Features of light attenuation in crystals under violation of the Bouguer law

A computer simulation and measurements of the light transmittance of germanium and paratellurite crystals of different thickness were used to show that, at scattering probabilities of photons comparable to their absorption probabilities, the standard methods for calculating light extinction coefficients on the basis of the Bouguer law lead to rough errors in estimation of the optical quality of a material.     

Influence of the loading path on the strength of fiber-reinforced composites subjected to transverse compression and shear

The influence of the loading path on the failure locus of a composite lamina subjected to transverse compression and out-of-plane shear is analyzed through computational micromechanics. This is carried out using the finite element simulation of a representative volume element of the microstructure, which takes into account explicitly fiber and matrix spatial distribution within the lamina. In addition, the actual failure mechanisms (plastic deformation of the matrix and interface decohesion) are included in the simulations through the corresponding constitutive models. Two different interface strength values were chosen to explore the limiting cases of composites with strong or weak interfaces. It was found that failure locus was independent of the loading path for the three cases analyzed (pseudo-radial, compression followed by shear and shear followed by compression) in the composites with strong and weak interfaces. This result was attributed to the fact that the dominant failure mechanism in each material was the same in transverse compression and in shear. Failure is also controlled by the same mechanisms under a combination of both stresses and the failure locus depended mainly on the magnitude of the stresses that trigger fracture rather than in the loading path to reach the critical condition.     

Fundamentals of physics of fluid flow reconsidered

Recently, two significant defects of the state-of-the-art of theoretical fluid mechanics have been evidenced, namely the ambiguity of the Navier Stokes equations with respect to the viscous stress tensor, and the inconsistency of the Reynolds stress approach with the symmetry of the inertial tensor. Therefore, by means of two classical topics of fluid mechanics, namely the universal velocity profile and the laminar boundary layer, the physics of fluid flow are scrutinized. The validity of the so obtained results is tested at the example of an exact solution of the Navier Stokes equations, namely the diffusion of the circulation of an eddy.     

Reactions of 2,2-disubstituted 1,1-dicyanoethenes with β-dimethylaminoacrolein aminal and 3-dimethylamino-1,1,3-trimethoxypropane

A reaction of 2,2-disubstituted 1,1-dicyanoethenes with β-dimethylaminoacrolein aminal and 3-dimethylamino-1,1,3-trimethoxypropane leads to substituted 6,6-dicyano-1-dimethyl-aminohexatrienes and an organic salt containing 1,1,9,9-tetracyano-2,8-diphenylnona-2,4,6,8-tetraenide as the anion and (dimethylaminopropenylidene)dimethylammonium as the cation, on the basis of which new cation-anionic polymethine dyes were obtained. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1639–1643, August, 2008.     

Metal complexes of 2-hetarylindandiones-1,3

The chelate and molecular complexes of 2-(2-benzazolyl, perimidyl)-indandiones-1,3 were synthesized for the first time. The structures of the ligands (tautomeric forms) and complex compounds were determined from the X-ray diffraction, ¹H, ¹³C NMR, and IR data and the quantum-chemical calculations (RHF SCF in 6-31 G** basis).     

Geometric modeling of homoepitaxial CVD diamond growth: I. The {1 0 0}{1 1 1}{1 1 0}{1 1 3} system

Plasma-assisted CVD homoepitaxial diamond growth is a process that must satisfy many stringent requirements to meet industrial applications, particularly in high-power electronics. Purity control and crystalline quality of the obtained samples are of paramount importance and their optimization is a subject of active research. In the process of such studies, we have obtained high purity CVD diamond monocrystals with unusual morphologies, namely with apparent {1 1 3} stable faces. This phenomenon has led us to examine the process of CVD diamond growth and build up a 3D geometrical model, presented here, describing the film growth as a function of time. The model has been able to successfully describe the morphology of our obtained crystals and can be used as a predictive tool to predetermine the shape and size of a diamond crystal grown in a given process configuration. This renders accessible control of desirable properties such as largest usable diamond surface area and/or film thickness, before the cutting and polishing manufacture steps take place. The two latter steps are more sensitive to the geometry of the growth sectors, which will be addressed in a companion paper.Our model, applicable to the growth of any cubic lattice material, establishes a complete mapping of the final morphology state of growing diamond, as a function of the growth rates of the crystalline planes considered, namely {1 0 0}, {1 1 1}, {1 1 0}, and {1 1 3} planes, all of which have been observed experimentally in diamond films. The model makes no claim as to the stability of the obtained faces, such as the occurrence of non-epitaxial crystallites or twinning. It is also possible to deduce transient behavior of the crystal morphology as growth time is increased. The model conclusions are presented in the form of a series of diagrams, which trace the existence (and dominance) boundaries of each face type, in presence of the others, and where each boundary crossing represent a topology change in terms of number of faces, edges and vertices. We validate the model by matching it against crystals published in the literature and illustrate its predictive value by suggesting ways to increase usable surface area of the diamond film.     

Nucleophilic addition to acetylenes in superbasic catalytic systems: XV. Vinylation of 2-hydroxymethylfuran

2-Hydroxymethylfuran reacted with acetylene in superbasic catalytic systems MOH-DMSO (M = Na, K) under mild temperature conditions (75–85°C, 1–2 h), yielding 80% of 2-vinyloxymethylfuran. The product, as well as acetaldehyde acetals derived therefrom, turned out to be promising as modifiers for electrolyte in lithium-sulfur rechargeable batteries.     

Vertical migration of 85Sr, 137Cs and 131I in various arable and undisturbed soils

The vertical migration of ⁸⁵Sr, ¹³⁷Cs and ¹³¹I in some arable and undisturbed single-contaminated soils was studied by gamma-spectrometry measurements under lysimetric laboratory conditions during irrigation of the soil profiles with wet atmospheric precipitation for about one year, except ¹³¹I. A new simple exponential compartment (box) model was derived, which makes it possible to calculate the migration rate constants and migration rates in the individual soil layers (vertical sections) as well as the total vertical migration rate constants and total vertical migration rates of radionuclides in the bulk soil horizon. The relaxation times of radionuclides in respective soil horizons can also be evaluated.     

Vinyl‐type polymerization of norbornene by nickel(II) bisbenzimidazole catalysts

Novel nickel(II) bisbenzimidazole complexes were prepared via a three‐step synthetic procedure consisting of aniline/diacid condensation, ligand N‐alkylation, and metal complexation. The complexes were characterized by X‐ray crystallography and found to possess a pseudotetrahedral geometry. Upon activation with methylaluminoxane, these nickel bisbenzimidazoles did not polymerize simple olefins (e.g., ethylene, propylene, and 1‐butene) but were found to carry out the rapid and efficient polymerization of norbornene. The polynorbornene products were characterized by gel permeation chromatography/light scattering, ¹³C NMR, and IR, and their Mark–Houwink and dn/dc parameters were determined. The molecular weights of the polynorbornenes were very high (weight‐average molecular weight = 587,000–797,000 g/mol). ¹³C NMR suggested that the polymerization occurred via vinyl addition (i.e., a 2,3‐linked polymer); no ring‐opened product was observed. Thermogravimetric analysis indicated that the polynorbornenes were stable up to 400 °C under nitrogen. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2095–2106, 2003