Purification and Characterization of Tyrosine Phenol Lyase from Citrobacter freundii

The purification and characterization of intracellular tyrosine phenol lyase from Citrobacter freundii has been carried out. The enzyme was purified 35-fold to homogeneity by ammonium sulphate precipitation and hydrophobic interaction chromatography. Its subunit molecular weight was found to be 52 kDa on sodium dodecyl sulphate polyacrylamide gel electrophoresis. The purified tyrosine phenol lyase showed maximum activity in borate buffer (0.05 M at pH 8.5) at 45 °C after 20 min of incubation. The K _m and V _max values of purified enzyme were found to be 0.446 mm and 0.342 mM/min/mg. This enzyme exhibits t _1/2 of 10, 52 and 130 min at 55, 45 and 35 °C, respectively. The N-terminal amino acid sequence was determined as MET-ASN-TYR-PRO-ALA-GLU-PRO-PHE-ARG-ILE-TRP-TRP-VAL-GLY.     

Performance investigation of an advanced tracked prime mover on the low bearing soil

This study has presented a performance investigation of an advanced tracked prime mover for the operation of agricultural goods and other operations on peat terrain. The maximum and continuous traction torque of the prime mover has been developed by designing an advanced controller for controlling the intelligent system. The prime mover’s mobility is studied with ultrasonic displacement sensor, torque transducer, National Instrument cRIO-9004 Compact-RIO Real-time Controller Unit (RCU), a National Instrument TPC 2106T Touch Panel Control (TPC), a Trimble AG132 GPS antenna and receiver unit, and a Dlink DIR-655 router. The fuzzy logic controller (FLC) has been equipped with the prime mover hydraulic system to increase the traction torque of the hydraulic motor when the prime mover’s sinkage is more than or equal to 70 mm. The prime mover’s design demonstrates good potential in traversing peat terrain as the measured tractive effort was found to be 48% of the vehicle’s gross weight while the recommended tractive effort is in the range of 30–36% of the vehicle’s gross weight.     

Comparison of cellulose nanocrystal (CNC) filler on chemical,mechanical, and corrosion properties of epoxy-Zn protective coatings for mild steel in 3.5% NaCl solution

Cellulose - This present work evaluated the influence of oil palm frond cellulose nanocrystal (OPF-CNC) as a nanofiller to improve the barrier protection of the epoxy-Zn coating to lessen the...     

Synthesis, thermal stability, electronic features, and antimicrobial activity of phenolic azo dyes and their Ni(II) and Cu(II) complexes

Four water soluble azo dyes, 4-(isopropyl)-2-[(E)-(4-chlorophenyl)diazenyl]phenol (L ¹), 4-(isopropyl)-2-[(E)-(2,4-dichlorophenyl)diazenyl]phenol (L²), 4-(sec-butyl)-2-[(E)-(4-chlorophenyl) diazenyl]phenol (L ³), 4-(sec-butyl)-2-[(E)-(2,4-dichlorophenyl)diazenyl]phenol (L ⁴), and their Cu(II) and Ni(II) complexes were synthesized and characterized using spectroscopic methods. Examination of their thermal stability revealed similar decomposition temperature of approximately 260–300°C and that they were more thermally stable than their metal complexes. Ni(II) complexes of ligands L² and L⁴ were more stable than the other coordination compounds. Among the synthesized ligands, L² and the complexes Cu(L³)₂ and Ni(L⁴)₂ showed both antimicrobial and antifungal activity. However, the other ligands and the complexes were poorly active against selected microorganisms.     

Determination of Cadmium and Selenium in Food Samples by Electrothermal Atomic Absorption Spectrometry using Ni + Pt Modifier Mixture

Journal of Analytical Chemistry - Determination of cadmium and selenium in food samples mostly consumed in Turkey has been performed by electrothermal atomic absorption spectrometry using Ni + Pt...     

Synthesis of Some Polymer‐Metal Complexes and Elucidation of their Structures

In this study, the nine coordination polymers of Fe(III), Co(II) and Ni(II) salts have been synthesized using polyacrylamide (PAA), polt(ethylene glycol) (PEG) and poly(vinyl alcohol) (PVA) and their structures were characterized by magnetic and conductivity measurements, ultraviolet‐visible (UV‐VIS), FTIR spectroscopy and thermogravimetric analysis (TGA). The structures of Fe(III) complexes in the all coordination polymers were found as tetrahedral. The structures of PAA‐Co(II) coordination polymer was determined as octahedral geometry whereas PEG‐Co(II) and PVA‐Co(II) complexes showed as tetrahedral structure. PAA‐Ni(II) and PEG‐Ni(II) complexes have octahedral geometry, whereas PVA‐Ni(II) has a square planar structure. Besides, the stress‐strain experiments of PVA‐metal coordination polymers obtained rubber‐like structure were carried out and the value of breaking‐strain of PVA‐Ni(II) complex was found to be about 17% of vulcanized natural rubber. The conductivities of the resulting polymer‐metal complexes were measured by four‐probe technique and were found in the range 10^?5?10^?6 Scm^?1. Thus, it was suggested that they can be used in the field potential application of conducting polymers. TGA results revealed that among the complexes PEG‐Fe(III) and PVA‐Fe(III) complexes have the highest thermally stable.     

Molecularly Imprinted Polypyrrole for DNA Determination

In this study graphite electrodes modified by a thin DNA‐imprinted polypyrrole layer, which was able to bind specific target‐DNA, are reported. For this aim, electrochemical synthesis of polypyrrole was performed on a pencil graphite electrode by cyclic voltammetry (CV) or by potential pulse sequences (PPS). The modified electrode surface was used for electrochemical determination of target‐DNA by differential pulse voltammetry. According to our best knowledge this is a first report on the application of DNA‐imprinted polymer for the determination of target‐DNA. The results showed that the molecularly imprinted polypyrrole (MIPPy) layer that formed on the carbon electrode surface was sensitive for target‐DNA, while the nonimprinted polypyrrole layer was not sensitive to the same target‐DNA. Comparison of electrodes modified using PPS and CV techniques is presented.     

Decontamination of radionuclides on construction materials

A wide variety of materials can become contaminated by radionuclides, either from a terrorist attack or an industrial or nuclear accident. The final disposition of these materials depends, in large part, on the effectiveness of decontamination measures. This study reports on investigations into the decontamination of a selection of building materials. The aim has been to find an effective, easy-to-use and inexpensive decontamination system for radionuclides of cesium and cobalt, considering both the chemical and physical nature of these potential contaminants. The basic method investigated was surface washing, due to its ease and simplicity. In the present study, a basic decontamination formulation was modified by adding isotope-specific sequestering agents, to enhance the removal of cesium(I) and cobalt(II) from such construction materials as concrete, marble, aluminum and painted steel. Spiking solutions contained ¹³⁴Cs or ⁶⁰Co, which were prepared by neutron activation in the SLOWPOKE-2 nuclear reactor facility at the Royal Military College of Canada. Gamma spectroscopy was used to determine the decontamination efficiency. The results showed that the addition of sequestering agents generally improved the radiological decontamination. Although the washing of both cesium and cobalt from non-porous materials, such as aluminum and painted steel, achieved a 90–95 % removal, the decontamination of concrete and marble was more challenging, due to the porous nature of the materials. Nevertheless, the removal efficiency from 6-year-old concrete increased from 10 % to approximately 50 % for cobalt(II), and from 18 to 55 % for cesium(I), with the use of isotope binding agents, as opposed to a simple water wash.     

Investigation of mass attenuation coefficients of water, concrete and bakelite at different energies using the FLUKA Monte Carlo code

The mass attenuation coefficients of water, bakelite and concrete sample defined in the simulation package were obtained using the FLUKA Monte Carlo code at 59.5, 80.9, 140.5, 356.5, 661.6, 1173.2 and 1332.5 keV photon energies. The results for the mass attenuation coefficients obtained by simulation have been compared with experimental and the theoretical ones and good agreement has been observed. The results indicate that this process can be followed to determine the data on the attenuation of gamma-rays with the several energies in other materials. Also, the deposited energy by 661.6 keV photons at several thicknesses of each media was determined as being an important data for radiation shielding studies.