Experimental investigation of explosive plasma antennas

Explosion-produced plasma jets formed in free spece are experimentally investigated. The feasibility of emitting pulsed electromagnetic signals by plasma jets is shown, and the emitting conditions are studied. Comparison is made between the results of experiments with short and long plasma jets. When the jet passes through the field of a helix, a short-term increase in the emitted signal is detected. A linear parametric model of interaction between the plasma jet and an exciting electromagnetic signal is proposed. The operating performance of instrumentation developed for the investigation is presented.     

Nonlinear resistor based on a polymer-ceramic composition

The resistivity of composite nonlinear resistors (varistors) consisting of zinc oxide ceramic and high-density polyethylene, as well as IR spectra and X-ray diffraction patterns taken of the samples, are studied. The component composition of the resistor is shown to influence its resistivity and IR and X-ray spectra.     

Numerical study of simultaneous natural convection heat transfer from both surfaces of a uniformly heated thin plate with arbitrary inclination

 Numerical studies were conducted to investigate the natural convection heat transfer around a uniformly heated thin plate with arbitrary inclination in an infinite space. The numerical approach was based on the finite volume technique with a nonstaggered grid arrangement. For handling the pressure–velocity coupling the SIMPLE-algorithm was used. QUICK scheme and first order upwind scheme were employed for discretization of the momentum and energy convective terms respectively. Plate width and heating rate were used to vary the modified Rayleigh number over the range of 4.8×10⁶ to 1.87×10⁸. Local and average heat transfer characteristics were compared with regarding to the inclination angle. The empirical expressions for local and average Nusselt number were correlated. It has been found that for inclination angle less than 10^∘, the flow and heat transfer characteristics are complicated and the average Nusselt number can not be correlated by one equation while for inclination angle larger than 10^∘, the average Nusselt number can be correlated into an elegant correlation. Received on 18 April 2001 / Published online: 29 November 2001     

Stability of a deflagration front in compressible media

A two-dimensional linear analysis of the planar flame front stability for a compressible fluid is presented. The analysis shows that there are two types of perturbations. The first type, corresponding to waves in incompressible media, has already been studied by Landau. It predicts absolute instability of the flame front. The second type of perturbations is due to fluid compressibility and the dependence on upstream flow parameters of the flame front velocity. Three different regimes for these perturbations are possible: stable, acoustically unstable, and absolutely unstable. The instability results in a pronounced pressure wave generation.A one-dimensional analysis of the interaction of the flame front with flow boundaries is performed. Under some circumstances, this interaction is shown to cause exponential growth of the perturbations.     

Quantum information processing in optical images

Optical images can be used to transport, store and process information in a parallel way. We discuss different results obtained in the domain of ‘quantum imaging’, aiming at exploiting at the same time the quantum properties of optical images and their intrinsic parallelism. We define the notion of standard quantum limit (SQL) in optical resolution, set by the quantum noise of usual coherent light, and show that it can be much lower than the diffraction limit. We also prove that this limit can be circumvented by especially designed nonclassical and multimode light. We present an experiment showing that OPOs oscillating inside an exactly confocal cavity actually produce such transverse multimode nonclassical light. We finally describe another experiment which has surpassed the SQL in the case of beam positioning, both in the 1D and 2D cases.     

Molecular flow and wall collision age distributions

The use of storage cells has become a standard technique for internal gas targets in conjunction with high energy storage rings. In case of spin-polarized hydrogen and deuterium gas targets the interaction of the injected atoms with the walls of the storage cell can lead to depolarization and recombination. Thus the number of wall collisions of the atoms in the target gas is important for modeling the processes of spin relaxation and recombination. It is shown in this article that the diffusion process of rarefied gases in long tubes or storage cells can be described with the help of the one-dimensional diffusion equation. Mathematical methods are presented that allow one to calculate collision age distributions (CAD) and their moments analytically. These methods provide a better understanding of the different aspects of diffusion than Monte Carlo calculations. Additionally it is shown that measurements of the atomic density or polarization of a gas sample taken from the center of the tube allow one to determine the possible range of the corresponding density weighted average values along the tube. The calculations are applied to the storage cell geometry of the HERMES internal polarized hydrogen and deuterium gas target. Received 9 July 2001 and Received in final form 18 September 2001     

A rapid and sensitive extractive spectrophotometric determination of copper(II) in pharmaceutical and environmental samples using benzildithiosemicarbazone.

Benzildithiosemicarbazone (BDTSC) is proposed as a sensitive and selective analytical reagent for the extractive spectrophotometric determination of copper(II). BDTSC reacts with copper(II) in the pH range 1.0-7.0 to form a yellowish complex. Beer's law is obeyed in the concentration range 0.5-0.4 microg cm(-3). The yellowish Cu(II)-BDTSC complex in chloroform shows a maximum absorbance at 380 nm, with molar absorptivity and Sandell's sensitivity values of 1.63 x 10(4) dm3 mol(-1) cm(-1) and 0.00389 microg cm(-2), respectively. A repetition of the method is checked by finding the relative standard deviation (RSD) (n = 10), which is 0.6%. The composition of the Cu(II)-BDTSC complex is established as 1:1 by slope analysis, molar ratio and Asmus' methods. An excellent linearity with a correlation coefficient value of 0.98 is obtained for the Cu(II)-BDTSC complex. The instability constant of the complex calculated from Edmond and Birnbaum's method is 7.70 x 10(-4) and that of Asmus' method is 7.66 x 10(-4), at room temperature. The method is successfully employed for the determination copper(II) in pharmaceutical and environmental samples. The reliability of the method is assured by analyzing the standard alloys (BCS 5g, 10g, 19e, 78, 32a, 207 and 179) and by inter-comparison of experimental values, using an atomic absorption spectrometer.     

Synthesis of Palladium and Nickel Complexes with Octaphenyltetraazaporphyrins

Palladium(II) and nickel(II) complexes with octaphenyltetraazaporphyrin, octakis(4-bromophenyl)tetraazaporphyrin, and octakis(4-nitrophenyl)tetraazaporphyrin were obtained by reactions of octaphenyltetraazaporphyrin, Mg octaphenyltetraazaporphyrin, octakis(4-bromophenyl)tetraazaporphyrin, and octakis(4-nitrophenyl)tetraazaporphyrin with palladium(II) and nickel(II) chlorides in DMF.