Pressurised solvent extraction of nitrated derivatives of polycyclic aromatic hydrocarbons from roadside dust

An analytical method based upon the pressurised solvent extraction and gas chromatography and mass spectrometry (GC-MS) for analysis of nitrated derivatives of polycyclic aromatic hydrocarbons (nitro-PAHs) in roadside dust has been developed. Five nitro-PAHs (1-nitronaphthalene, 1-nitropyrene, 9-nitroanthracene, 2-nitrofluorene, 6-nitrochrysene) were chosen for this study because of their variable physical properties and effect on human health. Experiments with spiked inert matrix were used for the best extraction conditions finding. Different extraction conditions (temperature, pressure, solvents and duration of extraction cycle) were examined. The highest recoveries were observed at the extraction pressure of 14?MPa, temperature of 100°C and two cycles of 5?min extraction time, when dichloromethane was used as an extraction solvent. These conditions were applied to the extraction of nitro-PAHs from roadside dust. After extraction the nitro-PAHs fraction was isolated by the silica gel column chromatography. The GC-MS detector was used for analyses of the extracts. Recoveries of nitro-PAHs after extraction from roadside dust ranged from 60% for 9-nitroanthracene to 108% for 6-nitrochrysene.     

Simultaneous determination of inorganic arsenic,antimony, selenium and tellurium by ICP-MS in environmental waters using SPE preconcentration on modified silica

This paper deals with a simplified multi-element profiling of inorganic arsenic, antimony, selenium and tellurium in the form of ⁷⁵As, ⁸²Se, ¹²¹Sb and ¹²⁵Te by ICP-MS for amounts less than 10?µg?L^?1. Internal standards such as ⁷²Ge and ²⁰⁹Bi were successfully used for the suppression of both influence of macro elements Na⁺, K⁺, Ca²⁺, Mg²⁺ or Al³⁺, and interference of limited concentrations of heavy metal ions. Modified silica sorbents Separon? SGX C18, C8, CN, NH₂, RPS and Phenyl were tested for the preconcentration of As, Sb, Se and Te (0.25–5?µg?L^?1) in the form of ion associates with cationic surfactants from 50–250?mL sample volume. 1-etoxycarbonyl-pentadecyltrimethylammonium bromide (Septonex®, 0.005?mol?L^?1) was suitable for this purpose in the presence of 4-(2-pyridylazo) resorcinol, 2-pyrrolidinecarbodithioate and 8-hydroxyquinoline-5-sulphonic acid. The quantitative retention occurred at pH 7?±?0.2 and the mixture of acetone with ethanol in ratio 1?:?1 in the presence of 0.1?mol?L^?1 HCl was used for the quantitative elution. Organic solvents and the excess of acid were removed by evaporation prior to the determination by ICP-MS. The determination of the above trace metalloids in various kinds of water with enrichment factor till 50 times on silica Separon? SGX C18 and the above reagents were compared with the standard addition method.     

Role of reaction atmosphere in preparation of potassium tantalate through sol–gel method

Potassium tantalate (KT) thin films and powders of both K₂Ta₂O₆ (KT pyrochlore) and KTaO₃ (KT perovskite) structures were prepared by means of chemical solution deposition method using Si(111) with ZnO and MgO buffer layers as a substrate. The influence of reaction atmosphere on reaction pathway and phase composition for both KT powders, and KT thin films has been studied mainly by means of powder diffraction and infrared spectroscopy. When an oxygen flow instead of static air atmosphere has been used the process of pyrolysis in oxygen runs over much narrower temperature interval (200–300 °C), relatively to air atmosphere (200–600 °C) and almost no (in case of powders), or no (in case of thin films) pyrochlore intermediate phase has been detected in comparison with treatment in air, where the pyrochlore phase is stable at temperatures 500–600 °C (powders). KT perovskite phase starts to crystallize at temperatures 50° and 150 °C lower compared to air atmosphere in case of powders and thin films, respectively. Microstructure formed by near-columnar grains and small grains of equiaxed shape was observed in films treated in oxygen and air atmosphere, respectively.     

Coordination of extraframework Li+ cation in the MCM-22 and MCM-36 zeolite: FTIR study of CO adsorbed

Nature and population of Li⁺ cationic sites in MCM-22 zeolite and its pillared form (MCM-36) were investigated by means of adsorption of CO as a probe molecule. CO stretching frequency and adsorption heat were measured by FTIR spectroscopy and adsorption microcalorimetry. Intrazeolitic carbonyl complexes on Li⁺ cations in MCM-22 and MCM-36 are characterized by two main vibrational bands at 2,195 and 2,188 cm^?1. Band at higher wavenumbers is ascribed to carbonyls on Li⁺ ions coordinated only to two oxygen atoms at the intersection of 10-ring channels and interacting with CO molecule by energy around 45 kJ mol^?1. Band at 2,188 cm^?1 was assigned to the carbonyls on Li⁺ cations located on top of 5 or 6-rings on the channel walls and coordinated to three or four oxygen atoms, interacting with CO molecule by energy 33–36 kJ mol^?1. Effect of pillaring and layered form of zeolite on nature and population of Li⁺ cationic sites is also discussed, as well as the formation of dicarbonyl complexes.     

Recognition of chiral anions using calix[4]arene-based ureido receptor in the 1,3-alternate conformation

A new type of calixarene-based receptor designed for the recognition of chiral anions was prepared by the introduction of (S)-2-methylbutan-1-ol moieties into the lower rim of calixarene. The immobilization of calixarene skeleton in the 1,3-alternate conformation enabled the construction of a cavity consisting of preorganised ureido functions and chiral substituents in close proximity. This cavity is capable of chiral discrimination of selected anions as demonstrated on d- and l-phenylalaninates.     

Study of the retention behavior of small polar molecules on different types of stationary phases used in hydrophilic interaction liquid chromatography

The retention behavior of a large group of analytes (35) with varied properties (pK_a and logP) was studied on eight hydrophilic interaction LC columns with different surfaces, stationary phase chemistries, and types of particles. The acetonitrile content (5–95%), buffer concentration (0.5–200 mM), and pH of the mobile phase (3.8 and 6.8) were evaluated for their effects on the retention behavior. The type of stationary phase had a significant impact on the selectivity and retention time of the tested analytes. Completely different selectivity was observed on the aminopropyl stationary phase. In this study, the influence of the buffer concentration was similar for all tested columns, except for the aminopropyl stationary phase. Increasing the buffer concentration led to decreased retention times for the basic compounds and increased retention times for the acidic compounds, while the inverse behavior was observed on the aminopropyl stationary phase. The selectivity of the individual stationary phases was evaluated at pH 3.8 and 6.8. Much lower selectivity differences between the stationary phases were observed at pH 6.8 than pH 3.8. Bare silica stationary phases were used in the comparison of the particles (fused‐core and fully porous particles of 3 and 1.7 μm) and the columns provided by different manufacturers.     

Carbohydrate analysis: From sample preparation to HPLC on different stationary phases coupled with evaporative light‐scattering detection

After 20 years of development, evaporative light‐scattering detection (ELSD) has become the mainstream choice for the detection of various classes of natural products. ELSD continues to grow in popularity as a “quasi‐universal” technique because of the specificity of the detection method, which is based on the scattering of laser light from nonvolatile analyte particles. It represents an attractive alternative compared to other types of detection, such as refractive index detection and/or ultraviolet detection. This review presents issues concerned with the separation of carbohydrates in plant materials by HPLC and ELSD, as well as the advantages and limitations relating to the ELSD method. Additionally, an overview of possible ELSD applications in the analysis of carbohydrates in natural products is presented.     

Simultaneous determination of reduced and oxidized glutathione in tissues by a novel liquid chromatography-mass spectrometry method: application in an inhalation study of Cd nanoparticles

The paper presents the development of an advanced extraction and fast analytical LC MS/MS method for simultaneous analyses of reduced and oxidized glutathione (GSH and GSSG, respectively) in different animal tissues. The simultaneous determination of GSH and GSSG is crucial because the amount and ratio of both GSH and GSSG may be altered in response to oxidative stress, an important mechanism of toxicity. The method uses the derivatization of free thiol groups in GSH. Its performance was demonstrated for less explored tissues (lung, brain, and liver) in mouse. The combined extraction and analytical method has very low variability and good reproducibility, maximum coefficients of variance for within-run and between-run analyses under 8 %, and low limits of quantification; for GSH and GSSG, these were 0.2 nM (0.06 ng/mL) and 10 nM (6 ng/mL), respectively. The performance of the method was further demonstrated in a model experiment addressing changes in GSH and GSSG concentrations in lung of mice exposed to CdO nanoparticles during acute 72 h and chronic 13-week exposures. Inhalation exposure led to increased GSH concentrations in lung. GSSG levels were in general not affected; nonsignificant suppression occurred only after the longer 13-week period of exposure. The developed method for the sensitive detection of both GSH and GSSG in very low tissue mass enables these parameters to be studied in cases where only a little sample is available, i.e. in small organisms or in small amounts of tissue.     

On Gaussian approximation of the strength of Daniels' bundle with brittle Weibull fibers

The paper deals with the classical fiber bundle model with brittle Weibull fibers and equal load sharing. This model is significant for the strength of fibrous materials and composites, and the generally random strength of quasi-brittle structures. The model is also relevant for the analysis of the reliability of various parallel systems (computer components, infrastructure etc.). An improved closed-form Gaussian approximation of the standard deviation of bundle strength is presented and compared with accurate solution calculated by recursive formula proposed by Daniels. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)