Control of aqueous droplets using magnetic and electrostatic forces

Basic control operations were successfully performed on an aqueous droplet using both magnetic and electrostatic forces. In our droplet-based microfluidics, magnetic beads were incorporated in an aqueous droplet as a force mediator. This report describes droplet anchoring and separation of the beads from the droplet using a combination of magnetic and electrostatic forces. When an aqueous droplet is placed in an oil-filled reservoir, the droplet sinks to the bottom, under which an electrode had been placed. The droplet was adsorbed (or anchored) to the bottom surface on the electrode when a DC voltage was applied to the electrode. The magnetic beads were removed with magnetic force after the droplet had been anchored. Surfactant addition into droplet solution was very effective for the elimination of electric charge, which resulted in the stable adsorption of a droplet to hydrophobic substrate under an applied voltage of DC 0.5-3 kV. In a sequential process, small volume of aqueous liquid was successfully transferred using both magnetic and electrostatic forces.     

Synthesis of the entire carbon framework of the kedarcidin chromophore aglycon

In advanced studies directed toward the total synthesis of the kedarcidin chromophore, we have successfully achieved the late-stage installation of the nine-membered diyne ring in the presence of the highly functionalised ansamacrocyclic bridge.     

"Pocket dendrimers" as nanoscale receptors for bimolecular guest accommodation

A new series of dendrimer receptors was prepared by combining a (tetraphenylporphinato)zinc(II) core and benzyl ether type dendritic substituents. Since one direction of the (tetraphenylporphinato)zinc(II) was not substituted by a dendritic residue, the resulting unsymmetrical dendrimers have "pockets" available for access of external substrates. Molecular modeling, NMR measurements, and zinc-coordination experiments revealed that the third-generation dendrimer of this type exhibited characteristic inclusion of coordinative pyridine guests. When diamidopyridine moiety was introduced into the dendrimer pocket, a thymine derivative was bound through complementary hydrogen bonding. Two different kinds of substrates, pyridine and thymine derivatives, were simultaneously accommodated in the nanoscale pocket and bimolecular guest accommodation was realized with the designed dendrimer receptor.     

Linear metal-metal-bonded tetranuclear M-Mo-Mo-M complexes (M = Ir and Rh): oxidative metal-metal bond formation in a tetrametallic system and 1,4-addition reaction of alkyl halides

Reaction of Mo2(pyphos)4 (1) with [MCl(CO)2]2 (M = Ir and Rh) afforded linear tetranuclear complexes of a formula Mo2M2(CO)2(Cl)2(pyphos)4 (2, M = Ir; 3, M = Rh). X-ray diffraction studies confirmed that two "MCl(CO)" fragments are introduced into both axial sites of the Mo2 core in 1 and coordinated by two PPh2 groups in a trans fashion, thereby forming a square-planar geometry around each M(I) metal. Treatment of 2 and 3 with an excess amount of tBuNC and XylNC induced dissociation of the carbonyl and chloride ligands to yield the corresponding dicationic complexes [Mo2M2(pyphos)4(tBuNC)4](Cl)2 (5a, M = Ir; 6a, M = Rh) and [Mo2M2(pyphos)4(XylNC)4](Cl)2 (7, M = Ir; 8, M = Rh). Their molecular structures were characterized by spectroscopic data as well as X-ray diffraction studies of BPh4 derivatives [Mo2M2(pyphos)4(tBuNC)4](BPh4)2 (5b, M = Ir; 6c, M = Rh), which confirmed that there is no direct sigma-bonding interaction between the M(I) atom and the Mo2 core. The M(I) atom in 5 and 6 can be oxidized by either 2 equiv of [Cp2Fe][PF6] or an equimolar amount of I2 to afford Mo(II)2M(II)2 complexes, [Mo2M2(X)2(tBuNC)4(pyphos)4]2+ in which two Mo-M(II) single bonds are formed and the bond order of the Mo-Mo moiety has been decreased to three. The Ir(I) complex 5a reacted not only with methyl iodide but also with dichloromethane to afford the 1,4-oxidative addition products [Mo2Ir2(CH3)(I)(tBuNC)4(pyphos)4](Cl)2 (13) and [Mo2Ir2(CH2Cl)(Cl)(tBuNC)4(pyphos)4](Cl)2 (15), respectively, although the corresponding reactions using the Rh(I) analogue 6 did not proceed. Kinetic analysis of the reaction with CH3I suggested that the 1,4-oxidative addition to the Ir(I) complex occurs in an SN2 reaction mechanism.     

Determination of vanillin and related flavor compounds in cocoa drink by capillary electrophoresis

In the first part of this study, the stability of five terpenes (alpha-pinene, limonene, camphor, citronellol, and carvacrol) under subcritical water conditions was investigated. The stability studies were carried out at four different temperatures (100, 150, 200, and 250 degrees C) with two different heating times (30 and 300 min). When water temperature was increased, the degradation of terpenes became more serious. Prolonged exposure time to each heating temperature also caused decreased terpene stability. The terpene recoveries were determined by conducting subcritical water extraction of sand spiked with terpenes. The recoveries are typically around 70 to 80% for extractions at 100 degrees C. Terpene recoveries were decreased with increasing water temperature due to poorer stability of terpenes. After the degradation and recovery studies, basil and oregano leaves were extracted using water at both 100 and 150 degrees C. The concentrations of each individual terpene in the water extract generally ranged from trace quantity to 65 microg terpene/g herb. However, the concentration of carvacrol in the oregano-water extract at 150 degrees C was found to be as high as 4270 microg carvacrol/g oregano.     

Effect of Substrates on the Addition Polymerization of 1,4-Benzenedithiol to 1,4-Diethynylbenzene in the Solid State and the Electronic Properties of the Resulting Polymer

The effect of substrates on the addition polymerization of 1,4-benzenedithiol (BDT) to 1,4-diethynylbenzene (DEB) in the solid state and the electronic properties of the polymers obtained were studied. As the substrate polymer sheets, for instance, PET (poly (ethylene terephthalate)) sheet, ON-6 (oriented nylon-6) sheet and so on having surface free energies Γ_s from 27.4 to 55.0 erg/cm² were used. At the monomer sublimation temperature of 60°C, the S wt% (sulfur content) and the cis content of the polymers were not affected by the kind of polymer sheets. However, the molecular weights, M¯_n of the polymers polymerized on the polymer sheets were 13,000–30,000, and the values were several times higher than the molecular weight of the polymers polymerized on glass plate. On the other hand, at the sublimation temperature of 82°C, the cis content of the polymers apparently increased with decreasing d-value of the polymer sheets. On X-ray diffraction patterns of monomer mixtures sublimed onto polymer sheets, the diffraction intensities and the diffraction peak positions were concerned with the d-value of the polymer sheets. Using polymer sheets, the diffraction peak intensities of the monomer mixture at 7.73 and 7.58 Å decreased compared with those on glass plate. In contrast, the peak at 3.65 Å, which is a negligibly small peak on glass plate, obviously increased. However, as the d-value of the polymer sheets (PET 3.45 Å; OPP (oriented polypropylene) 5.2 Å) increased, the diffraction peak intensities at 7.73 Å and 7.58 Å gradually increased and the diffraction peak intensity at 3.65 Å gradually decreased. The parallel electrical conductivities (σ_||) toward the layered structural polymer on PET, ON-6 and glass plate under air atmosphere were 10⁻⁷, 10⁻⁹ and 10⁻¹¹ S/cm, respectively. Under a reduced pressure of 10⁻³ mmHg, the σ_|| values of each polymer lowered by one or two orders of magnitude. On the other hand, the σ_|| values of the nonlayered structural polymers under air atmosphere were about 10⁻¹¹–10⁻¹² S/cm and were independent of the substrates. Even under a reduced pressure of 10⁻³ mmHg, the σ_|| values hardly changed and remained at 10⁻¹¹–10⁻¹² S/cm. The vertical electrical conductivities (σ_⟂) of the layered structural polymers on conductive PET sheet coated by indium tin oxide or NESA glass plates were independent of the substrates and were 10⁻¹⁴ S/cm under air atmosphere. The σ_⟂ values of the nonlayered structural polymers also exhibited the same values. The reversible change of the amount of the layered structural polymer on PET sheet was also caused by irradiation of the photo-light which is the effective wavelength for the phase transition of the polymers mounted on glass plate. The σ_|| value of the layered structural polymer on ON-6 sheet reversibly changed with the amount of the layer structure controlled by the photo-light, that is, the σ_|| increased up to about one order of magnitude by the photo-light at 545.6 nm. On the other hand, the _|| decreased to about one order of magnitude by the photo-light at 539.6 nm. Anisotropic conductivity with respect to σ_|| and σ_⟂, and oxygen doping mechanisms were discussed in relation to the layer structure of polymers. © 1997 John Wiley & Sons, Ltd.     

Rotational spectrum of the Ar–dimethyl sulfide complex

The rotational spectra of three isotopomers of the Ar–dimethyl sulfide (DMS) complex – normal, ³⁴S, and ¹³C species – were measured in the frequency region from 3.7 up to 24.1 GHz by Fourier transform microwave spectroscopy. The normal species yielded 43 a-type and 79 c-type transitions. No Ar tunneling splitting was observed, while many transitions were split by the internal rotation of the two methyl tops of the DMS unit. In cases where the K-type splitting was close to that due to methyl internal-rotation, several forbidden transitions were observed that followed b-type selection rules. All of the observed transition frequencies were analyzed simultaneously using a phenomenological Hamiltonian also used in previously published work describing the Ar–dimethyl ether (DME) and Ne–DME complexes. The rotational and centrifugal distortion constants and the potential barrier height to methyl-top internal rotation, V₃, were determined. The rotational constants were consistent with an Ar–DMS center of mass (cm) distance of 3.796 (3) Å and a S–cm–Ar angle of 104.8 (2)°. The V₃ potential barrier obtained, 736.17 (32) cm⁻¹, was 97.8% of the DMS monomer barrier. By assuming a Lennard–Jones-type potential, the dissociation energy was estimated to be 2.4 kJ mol⁻¹, which was close to the value for Ar–DME, 2.5 kJ mol⁻¹.     

Dichloro­oxo(quinoline‐8‐thiolato‐κ2N,S)(triphenyl­phosphine oxide‐κO)rhenium(V) acetone solvate

The complex mol­ecule in the title compound, [Re(C₉H₆NS)Cl₂O(C₁₈H₁₅OP)]·C₃H₆O, has distorted octa­hedral geometry. The Re=O bond occupies the position trans to the triphenyl­phosphine oxide O atom. The Re—Cl bond trans to the thiol­ate S atom is longer than that trans to the quinoline N atom, implying a stronger trans influence of the S atom. Intra‐ and inter­molecular π–π inter­actions are also observed between the π rings in the complex.     

Synthesis and Reactivity of Six‐Membered Oxa‐Nickelacycles: A Ring‐Opening Reaction of Cyclopropyl Ketones

Cyclopropanecarboxaldehyde ( 1 a ), cyclopropyl methyl ketone ( 1 b ), and cyclopropyl phenyl ketone ( 1 c ) were reacted with [Ni(cod)₂] (cod=1,5‐cyclooctadiene) and PBu₃ at 100 °C to give η²‐enonenickel complexes ( 2 a – c ). In the presence of PCy₃ (Cy=cyclohexyl), 1 a and 1 b reacted with [Ni(cod)₂] to give the corresponding μ‐η²:η¹‐enonenickel complexes ( 3 a , 3 b ). However, the reaction of 1 c under the same reaction conditions gave a mixture of 3 c and cyclopentane derivatives ( 4 c , 4 c′ ), that is, a [3+2] cycloaddition product of 1 c with (E)‐1‐phenylbut‐2‐en‐1‐one, an isomer of 1 c . In the presence of a catalytic amount of [Ni(cod)₂] and PCy₃, [3+2] homo‐cycloaddition proceeded to give a mixture of 4 c (76 %) and 4 c′ (17 %). At room temperature, a possible intermediate, 6 c , was observed and isolated by reprecipitation at ?20 °C. In the presence of 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene (IPr), both 1 a and 1 c rapidly underwent oxidative addition to nickel(0) to give the corresponding six‐membered oxa‐nickelacycles ( 6 ai , 6 ci ). On the other hand, 1 b reacted with nickel(0) to give the corresponding μ‐η²:η¹‐enonenickel complex ( 3 bi ). The molecular structures of 6 ai and 6 ci were confirmed by X‐ray crystallography. The molecular structure of 6 ai shows a dimeric η¹‐nickelenolate structure. However, the molecular structure of 6 ci shows a monomeric η¹‐nickelenolate structure, and the nickel(II) 14‐electron center is regarded as having “an unusual T‐shaped planar” coordination geometry. The insertion of enones into monomeric η¹‐nickelenolate complexes 6 c and 6 ci occurred at room temperature to generate η³‐oxa‐allylnickel complexes ( 8 , 9 ), whereas insertion into dimeric η¹‐nickelenolate complex 6 ai did not take place. The diastereoselectivity of the insertion of an enone into 6 c having PCy₃ as a ligand differs from that into 6 ci having IPr as a ligand. In addition, the stereochemistry of η³‐oxa‐allylnickel complexes having IPr as a ligand is retained during reductive elimination to yield the corresponding [3+2] cycloaddition product, which is consistent with the diastereoselectivity observed in Ni⁰/IPr‐catalyzed [3+2] cycloaddition reactions of cyclopropyl ketones with enones. In contrast, reductive elimination from the η³‐oxa‐allylnickel having PCy₃ as a ligand proceeds with inversion of stereochemistry. This is probably due to rapid isomerization between syn and anti isomers prior to reductive elimination.     

Efficient construction of the hexacyclic ring core of palau'amine: the pKa concept for proceeding with unfavorable equilibrium reactions

Palau''amine has received a great deal of attention as an attractive synthetic target due to its intriguing molecular architecture and significant immunosuppressive activity, and we achieved its total synthesis in 2015. However, the synthesized palau''amine has not been readily applicable to the mechanistic study of immunosuppressive activity, because it requires 45 longest linear steps from a commercially available compound. Here, we report the short-step construction of the ABCDEF hexacyclic ring core of palau''amine. The construction of the CDE tricyclic ring core in a single step is achieved by our pK_a concept for proceeding with unfavorable equilibrium reactions, and a palau''amine analog without the aminomethyl and chloride groups is synthesized in 20 longest linear steps from the same starting material. The palau''amine analog is confirmed to retain the immunosuppressive activity. The present synthetic approach for a palau''amine analog has the potential for use in the development of palau''amine probes for mechanistic elucidation.

A palau''amine analog (2) was synthesized from 2-cyclopentenone in 20 steps. The construction of the CDE tricyclic ring core in a single step is achieved by our pK_a concept for proceeding with the unfavorable equilibrium reactions.