Fluoride-catalyzed hydroalkoxylation of hexafluoropropene with 2,2,2-trifluoroethanol

Trifluoroethoxylation of hexafluoropropene with 2,2,2-trifluoroethanol (TFE) were conducted using an alkali metal fluoride catalyst to produce CF₃CHFCF₂OCH₂CF₃. KF exhibited the highest yield and selectivity of CF₃CHFCF₂OCH₂CF₃, whereas LiF and NaF were inactive for the trifluoroethoxylation reaction. The same reaction also proceeded well in the presence of RbF or CsF, but yielded large amounts of olefinic and high molecular weight side products, implying that the size of alkali metal cation or the degree of MF dissociation plays an important role in determining the activity and the product composition. FT-IR and NMR experiments revealed that CsF interacts with TFE more strongly than KF through a hydrogen bonding. The experimental and spectroscopic results suggest that the degree of MF dissociation should be in the medium range for the selective production of CF₃CHFCF₂OCH₂CF₃ in high yield and selectivity.     

Angular intensity distribution of a molecular oxygen beam scattered from a graphite surface

The scattering of the oxygen molecule from a graphite surface has been studied using a molecular beam scattering technique. The angular intensity distributions of scattered oxygen molecules were measured at incident energies from 291 to 614 meV with surface temperatures from 150 to 500 K. Every observed distribution has a single peak at a larger final angle than the specular angle of 45° which indicates that the normal component of the translation energy of the oxygen molecule is lost by the collision with the graphite surface. The amount of the energy loss by the collision has been roughly estimated as about 30-41% based on the assumption of the tangential momentum conservation during the collision. The distributions have also been analyzed with two theoretical models, the hard cubes model and the smooth surface model. These results indicate that the scattering is dominated by a single collision event of the particle with a flat surface having a large effective mass. The derived effective mass of the graphite surface for the incoming oxygen is 9-12 times heavier than that of a single carbon atom, suggesting a large cooperative motion of the carbon atoms in the topmost graphene layer.     

KR-31543 reduces the production of proinflammatory molecules in human endothelial cells and monocytes and attenuates atherosclerosis in mouse model

KR-31543, (2S, 3R, 4S)-6-amino-4-[N-(4-chlorophenyl)-N-(2-methyl-2H-tetrazol-5-ylmethyl) amino]-3,4-dihydro-2-dimethyoxymethyl-3-hydroxy-2-methyl-2H-1-benz opyran is a new neuroprotective agent for ischemia-reperfusion damage. It has also been reported that KR-31543 has protective effects on lipid peroxidation and H₂O₂-induced reactive oxygen species production. In this study, we investigated the anti-inflammatory and anti-atherogenic properties of KR-31543. We observed that KR-31543 treatment reduced the production of MCP-1, IL-8, and VCAM-1 in HUVECs, and of MCP-1 and IL-6 in THP-1 human monocytes. We also examined the effect of KR-31543 on monocytes migration in vitro. KR-31543 treatment effectively reduced the migration of THP-1 human monocytes to the HUVEC monolayer in a dose-dependent manner. We next examined the effects of this compound on atherogenesis in LDL receptor deficient (Ldlr^-/-) mice. After 10 weeks of western diet, the formation of atherosclerotic lesion in aorta was reduced in the KR-31543-treated group compared to the control group. The accumulation of macrophages in lesion was also reduced in KR-31543 treated group. However, the plasma levels of total cholesterol, HDL, LDL, and triglyceride were not affected by KR-31543 treatment. Taken together, these results show that KR-31543 has anti-inflammatory properties on human monocytes and endothelial cells, and inhibits fatty streak lesion formation in mouse model of atherosclerosis, suggesting the potential of KR-31543 for the treatment for atherosclerosis.     

Plastic enzyme-linked immunosorbent assays (ELISA)-on-a-chip biosensor for botulinum neurotoxin A

A plastic ELISA-on-a-chip (EOC) employing the concept of cross-flow immuno-chromatographic analysis was applied to the measurement of botulinum neurotoxin A (BoNT/A) as agent for bio-terrorism. Two monoclonal antibodies specific to the heavy chain of the toxin were raised and identified to form sandwich binding complexes as the pair with the analyte. For the construction of an immuno-strip, one was utilized as the capture antibody immobilized onto nitrocellulose membrane and the other as the detection coupled to an enzyme, horseradish peroxidase. The two plates of EOC used in this study were fabricated by injection molding of polycarbonate to improve the reproducibility of manufacture and, after inclusion of the immuno-strip, bonded using a UV-sensitive adhesive. Under optimal conditions of analysis, the chip produced a color signal in proportion to the analyte dose and the signal was quantified using a detector equipped with a digital camera. From the dose-response curve, the detection limit of BoNT/A was 2.0 ng mL⁻¹, approximately five times more sensitive than a commercial-version detection kit employing colloidal gold tracer.     

Anisotropic thermal expansion behavior of thin films of polymethylsilsesquioxane, a spin-on-glass dielectric for high-performance integrated circuits

Thin films of poly(methylsilsesquioxane) (PMSSQ) are candidates for use as interdielectric layers in advanced semiconductor devices with multilayer structures. We prepared thin films of PMSSQ with thicknesses in the range 25.0-1151.0 nm by spin-casting its soluble precursor onto Si and GaAs substrates with native oxide layers and then drying and curing the films under a nitrogen atmosphere at temperatures in the range 250-400 degrees C. The out-of-plane thermal expansion coefficient alpha(perpendicular) of each film was measured over the temperature range 25-200 degrees C using spectroscopic ellipsometry and synchrotron X-ray reflectivity, while the in-plane thermal expansion coefficient alpha(parallel) of each film was determined over the temperature range 25-400 degrees C by residual stress analysis. PMSSQ films cured at higher temperatures exhibited reduced thermal expansion, which is attributed to the denser molecular packing and higher degree of cross-linking that arises at higher temperatures. Surprisingly however, all the PMSSQ films were found to exhibit very strong anisotropic thermal expansion; alpha(perpendicular) and alpha(parallel) of the films were in the ranges 140-329 ppm/ degrees C and 12-29 ppm/ degrees C respectively, depending on the curing temperature. This is the first time that cured PMSSQ thin films have been shown to exhibit anisotropic thermal expansion behavior. This anisotropic thermal expansion of the PMSSQ thin films might be due to the anisotropy of cross-link density in the films, which arises because of a combination of factors: the preferential orientation of methyl groups toward the upper film surface and the preferential network formation in the film plane that occurs during curing of the confined film. In addition, the film electron densities were determined using synchrotron X-ray reflectivity measurements and the film biaxial moduli were obtained using residual stress analysis.     

Fluorometric assay protocol for protease-catalyzed transesterification reactions in organic solvents

A flourometric assay protocol for a subtilisin-catalyzed transesterification reaction in n-hexane has been developed. The method makes use of a Michael acceptor that forms a fluorescent adduct with thiophenol, one of the products generated in the transesterification reaction. The method may be employed for screening a biocatalyst useful for transesterification reactions in organic solvents and for optimizing the transesterification reaction conditions.     

Simvastatin inhibits induction of matrix metalloproteinase-9 in rat alveolar macrophages exposed to cigarette smoke extract

Matrix metalloproteinase-9 (MMP-9) may play an important role in emphysematous change in chronic obstructive pulmonary disease (COPD), one of the leading causes of mortality and morbidity worldwide. We previously reported that simvastatin, an inhibitor of HMG-CoA reductase, attenuates emphysematous change and MMP-9 induction in the lungs of rats exposed to cigarette smoke. However, it remained uncertain how cigarette smoke induced MMP-9 and how simvastatin inhibited cigarette smoke-induced MMP-9 expression in alveolar macrophages (AMs), a major source of MMP-9 in the lungs of COPD patients. Presently, we examined the related signaling for MMP-9 induction and the inhibitory mechanism of simvastatin on MMP-9 induction in AMs exposed to cigarette smoke extract (CSE). In isolated rat AMs, CSE induced MMP-9 expression and phosphorylation of ERK and Akt. A chemical inhibitor of MEK1/2 or PI3K reduced phosphorylation of ERK or Akt, respectively, and also inhibited CSE-mediated MMP-9 induction. Simvastatin reduced CSE-mediated MMP-9 induction, and simvastatin-mediated inhibition was reversed by farnesyl pyrophosphate (FPP) or geranylgeranyl pyrophosphate (GGPP). Similar to simvastatin, inhibition of FPP transferase or GGPP transferase suppressed CSE-mediated MMP-9 induction. Simvastatin attenuated CSE-mediated activation of RAS and phosphorylation of ERK, Akt, p65, IκB, and nuclear AP-1 or NF-κB activity. Taken together, these results suggest that simvastatin may inhibit CSE-mediated MMP-9 induction, primarily by blocking prenylation of RAS in the signaling pathways, in which Raf-MEK-ERK, PI3K/Akt, AP-1, and IκB-NF-κB are involved.     

The effects of sampling materials selection in the collection of reduced sulfur compounds in air

In this study, the analytical bias in the measurements of reduced sulfur compounds (RSC) was investigated in terms of sorptive loss caused by the materials selected for the sample introduction. For the purpose of this study, three vacuum samplers made in the combination of different vacuuming efficiencies (e.g., rapid versus slow sampling) and different materials (i.e., Teflon versus stainless steel (SS)) were tested to evaluate the sampling recovery rate (RR) for five RSCs: H₂S, CH₃SH, DMS, CS₂ and DMDS. To make a parallel comparison of RR, the RSC standard samples contained in one bag were transferred to another bag using each sampling system. Their relative contents between, before, and after the transfer were then evaluated between different samplers to assess the sampling bias caused by the interaction between RSC and the sampling material. In the case of the most reactive compound, H₂S, the sampling loss from the SS inlet line amounted to as high as 45%, while that for the Teflon counterpart was almost insignificant. When the sampling time was arbitrarily elongated (i.e., use of a slow sampler), the sampling loss rate of the SS inlet sampler became more significant with the RR values dropping down from 55 to 70%, across different RSCs. The overall results of our comparative study indicate that the sampling system for the reactive gaseous compounds should be checked for the material feasibility to guarantee sufficient analytical reliability.