, the solvent-independent reactivity of NiCl(2)(dppe) provides an inexpensive and general nickel catalyst for the cross-coupling of aryl mesylates, tosylates, chlorides, bromides, and iodides with aryl boronic acids.     

The chemistry of the azanonaborane cluster RNH2---B8H11NHR

The preparation and properties of the R¹R²NH---B₈H₁₁NHR cluster are described. The cluster is stable to aqueous solutions and can be made water-soluble by the introduction of a few hydrophilic groups. This makes the cluster a good candidate as the boron moiety in compounds for boron neutron capture therapy. The chemistry of the cluster preparation, the stability of the cluster, and conditions for reactions of the organic moieties are reviewed. Pyridine derivatives of the cluster show electronic interaction between the cluster and the pyridine.     

Reactions of aromatic ketones with 3-mercapto-1,2-propanediol. Synthesis of cis- and trans-2-alkyl-2-aryl-(1,3-oxathiolane-5-methanols and 1,3-dioxolane-4-methanethiols)

Aromatic ketones react with 3-mercapto-1,2-propanediol ( 1 ) in refluxing benzene under the catalytic influence of a sulfonic acid and with azeotropic removal of water to yield a mixture comprised predominantly of cis- and trans-2-alkyl-2-aryl-1,3-oxathiolane-5-methanols 7, accompanied by lesser amounts of cis- and trans-2-alkyl-2-aryl-1,3-dioxolane-4-methanethiols 8 (up to 30%). It was discovered that 8 is the kinetic product and is isomerized by 4-toluenesulfonic acid in hot benzene to the thermodynamically more stable 7 . Under these conditions, ortho- and α-substituted aromatic ketones tend to produce more of 8 , which can be attributed to steric hindrance encountered by the thiol as it attacks the ketone. Ketalizations of 1-aryl-2-(1H-imidazol-1-yl)-1- as well as 1-aryl-2-(1,H-1,2,4-triazol-1-yl)-1-ethanones by 1 fail under these conditions, even after 24 hours of reflux in toluene. However, 1-(4-chlorophenyl)-3-(1H-imidazol-1-yl)-1-propanone and 1-(4-bromophenyl)-4-(1H-imidazol-1-yl)-1-butanone are ketalized by 1 as expected. Interestingly, the reaction of 2-bromo-4′-chloroace-tophenone with 1 produces 1-(4-chlorophenyl)-2,8-dioxa-6-thiabicyclo[3.2.1]octane. Characterization of all isomers and separation of some diastereomers is described. Nuclear Overhauser enhancement experiments are utilized to establish the stereochemistry of 1,3-oxathiolanes.     

Rb7[SiO4][VO4]: ein Ortho‐Silicat‐Vanadat(V)

Rb₇[SiO₄][VO₄]: an Ortho‐Silicate‐Vanadate(V) Rb₇[SiO₄][VO₄] has been obtained from a redox reaction between CdO and vanadium metal in the presence of Rb₂O and SiO₂ at 600 °C in an Ag container as yellow‐greenish transparent single crystals. The crystal structure determination (IPDS data: P2₁/c, a = 637.6(1) pm, b = 1039.7(1) pm, c = 2076.8(4) pm, β = 93.21(2)°, Z = 4, wR2 = 0.1319) reveals the presence of isolated complex anions, [SiO₄]^4— and [VO₄]^3—.     

The crystal structure of di-ortho-tolylmercury

The structure of di-ortho-tolylmercury has been determined by single crystal X-ray methods from counter data. The compound crystallizes in the monoclinic space group C2/c with unit cell dimensions a 10.970(2), b 10.448(3), c 11.409(3) Å; β 115.48(2)°, V 1180.5(5) ų, ?_calc 2.158 g/cm³ and Z = 4. The structure was solved with conventional heavy atom techniques. The crystal consists of individual molecular units with the mercury atom located on the crystallographic 2-fold axis of symmetry. The CHgC fragment is nearly linear with an angle of 178.0(4)°. The methyl groups lie on the same side of the molecule and the rings are twisted with respect to one another by 58.9°. The HgC bond distance is 2.09(1) Å.     

Multiplexed hybridizations of positively charge-tagged peptide nucleic acids detected by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Peptide nucleic acid (PNA) is a novel class of DNA analogues in which the entire sugar-phosphate backbone is replaced by a pseudopeptide counterpart. Owing to its neutral character and the consequent lack of electrostatic repulsion, PNA exhibits very stable heteroduplex formation with complementary nucleic acid that is essentially ionic strength independent and enables hybridization under minimum salt conditions. This feature as well as its superior ion stability and easy ionization compared to DNA renders PNA very attractive for hybridization-based matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) applications. We have developed an approach to DNA characterization that takes advantage of multiplexed PNA hybridizations analyzed by MALDI-TOFMS. Our motivation was the further development of oligonucleotide fingerprinting, an efficient technique for cDNA and genomic DNA library characterization. Through positive 'charge-tagging' of PNA the efficiency of detection in MALDI-TOFMS was considerably enhanced permitting an unparalleled degree of multiplexing. Results from the simultaneous hybridization of 21 charge-tagged PNA hexamer oligonucleotides showed that genomic DNA and cDNA clones are successfully characterized on the basis of their hybridization profiles. The degree of multiplexing achieved may render a significant increase in throughput and hence efficiency of oligonucleotide fingerprinting possible.     

Hydrogen determination by means of the1H(19F, αγ)16 O and1H(15N, αγ)12C resonance reactions

Hydrogen surface contamination and depth profiles can be measured by the resonant nuclear reactions¹H(¹⁹F, )¹⁶O and¹H(¹⁵N, )¹²C. The method was applied to study hydrogen-implanted silicon, amorphous silicon layers and silicon oxide films produced by anodic oxidation.     

Bestimmung von Iridiumspuren mit Dithizon mittels substöchiometrischer Isotopenverdünnungsanalyse

Iridium(III or IV) reacts with dithizone on heating at pH 6 to form a 1∶2 complex, which can be concentrated by extraction into chloroform. Based on this reaction, a reproducible, selective determination of iridium (1 ppb) is achieved by means of substoichiometric isotope dilution analysis based on¹⁹²Ir.     

Photocontrol of DNA binding specificity of a miniature engrailed homeodomain

Control of DNA binding of HDH-3, a 18-residue polypeptide based on the recognition helix of the Q50K engrailed homeodomain, has been achieved. HDH-3 was linked to an azobenzene cross-linker through two cysteine residues in an i, i + 11 spacing. For the thermodynamically stable trans configuration of the cross-linker, the dark-adapted peptide (dad-HDH-3) adopted a mainly alpha-helical structure as judged by circular dichroism (CD) spectroscopy. After irradiation with light of 360 nm, the helical content of the peptide (irrad-HDH-3) was reduced significantly and the CD spectrum of the irradiated peptide resembled that of the largely unstructured, unalkylated peptide. Despite lacking helices-1 and -2 and the N-terminal arm of Q50K engrailed, dad-HDH-3 bound to its natural DNA target sequence TAATCC (QRE) with high affinity (K(D) = 7.5 +/- 1.3 nM). The binding affinity for the mutant DNA sequence, TAATTA (ERE), was reduced significantly (K(D) = 140 +/- 11 nM). Unlike irrad-HDH-3, which like the unalkylated parent peptide displayed only marginal DNA binding specificity, dad-HDH-3 specified base pairs 5 and 6 of QRE with an accuracy rivaling that of the intact wild-type Q50K engrailed homeodomain, making dad-HDH-3 the most specific designed DNA binding miniature homeodomain reported to date. Moreover, DNA binding affinity and specificity of HDH-3 could be controlled externally by irradiation with light.     

Controlling the DNA binding specificity of bHLH proteins through intramolecular interactions

Reversible control of the conformation of proteins was employed to probe the relationship between flexibility and specificity of the basic helix-loop-helix protein MyoD. A fusion protein (apaMyoD) was designed where the basic DNA binding helix of MyoD was stablized by an amino-terminal extension with a sequence derived from the bee venom peptide apamin. The disulfide-stabilized helix from apamin served as a nucleus for a helix that extended for a further ten residues, thereby holding apaMyoD's DNA recognition helix in a predominantly alpha-helical conformation. The thermal stability of the DNA complexes of apaMyoD was increased by 13 degrees C relative to MyoD-bHLH. Measurements of the fluorescence anisotropy change on DNA binding indicated that apaMyoD bound to E-box-containing DNA sequences with enhanced affinity relative to MyoD-bHLH. Consequently, the DNA binding specificity of apaMyoD was increased 10-fold.