Biotransformation of (−)β-pinene by Aspergillus niger ATCC 9642

The main objective of this work was to investigate the biotransformations of (−)α-pinene, (−)β-pinene, and (+) limonene by Aspergillus niger ATCC 9642. The culture conditions involved—concentration of cosolvent (EtOH), substrate applied, and sequential addition of substrates—were investigated. Adaptation of the precultures with small amounts of substrate was also studied. The experiments were performed in conical flasks with liquid cultures. This strain of A. niger was able to convert only (−)β-pinene into α-terpineol. An optimum conversion of (−)β-pinene into α-terpineol of about 4% was obtained when the substrate was applied as a diluted solution in EtOH and sequential addition of substrate was used.     

Molecular-level control of the photoluminescence from PPV nanostructured films

The fabrication of varied molecular architectures in layer-by-layer (LbL) films is exploited to control the photoluminescence (PL) of poly(p-phenylene vinylene) (PPV) in an unprecedented way. This was achieved by controlling the F?rster energy transfer between PPV layers (donors) and layers of a commercial azodye, Brilliant Yellow (BY) (acceptors). Energy transfer was controlled by inserting spacer layers of inert polymers between PPV and BY layers and by photoaligning the BY molecules via trans-cis-trans isomerization. The PPV/BY LbL films displayed polarized PL whose intensity could be varied almost continuously by changing the time of photoalignment, which was carried out by impinging a linearly polarized laser light simultaneously to the PL experiments. For PPV/BY films with no spacer layers, PL was completely quenched, but its intensity increased with the number of spacing layers. Further increase in PL was obtained by photoaligning the BY molecules perpendicularly to the PPV molecules. This minimizes energy transfer, since F?rster processes are directional, dipole-dependent resonant transfers. Energy transfer is also controlled by imparting a preferential orientation of the PPV chains on PPV/BY LbL films deposited onto flexible Teflon substrates that may be stretched.     

A new electrolytic dissolution of aluminum alloys and determination of some constituents by inductively coupled plasma optical emission spectrometry

The new electrolytic dissolution in batch of aluminum alloys samples as grains or turns and the determination of Fe, Cu, Mn, Mg, Cr, Ni, Zn, Pb and Ti by ICP OES was investigated. In on-line electrodissolution procedures described in the literature, samples were restricted to be in the form of solid blocks or plates with one polished flat face. Here, the sample was loaded in the barrel of a modified disposable syringe (the anodic semi-cell) and pressed with a modified plunger fitted with a platinum disk to establish electrical contact with the analyte. This arrangement was introduced in a beaker containing the electrolyte (1 mol L⁻¹ HNO₃) and a platinum wire as the cathode. The resulting solution from electrodissolution (0.6 A) was used for the ICP OES determinations. The influence of the aluminum concentration increase on the determination of the elements was evaluated. Electrodissolution of certified reference materials and commercial samples revealed relative errors lower than 10% for the elements Fe, Cu, Mg, Ni, Cr, Zn and Ti (when their content is above 0.1%). Higher inaccuracies (>10%) were observed for Mn and for Fe in B.C.S. 268/1 reference material certified. The proposed method presented a relative standard deviations (R.S.D.) lower or circa 10% to all of the elements (except Pb). In comparison with traditional acid dissolution, the proposed electrodissolution method is relatively fast (about 30 min), it is clean (there is no projection of solution) and simple (heating and fumes exhaust system were not necessaries).     

A comparative study for elastic electron collisions on the isoelectronic CNN, NCN, and CCO radicals

In this work, we present a theoretical study on elastic electron collisions from three isoelectronic free radicals (CNN, NCN, and CCO) in the low incident energy range. More specifically, calculated differential, integral, and momentum transfer cross sections are reported in the 1-30 eV energy range. Calculations are performed in the static-exchange and static-exchange-polarization levels. The iterative Schwinger variational method is used to solve the scattering equations. Our study reveals that the calculated cross sections for the three targets are significantly different at incident energies below 10 eV. Above that energy, a remarkable similarity among the calculated results is seen.     

Discrimination between ethanol inhibition models in a continuous alcoholic fermentation process using flocculating yeast

Discrimination between different rival models for describing the inhibitory effect of ethanol both on yeast growth and on fermentation was studied for a continuous process of alcoholic fermentation in a tower reactor with recycling of flocculating cells. Models tested include linear, parabolic, hyperbolic, exponential, and generalized nonlinear power-law types. The best expressions were identified under the criteria that all the kinetic parameters should assume acceptable values in a feasible range and should result in the best fit of the experimental data. The kinetic parameters were estimated from steady-state data of several sugar concentrations in feeding stream (S₀ = 160, 170, 180, 190, 200 g/L), constant dilution rate (D = 0.2 h^-1), recycle ratio (α = 13.6), and temperature (T = 30°C). The best model for the yeast growth was of power-law type, whereas for the product formation the best model was of linear type. These models were able to reproduce the trends of the process variables satisfactorily.     

Fluorescence study of the interaction between metal ions and methyl methacrylate–methacrylic acid copolymers in aqueous solutions: thallium(I), calcium(II), and terbium(III)

 The binding of the cations thallium(I), calcium(II) and terbium(III) to methyl methacrylate– methacrylic acid copolymers with different fractions of acid groups (x) has been studied in aqueous solution at various pH values using the fluorescence of covalently bonded 9-vinyl anthracene as a probe. In all cases, the extent of binding increases as a function of the charge of the polymer with either increasing fraction of carboxylic acids or of pH. However, differences are observed in the behavior of the three cations. With Tl(I), quenching of the anthracene group fluorescence is observed, indicating that the thallium(I) approaches the probe and suggesting that the alkylanthracene is probably in a relatively polar region. Binding constants have been determined from anthracene quenching data and from studies with the fluo-rescent-probe sodium pyrenetetra-sulfonate. Good agreement is obtained between the two methods, and values for the binding constants increase from 250 to 950 M^-1 as x increases from 0.39 to 1. It is suggested that the cation is held in the polyelectrolyte domain, partly by Debye–Hückel effects and partly by more specific interactions. Stronger binding is found with calcium(II) and terbium(III), and in this case increases in fluorescence intensity are observed on complexation due to the anthracene group being in a more hydrophobic region, probably as a result of conformational changes in the polymer chain. In the former case the stoichiometry of the interaction was determined from the fluorescence data to involve two carboxylate groups bound per calcium. Association constants were found using murexide as an indicator of free calcium to vary from 8400 to 37 000 M^-1 as x increases from 0.39 to 1. It is suggested that in this case specific calcium(II)–carboxylate interactions contribute to the binding. With terbium(III), a greater increase in the probe fluorescence intensity was observed than with calcium, and it is suggested that the interaction with the polymer is even stronger, leading to a more pronounced conformational change in the polymer. It is proposed that the terbium(III) interacts with six carboxylic groups on the polymer chain, with three being coordinated and three attracted by electrostatic interactions. Received: 10 June 1997 Accepted: 24 October 1997     

Phosphorus determination in milk and bone samples by neutron activation analysis

The determination of phosphorus in milk and bone samples by both radiochemical and instrumental neutron activation analysis is described. The radiochemical method consists of thermal neutron irradiation of samples and standards, sample dissolution, phosphorus precipitation as ammonium phosphomolyb-date, use of zinc holdback carrier and counting of the phosphorus-32 ß-activity. The instrumental method involves thermal neutron irradiation of samples and standards, waiting for a decay time and ß-counting. The methods were applied to commercial samples and reference materials.     

SFE of rosemary oil: Assessment of the influence of process variables and extract characterization

The effects of temperature and solvent density on the characteristics of the extracts obtained from supercritical fluid extraction (SFE) of the volatile compounds from Brazilian rosemary (Rosamarinus officianalis L., Labiatae) using carbon dioxide (CO₂) as solvent were investigated. The experiments were performed in a semi-batch laboratory scale home-made unit at two temperatures, viz. 310.15 and 320.15 K, over the pressure range of 100-160 bar. This study allowed to determine the crossover point and the maximum solubility of the oil. The products were analyzed by HRGC-MS, and compounds grouped in three different classes according to their molecular mass distribution in order to evaluate the influence of the variables studied on the characteristics of the extracts. The model proposed by Sovová was adopted in an attempt to interpret the mass transfer phenomena in the extraction process.     

Antibody-recruiting protein-catalyzed capture agents to combat antibiotic-resistant bacteria

Antibiotic resistant infections are projected to cause over 10 million deaths by 2050, yet the development of new antibiotics has slowed. This points to an urgent need for methodologies for the rapid development of antibiotics against emerging drug resistant pathogens. We report on a generalizable combined computational and synthetic approach, called antibody-recruiting protein-catalyzed capture agents (AR-PCCs), to address this challenge. We applied the combinatorial protein catalyzed capture agent (PCC) technology to identify macrocyclic peptide ligands against highly conserved surface protein epitopes of carbapenem-resistant Klebsiella pneumoniae, an opportunistic Gram-negative pathogen with drug resistant strains. Multi-omic data combined with bioinformatic analyses identified epitopes of the highly expressed MrkA surface protein of K. pneumoniae for targeting in PCC screens. The top-performing ligand exhibited high-affinity (EC₅₀ ∼50 nM) to full-length MrkA, and selectively bound to MrkA-expressing K. pneumoniae, but not to other pathogenic bacterial species. AR-PCCs that bear a hapten moiety promoted antibody recruitment to K. pneumoniae, leading to enhanced phagocytosis and phagocytic killing by macrophages. The rapid development of this highly targeted antibiotic implies that the integrated computational and synthetic toolkit described here can be used for the accelerated production of antibiotics against drug resistant bacteria.

Antibody-recruiting protein-catalyzed capture agent (AR-PCCs) are a new class of all-synthetic and highly targeted antibiotics that recruit endogenous immune responses to eliminate drug-resistant microbes.