Influences of Heating Condition and Substrate-Surface Roughness on the Characteristics of Sol-Gel-Derived Hydroxyapatite Coatings

A prepared transparent HA solution was coated on Ti6Al4V substrates by a spin-coating technique. The crystallization of the sol-gel-derived HA coated on the metallic substrates could be done at relatively low firing temperatures (as low as 600°C). The characteristics of the HA-coated layer were dependent on the surface roughness of substrates and heating conditions such as firing temperature, holding time, heating rate, and atmosphere. The heat treatment at a slow heating rate (<2°C/min.) and a long heating time (>10 hrs) at 600°C in air produced the uniform surface and improved the crystallinity. The HA layer coated on 20 m grit-blasted substates was more uniform and had fever cracks after firing, compared with that coated on 100 m grit-blasted rougher substrates.     

Semialactone, isofouquierone peroxide and fouquierone, three new dammarane triterpenes from Rhus javanica

Three new dammarane triterpenes and semialactic acid were isolated from the stem bark of Rhus javanica. The structures of these triterpenes, named semialactone, isofouquierone peroxide and fouquierone, were elucidated by 2D-NMR analysis (HMQC, 1H-1H COSY and HMBC), and the 13C-NMR data of semialatic acid is revised.     

Modular fluorescence sensors for saccharides

Modular and modular polymer supported fluorescence photoinduced electron transfer (PET) sensors 2 and 3 with two boronic acid receptor units, a pyren-1-yl fluorophore, and hexamethylene linker show selective saccharide binding in aqueous methanolic solution at pH 8.21.     

Biogenic synthesis from <Emphasis Type="Italic">Prunus</Emphasis> × <Emphasis Type="Italic">yedoensis</Emphasis> leaf extract,characterization, and photocatalytic and antibacterial activity of TiO<Subscript>2</Subscript> nanoparticles

Green synthesis of TiO₂ nanoparticles (NPs) from Prunus × yedoensis leaf extract (PYLE), and their application for removal of phosphate and their antibacterial activity, were studied for the first time. NPs were obtained using a green chemistry approach from 0.1 M TiO₂ and PYLE at ratio of 1:1 (v/w). Initial confirmation of production of TiO₂ NPs was provided by a color change from white to light yellow, then calcination was performed at 500 °C for 1 h. The TiO₂ NPs were characterized using various analytical techniques such as ultraviolet–visible (UV–Vis) spectroscopy, X-ray diffraction analysis, Fourier-transform infrared spectroscopy, Raman spectroscopy, UV–Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. The results indicated that the optimal amount of TiO₂ NPs for removal of phosphate was 10 mg/l (10 ppm) with duration of 25 min. Furthermore, the antibacterial activity of TiO₂ NPs was also investigated using two different bacteria (Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli) in aqueous medium. The results revealed highly efficient sunlight-driven photocatalytic and antibacterial activity of TiO₂ NPs.     

Spontaneous reductive decomposition behavior of hydrogen permanganate in water for chemical decontamination of nuclear power plants

The spontaneous reductive decomposition behavior of HMnO₄ in water as a function of the initial HMnO₄ concentration and reaction temperature was investigated. The decomposition of HMnO₄ was fast in the early stage of the reaction and thereafter slowed down significantly, regardless of the initial HMnO₄ concentration. The loss of HMnO₄ by spontaneous reductive decomposition increased with increasing reaction temperature. Based on the experimental results and the classical nucleation theory, a mathematical model was developed using a combination of two first-order reactions representing the nucleation and crystal growth of MnO₂ to predict the spontaneous reductive decomposition behavior of HMnO₄.     

TEMPO-Assisted Free Radical-Initiated Peptide Sequencing Mass Spectrometry (FRIPS MS) in Q-TOF and Orbitrap Mass Spectrometers: Single-Step Peptide Backbone Dissociations in Positive Ion Mode

The present study demonstrates that one-step peptide backbone fragmentations can be achieved using the TEMPO [2-(2,2,6,6-tetramethyl piperidine-1-oxyl)]-assisted free radical-initiated peptide sequencing (FRIPS) mass spectrometry in a hybrid quadrupole time-of-flight (Q-TOF) mass spectrometer and a Q-Exactive Orbitrap instrument in positive ion mode, in contrast to two-step peptide fragmentation in an ion-trap mass spectrometer (reference Anal. Chem. 85, 7044–7051 (30)). In the hybrid Q-TOF and Q-Exactive instruments, higher collisional energies can be applied to the target peptides, compared with the low collisional energies applied by the ion-trap instrument. The higher energy deposition and the additional multiple collisions in the collision cell in both instruments appear to result in one-step peptide backbone dissociations in positive ion mode. This new finding clearly demonstrates that the TEMPO-assisted FRIPS approach is a very useful tool in peptide mass spectrometry research.

Open image in new window

Graphical Abstract ?

     

Full automatic synthesis of [<Superscript>18</Superscript>F]THK-5351 for tau protein PET imaging in Alzheimer’s disease patients: 1 year experience

[¹⁸F]THK-5351, a new candidate for tau protein imaging, is based on an aryl quinoline structure. We report the full automatic synthesis using disposable cassettes under pH controlled [¹⁸F]fluorination. After the trapping of 88.5 ± 21.9 GBq of [¹⁸F]fluoride, it was eluted with potassium methansulfonate (KOMs) (pH 7.8)/K₂₂₂. After drying, 3 mg of the precursor was added to 1 mL DMSO and subjected to [¹⁸F]fluorination at 110 °C for 10 min. After hydrolysis, the final product was purified by HPLC. The overall radiochemical yield was 31.9 ± 11.1% (n = 22), satisfying all quality control criteria. It was stable for up to 6 h with high radiochemical purity as 99.8 ± 0.5%.     

The poset structures admitting the extended binary Golay code to be a perfect code

Brualdi et al. [Codes with a poset metric, Discrete Math. 147 (1995) 57-72] introduced the concept of poset codes, and gave an example of poset structure which admits the extended binary Golay code to be a 4-error-correcting perfect P-code. In this paper we classify all of the poset structures which admit the extended binary Golay code to be a 4-error-correcting perfect P-code, and show that there are no posets which admit the extended binary Golay code to be a 5-error-correcting perfect P-code.