Highly Emissive Fused Heterocyclic Alkynylgold(III) Complexes for Multiple Color Emission Spanning from Green to Red for Solution‐Processable Organic Light‐Emitting Devices

A new class of fused heterocyclic tridentate ligand‐containing alkynylgold(III) complexes with tunable emission color has been successfully designed and synthesized. Structural modification of the σ‐donating fused heterocyclic alkynyl ligands, including substituted fluorene, carbazole, and triphenylamine, enables a large spectral shift of about 110 nm (ca. 3310 cm^?1) that covers the green to red region to be realized with the same tridentate ligand‐containing alkynylgold(III) complexes in solid‐state thin films. Interestingly, the energy of the excimeric emission can be controlled by the rational design of the fused heterocyclic alkynyl ligands. Superior solution‐processable organic light‐emitting devices (OLEDs) with high external quantum efficiencies (EQEs) of 12.2, 13.5, 9.3, and 5.2 % were obtained with green, yellow, orange, and red emission. These high EQE values are comparable to those of the vacuum‐deposited OLEDs based on structurally related alkynylgold(III) complexes.     

Tuning of Supramolecular Architectures of l‐Valine‐Containing Dicyanoplatinum(II) 2,2′‐Bipyridine Complexes by Metal–Metal, π–π Stacking,and Hydrogen‐Bonding Interactions

A series of newly synthesized dicyanoplatinum(II) 2,2′‐bipyridine complexes exhibits self‐assembly properties in solution after the incorporation of the l ‐valine amino units appended with various hydrophobic motifs. These l ‐valine‐derived substituents were found to have critical control over the aggregation behaviors of the complexes in the solution state. On one hand, one of the complexes was found to exhibit interesting circularly polarized luminescence (CPL) signals at low temperature due to the formation of chiral spherical aggregates in the temperature‐dependent studies. On the other hand, systematic transformation from less uniform aggregates to well‐defined fibrous and rod‐like structures via Pt???Pt and π–π stacking interactions has also been observed in the mixed‐solvent studies. These changes were monitored by UV/Vis absorption, emission, circular dichroism (CD), and CPL spectroscopies, and morphologies were studied by electron microscopy.     

Synthesis,Electrochemistry, and Photophysical Studies of Ruthenium(II) Polypyridine Complexes with D–π–A–π–D Type Ligands and Their Application Studies as Organic Memories

A new class of ruthenium(II) polypyridine complexes with a series of D–π–A–π–D type (D=donor, A=acceptor) ligands was synthesized and characterized by ¹H NMR spectroscopy, mass spectrometry, and elemental analysis. The photophysical and electrochemical properties of the complexes were also investigated. The newly synthesized ruthenium(II) polypyridine complexes were found to exhibit two intense absorption bands at both high‐energy (λ=333–369 nm) and low‐energy (λ=520–535 nm) regions. They are assigned as intraligand (IL) π→π* transitions of the bipyridine (bpy) and π‐conjugated bpy ligands, and IL charge‐transfer (CT) transitions from the donor to the acceptor moiety with mixing of dπ(Ru^II)→π*(bpy) and dπ(Ru^II)→π*(L) MLCT characters, respectively. In addition, all complexes were demonstrated to exhibit intense red emissions at approximately λ=727–744 nm in degassed dichloromethane at 298 K or in n‐butyronitrile glass at 77 K. Nanosecond transient absorption (TA) spectroscopy has also been carried out, establishing the presence of the charge‐separated state. In order to understand the electrochemical properties of the complexes, cyclic voltammetry has also been performed. Two quasi‐reversible oxidation couples and three quasi‐reversible reduction couples were observed. One of the ruthenium(II) complexes has been utilized in the fabrication of memory devices, in which an ON/OFF current ratio of over 10⁴ was obtained.     

Air‐Stable Spirofluorene‐Containing Ladder‐Type Bis(alkynyl)borane Compounds with Readily Tunable Full Color Emission Properties

A series of air‐stable spiro‐fused ladder‐type boron(III) compounds has been designed, synthesized, and the electrochemistry and photophysical behavior have been characterized. By simply varying the substituents on the pyridine ring and extending the π‐conjugation of the spiro framework, the emission color of these compounds can be easily fine‐tuned spanning the visible spectrum from blue to red. All compounds exhibit a broad and structureless emission band across the entire visible region, assigned as an intramolecular charge‐transfer transition originating from the thiophene of the spiro framework to the pyridine‐borane moieties. In addition, these compounds demonstrate high photoluminescence quantum yields of up to 0.81 in dichloromethane solution and 0.86 in doped thin films. Some of the compounds have also been employed as emissive materials, in which solution‐processed organic light‐emitting devices (OLEDs) with tunable emission colors spanning the visible spectrum from blue, green to red have been realized, demonstrating the potential applications of these boron compounds in OLEDs.     

Capillary liquid chromatographic fingerprint used for discrimination of Zingiber montanum from related species

Fingerprint analysis using capillary liquid chromatography (CLC) has been developed for discrimination of Zingiber montanum (ZM) from related species, for example Z. americans (ZA) and Z. zerumbet (ZZ). By comparing the fingerprint chromatograms of ZM, ZA, and ZZ we could identify ZM samples and discriminate them from ZA and ZZ by using their marker peaks. We also combined CLC fingerprint with multivariate analysis, including principal-component analysis (PCA) and canonical variate analysis (CVA); all three species were discriminated successfully. This result indicates that CLC fingerprint analysis in combination with PCA and CVA can be used for discrimination of ZM samples from samples of related species.

Polyoxyethylene as the stationary phase in ion chromatography

The present article reviews the use of polyethylene glycol (PEG) or polyoxyethylene (POE) as the stationary phase for the separation of inorganic anions in ion chromatography and discusses about the retention mechanisms involved in the separation of anions on the novel stationary phases. PEG permanently coated on a hydrophobic stationary phase retained anions in the partition mode and allowed us to use high-concentration eluents because the retention of anions increased with increasing eluent concentration for most of the eluents. This situation was convenient to determine trace anions contained in seawater samples without any disturbance due to matrices. Chemically bonded POE stationary phases retained not only anions but also cations. Anions were retained in the ion-exchange mode, although POE chains possess no ion exchange sites. The retention behavior suggested that eluent cations could be trapped among multiple POE chains via ion-dipole interaction, and that the trapped cations worked as the anion-exchange sites. Anions could be separated using crown ether, i.e., cyclic POE, as the eluent additive with a hydrophobic stationary phase, where analyte anions were retained via electrostatic interaction with the eluent cation trapped on the crown ether.     

Simultaneous determination of inorganic cations by capillary ion chromatography with a non-suppressed contactless conductivity detector

A non-suppressed capillary ion chromatographic method with a laboratory-made packed cation-exchange column (100 mm × 0.32 mm i.d.) was developed for the separation and simultaneous determination of five common inorganic cations (sodium, ammonium, potassium, magnesium and calcium). Cation exchangers were prepared by the reaction of the hydroxyl group on the surface of diol-group bonded silica gel with 1,3-propanesultone in methanol. Simultaneous separation of these five common inorganic cations were achieved within 17 min using 1 mM methanesulfonic acid and 0.1 mM 15-crown-5 ether in methanol-water (8:2, v/v) as the eluent. The effects of organic solvents and crown ethers in the eluent on the retention of analytes were investigated. The limits of detection (S/N = 3) of the cations were in the range of 18-124 μg/l, the linear correlation coefficients were 0.9991-0.9998, and the RSD values of retention time and peak height were all smaller than 2.1%. The present analytical method was successfully applied to the rapid and direct determination of inorganic cations in samples of river water and commercial drinks, with satisfactory results.     

Dynamical force and imaging characterization of superhydrophobic surfaces

We devised a dangling cantilever optical lever setup with imaging that permits dynamical studies of superhydrophobic surfaces without the effects of gravitational acceleration for better insight into the mechanics. The setup enabled us to ascertain liquid loss and ascribe it to the interaction of liquid that just touched the superhydrophobic surface as it translated at various constant lateral speeds. At lower speeds (20-60 μm/s), the interactions were characterized by a strong initial liquid pin (at up to 0.6 nN force) and depin followed by a series of smaller force pin and depins before sufficient liquid loss led to total liquid detachment from the surface. At higher translation speeds (80-100 μm/s), the interactions were characterized by liquid pinning and depinning processes at a sustained force (around 0.7 nN) in which liquid loss was low enough to engender a much later liquid detachment (beyond 100 s). A linear reduction of the receding contact angle with time, but not with the advancing contact angle, was found up to the point of first liquid depinning. This suggested a stronger role played by the receding contact line in establishing liquid adherence to the superhydrophobic surface. The detachment process from the surface was also characterized by a liquid bridge driven to rupture by way of liquid being conveyed away from the bridge.     

Sample enrichment by using monolithic precolumns in microcolumn liquid chromatography

An on-line sample enrichment system was designed using monolithic precolumns in microcolumn LC. The monolithic ODS capillary columns were prepared via in situ sol-gel processes. The enrichment efficiency of the monolithic columns was tested by using phthalates as the analytes. The relative standard deviations (n = 6) for the retention time, peak area and peak height were between 0.4 and 1.2%, 0.9 and 5.5% and 0.4 and 3.9%, respectively. The system was linear (R2 > 0.99) within the working sample concentration and sample volume ranges. Comparing to 0.2 microl injection with a typical sample injector, the theoretical plate number of a same separation column was increased by 3-6-fold when the precolumn unit was used for sample injection. The recoveries of the analytes were between 88 and 120%, and the sample volume that could be injected into the system was increased up to 5000-fold. The limits of detection were improved by more than 2000-fold and were between 0.21 and 0.87 ng ml(-1) even with a UV absorbance detector. This system was applied to the determination of phthalates contained in laboratory distilled water and tap water samples.     

REASSESSMENT OF THE DIFFERENTIAL EFFECTS OF ULTRAVIOLET AND IONIZING RADIATION ON HIV PROMOTER: THE USE OF CELL SURVIVAL AS THE BASIS FOR COMPARISONS

Abstract: Effects of different radiation treatments on the human immunodeficiency virus-1 (HIV) promoter were reassessed for exposures comparable to those encountered in clinical or cosmetic practice, using survival of the host cell as a basis for comparisons. The exposures were performed with two ultraviolet radiation sources commonly used as medical or cosmetic devices (UVASUN 2000 and FS20 lamps), a germicidal (G15T8) lamp and an X-ray machine. The UVC component of the FS20 lamp was filtered out. The emission spectra of the lamps were determined. The characteristics of these sources allowed us to discriminate among effects of UVA1 (340–400 nm), UVB + UVA2 (280–340 nm) and UVC (254 nm) radiations. Effects of irradiation were ascertained using cultures of HeLa cells stably transfected with the HIV promoter linked to a reporter—chloramphenicol acetyl transferase—gene. The exposures used caused at least two logs of cell killing. In this cytotoxicity range, UVA1 or X radiations had no effect on the HIV promoter, whereas UVB + UVA2 or UVC radiations activated the HIV promoter in a fluence-dependent manner. Survivals following exposure to UVB + UVA2 or UVC radiation were (1) at the lowest measurable HIV promoter activation, 30 and 20%, respectively, (2) at one-half maximal activation, 6 and 3%, respectively and (3) at the maximal activation, 0.5 and 0.2%, respectively. The results suggest that, among the radiations studied, UVB is the most important modality from the viewpoint of its potential effects on HIV-infected individuals, since (1) UVA1 or X radiations have no effects on the HIV promoter, (2) human exposure to UVC radiation is infrequent and (3) human UVB exposure is very common.