Hydrolytic protein cleavage mediated by unusual mononuclear copper(II) complexes: X-ray structures and solution studies

The crystal structures and redox and UV-vis/EPR spectroscopic properties of two new mononuclear copper(II) complexes, [Cu(HL1)Cl2] (1) and [Cu(L1)Cl] (2), prepared through the reaction between copper(II) chloride and the ligand 2-[(bis(pyridylmethyl)amino)methyl]-4-methyl-6-formylphenol (HL1) under distinct base conditions, are reported along with solution studies. Also, we demonstrate that these CuII complexes are able to cleave unactivated peptide bonds from bovine serum albumin (BSA) and the thermostable enzyme Taq DNA polymerase at micromolar concentration, under mild pH and temperature conditions. The cleavage activity seems to be specific with defined proteolytic fragments appearing after protein treatment. The location of the specific cleavage sites was tentatively assigned to solvent-accessible portions of the protein. These are two of the most active Cu(II) complexes described to date, since their cleavage activity is detected in minutes and evidence is here presented for a hydrolytic mechanism mediating protein cleavage by these complexes.     

Increase in removal of polycyclic aromatic hydrocarbons during bioremediation of crude oil-contaminated sandy soil

A 2³ full factorial experimental design was adopted to estimate the effects of three variables on the biodegradation of oil during soil bioremediation: bioaugmentation seeding a mixed culture, addition of fertilizer or mineral media, and correction of initial pH of the soil to 7.0. The tests were carried out in polyvinyl chloride reactors with 5.0 kg of crude oil-contaminated soil at 14 g/kg. After screening the variables, soil bioremediation tests were conduced with varied C:N ratios, yielding an increase in biodegradation of the oil heavy fraction from 24 to 65%, consumption of total n-paraffins, and a remarkable decrease in the concentration of residual polycyclic aromatic hydrocarbons of the soil.     

A Layer‐by‐Layer Film of Chitosan in a Taste Sensor Application

Chitosan is alternated with sulfonated polystyrene (PSS) to build layer‐by‐layer (LBL) films that are used as sensing units in an electronic tongue. Using impedance spectroscopy as the principle method of detection, an array using chitosan/PSS LBL film and a bare gold electrode as the sensing units was capable of distinguishing the basic tastes – salty, sweet, bitter, and sour – to a concentration below the human threshold. The suitability of chitosan as a sensing material was confirmed by using this sensor to distinguish red wines according to their vintage, vineyard, and brands.

PCA Plot for red wine samples obtained from impedance measurements at 1 kHz for the sensor array comprising a 3‐bilayer chitosan/PSS film and a bare gold electrode.     

Stability of anthocyanins extracted from grape skins

Summary The extractability and stability of anthocyanins from the skins ofVitis vinifera were determined at different pH values. Anthocyanins were extracted using acetone, partitioned with chloroform and pre-purified by solid-phase extraction (SPE). They were analysed by RP-HPLC, and the kinetic parameters of decomposition were calculated. The total monomeric anthocyanin content was determined by spectrophotometry. Anthocianins were well separated by RP-HPLC. The efficiency of extraction depended strongly on the pH of the extracting agent and on the character of the pigment to be extracted. The amount of anthocyanins decreased with increasing duration of storage, more so at elevated temperatures. Presented at Balaton Symposium '01 on High-Performance Separation Methods Siófok, Hungary, September 2–4, 2001.     

Penetration and interactions of the antimicrobial peptide, microcin J25, into uncharged phospholipid monolayers

Microcin J25 forms stable monolayers at the air-water interface showing a collapse at a surface pressure of 5 mN/m, 220 mV of surface potential, and 6 fV per squared centimeter of surface potential per unit of molecular surface density. The adsorption of microcin J25 from the subphase at clean interfaces leads to a rise of 10 mN/m in surface pressure and a surface potential of 220 mV. From these data microcin appears to be a poor surfactant per se. Nevertheless, the interaction with the lipid monolayer further increase the stability of the peptide at the interface depending on the mode in which the monolayer is formed. Spreading with egg PC leads to nonideal mixing up to 7 mN/m, with hyperpolarization and expansion of components at the interface, with a small excess free energy of mixing caused by favorable contributions to entropy due to molecular area expansion compensating for the unfavorable enthalpy changes arising from repulsive dipolar interactions. Above 7 mN/m microcin is squeezed out, leaving a film of pure phospholipid. Nevertheless, the presence of lipid at 10 and 20 mN/m stabilize further microcin at the interface and adsorption from the subphase proceeds up to 30 mN/m, equivalent to surface pressure in bilayers.     

Solid-phase fluorescence spectroscopy for the determination of acetylsalicylic acid in powdered pharmaceutical samples

A rapid, simple and rugged procedure without requiring any prior sample treatment was developed for the determination of acetylsalicylic acid (ASA) in tablets formulations by solid-phase fluorescence spectroscopy. The method was carried out on powdered samples, consisting of an active substance dispersed in lactose, maize starch, talc and magnesium stearate. Previous knowledge of the sample bulk composition is needed for proper application of the method. Wavelengths for maximum excitation and emission were 288 and 318 nm, respectively, and the fluorescence intensity was linear with ASA concentration within the 50-170 mg g⁻¹ range. Detection and quantification limits were 2.2 and 7.3 mg g⁻¹, and the analytical frequency was 200 h⁻¹. For a typical sample, the relative standard deviation of results was estimated as 2.3% (n = 10). Accuracy was assessed by comparing the analytical results obtained with the proposed method with those related to a reference method recommended by British Pharmacopoeia: no differences between the methods were found at the 95% confidence level.     

Singlet oxygen generation ability of squarylium cyanine dyes

The quantum yields for singlet oxygen generation of several squarylium cyanine dyes derived from benzothiazole, benzoselenazole and quinoline, displaying absorption within the so-called “phototherapeutic window” (600–1000 nm), were determined, envisioning their potential usefulness for photodynamic therapy (PDT). The determination was performed by a direct method measuring the luminescence decay of the dyes in the near infrared. Considering the absorption and the quantum yields displayed by some of the dyes, these seemed to be potential candidates as sensitizers for PDT.     

FT-Raman spectroscopy of lichens on dolomitic rocks: an assessment of metal oxalate formation

The FT-Raman spectra of five epilithic lichen taxa growing on dolomite and magnesium-rich carbonate rocks have been analysed and interpreted for the key molecular marker bands associated with calcium oxalate monohydrate (whewellite), calcium oxalate dihydrate (weddelite) and magnesium oxalate dihydrate. From the results, it can be concluded that the biomineral product of lichen biodeterioration involves the calcareous part of the substratum only; no trace of magnesium oxalate has been found in the Raman spectra. Two of the species, Lecanora sulfurea and Aspicilia calcarea, produce calcium oxalate monohydrate exclusively, but Dirina massiliensis f. sorediata, D. massiliensis f. massiliensis and Tephromela atra produce significant quantities of the dihydrate. An explanation is advanced for the exclusive accumulation of calcium oxalate into the lichen thallus despite the significant presence of magnesium ions.     

Determination of Aldehydes and Ketones in Fuel Ethanol by High-Performance Liquid Chromatography with Electrochemical Detection

A new methodology was developed for analysis of aldehydes and ketones in fuel ethanol by high-performance liquid chromatography (HPLC) coupled to electrochemical detection. The electrochemical oxidation of 5-hydroxymethylfurfural, 2-furfuraldehyde, butyraldehyde, acetone and methyl ethyl ketone derivatized with 2,4-dinitrophenylhydrazine (DNPH) at glassy carbon electrode present a well defined wave at +0.94 V; +0.99 V; +1.29 V; +1.15 V and +1.18 V, respectively which are the basis for its determination on electrochemical detector. The carbonyl compounds derivatized were separated by a reverse-phase column under isocratic conditions with a mobile phase containing a binary mixture of methanol / LiClO_4(aq) at a concentration of 1.0 × 10⁻³ mol L⁻¹ (80:20 v/v) and a flow-rate of 1.1mL min⁻¹ . The optimum potential for the electrochemical detection of aldehydes-DNPH and ketones-DNPH was +1.0 V vs. Ag/AgCl. The analytical curve of aldehydes-DNPH and ketones-DNPH presented linearity over the range 5.0 to 400.0 ng mL⁻¹, with detection limits of 1.7 to 2.0 ng mL⁻¹ and quantification limits from 5.0 to 6.2 ng mL⁻¹, using injection volume of 20 μL. The proposed methodology was simple, low time-consuming (15 min/analysis) and presented analytical recovery higher than 95%.     

Development of a rapid and specific assay for detection of busulfan in human plasma by high-performance liquid chromatography/electrospray ionization tandem mass spectrometry

A sensitive and specific assay for detection of busulfan in human plasma was developed. The assay is based on rapid isolation of busulfan by liquid-liquid extraction with ethyl acetate, and detection by high-performance liquid chromatography with electrospray ionization and tandem mass spectrometry. 1,6-Bis(methanesulfonyloxy)hexane, a synthesized analogue of busulfan, was used as the internal standard (IS). The acquisition was performed in the multiple reaction monitoring mode; busulfan and the IS were detected with no interferences from plasma matrix. The method was linear over the range 5-2500 ng mL(-1), with r2 > 0.99 and a run time of only 3.5 min. The intra- and inter-assay precisions were in the ranges 2.1-11.9% and 3.2-10.1%, respectively, and the intra- and inter-assay accuracies were 92.2-107.6% and 94.7-104.1%, respectively. The absolute recoveries were 82.0% (20 ng mL(-1)), 90.6% (1000 ng mL(-1)) and 80.0% (2000 ng mL(-1)) for busulfan, and 89.1% for the IS (1000 ng mL(-1)). The limits of detection and quantification were 2 and 5 ng mL(-1), respectively. The validated method was successfully applied to analyze plasma samples obtained from six adults receiving doses of 1 mg kg(-1) in a conditioning regimen prior to bone marrow transplantation. A marked intra-patient variation in busulfan concentrations during the steady state was observed, which limits the application of pharmacokinetic modeling and suggests that continuous therapeutic monitoring is necessary for adequate individualized dosing. In this regard, the present assay brings important advantages relative to other methods described in the literature, i.e., it is highly specific and simple to perform, with a rapid chromatographic run time (3.5 min), and the whole procedure can be completed in 4-5 h, which would permit dose corrections after the third dose allowing earlier and better dosing adjustments towards the target level of busulfan.