Determination of Low Contents of Fenpiverine Bromide by Extraction Spectrophotometry

An ion-pair extraction spectrophotometry method was developed for the determination of fenpiverine bromide in tablets. To determine this substance it was necessary to find experimental conditions that would allow eliminating the influence of other components of the tablets. Attention was paid to the fact that a suitable pH of water phase was necessary to achieve high selectivity.Received December 11, 2002; accepted April 24, 2003 Published online July 28, 2003     

Extraction of macro- and microamounts of lanthanides by D2EHPA

The effect of macroconcentration (Ma) lanthanide extraction on the microcomponent (Mi) extraction by D2EHPA was investigated. The investigation corroborated that the macrocomponent suppresses the microcomponent extraction. The extractability of Mi decreases with increasing Ma concentration and with increasing proton lanthanide number in macroconcentrations. Semi-empirical relations were derived describing lanthanide extraction in lanthanide macro- and microconcentrations as a function of the extraction of lanthanide macroconcentrations. Under the conditions discussed, these relations can be used to estimate for any lanthanide the distribution ratios for the lanthanide applied as a macrocomponent and for Eu applied as a microcomponent.     

The use of liquid scintillation spectrometry for the determination of radionuclidic purity of 90Y from a radiochemical 90Y/90Srgenerator

Summary An extraction technique for the separation of ⁹⁰Sr from a high excess of⁹⁰Y has been developed. This procedure can be used for the determination of trace amounts of⁹⁰Sr in⁹⁰Y prepared by a radiochemical⁹⁰Y/⁹⁰Sr generator by liquid scintillation.     

Coated-wire organic ion-selective electrodes in titrations based on ion-pair formation : Determination of arenediazonium salts with sodium tetraphenylborate

Titrimetric determinations of arenediazonium salts can be based on ion-pair formation between the diazonium cation and tetraphenylborate. Titrations are done under cooling with ice and are followed potentiometrically with organic ion-selective electrodes comprising PVC membranes plasticized with polar solvents and coated on aluminium wires. The method was tested in determinations of arenediazonium salts derived from 20 aromatic amines, including aniline, toluidines, naphthylamines and their derivatives. Except for compounds containing hydrophylic groups such as —COOH and —OH, the potentiometric titration curves have well defined end-points. The results are reproducible, with relative standard deviations in the range 0.4–1.4% at the millimolar level. The method can be used for reliable determinations of arenediazonium salts in analytical control of azo dyestuff production.     

Extraction separation of strontium and yttrium radionuclides by hydrogen heptachlorodicarbollylcobaltate in the presence of benzo-15-crown-5

Extraction of strontium and yttrium by the nitrobenzene solution of H⁺-form of heptachloro-bis-1,2-dicarbollylcobaltate (H⁺B^–) in the presence of benzo-15-crown-5 (B15C5, L) has been investigated. The presence of B15C5 leads to a great synergistic effect for the extraction of strontium and an antagonistic effect for the extraction of yttrium. The extraction constants of Sr²⁺ complexes of B15C5 were determined. The separation factor a(Sr/Y) in the system with B15C5 presents the same order of magnitude as that for 15C5.     

Sol-Gel Fabrication and Properties of Silica Cores of Optical Fibers Doped with Yb3+, Er3+, Al2 O3 or TiO2

Optical cores of preforms for drawing optical fibers doped with Er3+ and Yb3+ were fabricated by the sol-gel method with the aim of increasing the thickness of glass layers coated in a single coating cycle and to determine the relation between the preparation conditions and optical properties of the fibers. Al2O3-P2O5-SiO2 and TiO2-P2O5-SiO2 glasses have been studied as matrices for entrapping the rare-earth elements. Input sols have been prepared from silicon and titanium alkoxides, AlCl3, ErCl3, YbCl3, POCl3, water and a modifier under acidic catalysis of HCl. The sols were coated on the inner wall of a silica substrate tube and the gel layers were sintered at high temperatures up to 2000°C after which the tube was collapsed into the preform. Continuous and homogenous glass films with the maximum thickness of about 8 m were fabricated. The influence of high-temperature heat treatment of the layers on their composition and optical attenuation was observed. The amplified stimulated emission of Er3+ around 1.55 m was measured under the excitation of the fibers by an Nd : YAG laser at 1.064 m.     

Statistical approach to bistable behaviour of a nonlinear system in a stationary field

Conclusions This discussion concerning the probability density confirms in a new way the results obtained in paper [1] in which a two-peak behaviour of the photocount distribution has been found. This general result depends on the particular nonlinear interaction scheme, and the bistable behaviour is caused by quantum fluctuations produced by the nonlinear interaction.As losses are not taken into account, other kinds of fluctuations that can modify the bistable behaviour are not accounted for in this paper.     

Field alpha-spectroscopy of radon (<Superscript>222</Superscript>Rn) and actinon (<Superscript>219</Superscript>Rn) progeny in soil gas: Locating a radon source

Summary The activities of²¹⁸Po,²¹⁴Po and²¹¹Bi were determined in samples obtained of soil/gas. Sampling work was taken in Jáchymov (Czech Republic) at the outcrop of the Geister-vein,by electrostatic precipitation from filtered soil gas on stainless steel disks.The samples were measured in a field laboratory using a semi-conductor alpha-spectrometer.The activities of²¹⁸Po,²¹⁴Po and²¹¹Bi were calculated.Samples taken from active dump material (near-by radon source) exhibited a high²¹¹Bi/²¹⁴Po ratio, while those of the vein outcrop (a relatively deeper source) had a low ratio.A mathematical model was employed to determine the radon age calculated from the actinon/radon input ratio.This varied in a range of 5.6 to -7.7 seconds.Negative age values are probably caused by the preference for actinon, which rapidly comes into equilibrium with the source of this gas.     

The luminescence efficiency of YAG: Ce phosphors

The luminescence intensity of Yttrium aluminium garnet activated by the Ce³⁺ (YAGCe³⁺) under cathode-ray excitation depends on the preparation method and content of some dopants. Samples containing Fe, Pt, Ir or some colour centre, respectively, show relatively low luminescence. The maximum luminescence intensity was obtained with the Czochralski method grown single crystals in 98% Ar+2% H₂ atmosphere which were sensitized by oxygen annealing followed by treatment at 1500 °C in molybdenum container using a wet hydrogen atmosphere.