Hydrogen encapsulation in a silicon clathrate type I structure: Na5.5(H2)2.15Si46: synthesis and characterization

A hydrogen-encapsulated inorganic clathrate, which is stable at ambient temperature and pressure, has been prepared in high yield. Na5.5(H2)2.15Si46 is a sodium-deficient, hydrogen-encapsulated, type I silicon clathrate. It was prepared by the reaction between NaSi and NH4Br under dynamic vacuum at 300 degrees C. The Rietveld refinement of the powder X-ray diffraction data is consistent with the clathrate type I structure. The type I clathrate structure has two types of cages where the guest species, in this case Na and H2, can reside: a large cage composed of 24 Si, in which the guest resides in the 6d crystallographic position, and a smaller one composed of 20 Si, in which the guest occupies the 2a position. Solid-state 23Na, 1H, and 29Si MAS NMR confirmed the presence of both sodium and hydrogen in the clathrate cages. 23Na NMR shows that sodium completely fills the small cage and is deficient in the larger cage. The 1H NMR spectrum shows a pattern consistent with mobile hydrogen in the large cage. 29Si NMR spectrum is consistent with phase pure type I clathrate framework. Elemental analysis is consistent with the stoichiometry Na5.5(H2.15)2Si46. The sodium occupancy was also examined using spherical aberration (Cs) corrected scanning transmission electron microscopy (STEM). The high-angle annular dark-field (HAADF) STEM experimental and simulated images indicated that the Na occupancy of the large cage, 6d sites, is less than 2/3, consistent with the NMR and elemental analysis.     

Chemistry of tantalum clusters in solution and on SiO2 supports: analogies and contrasts

Tantalum clusters have been synthesized from Ta(CH2Ph)5 on the surface of porous fumed SiO2. When these clusters are small, incorporating, on average, several Ta atoms, their chemistry is similar to that of molecular tantalum clusters (and other early transition-metal) clusters. For example, The Ta-Ta bonds in these small supported clusters have been characterized by extended X-ray absorption fine structure (EXAFS), IR, and UV-vis spectroscopy, being similar to those in molecular analogues. The redox reactions of the supported clusters, characterized by X-ray absorption near-edge structure, are analogous to those of early transition-metal clusters in solution. In contrast to the largest of these clusters in solution and in the solid state, those supported on SiO2 are raftlike, facilitating the substantial metal-support-oxygen bonding that is evident in the EXAFS spectra. Samples consisting of tantalum clusters on SiO2 catalyze alkane disproportionation and the conversion of methane with n-butane to give other alkanes, but catalytic properties of analogous clusters in solution have barely been explored.     

Stoichiometry effects in gaAs epitaxy for ballistic tunneling semiconductor devices

The effect of stoichiometry on various features of III-V compounds are investigated. It is shown experimentally that the optimum vapor pressure of V elements minimizes the deviation from the stoichiometric composition. Vapor pressure control technology is applied not only to the liquid phase epitaxy and bulk crystal growth but also to the surface reaction in molecular layer epitaxy. The surface reaction and kinetic phenomena of GaAs mono-molecular layer growth by using chemical adsorption of Ga(CH₃)₃ (trimethyl gallium: TMG) and arsine (AsH₃) was investigated. The growth feature was strongly influenced by the surface stoichiometry of arsenic during growth. For example, the diffusion of the doped impurity is affected by the AsH₃ amount of supply, the diffusion was prevented by controlling the stoichiometry. The control of stoichiometry was examined systematically and was applied for the device fabrication such as ballistic transistor.     

Management of radioactive wastes using a personal computer

This paper describes a software package for a personal computer which deals with storage records of radioactive wastes; the software keeps the records of purchase and use of radioisotopes and makes the inventory records of radioactive wastes. The records for the cargo booking of the wastes for the Japanese Radioisotope Association can be prepared by this software package.     

Determination of molecular weight of native proteins by polyacrylamide gradient gel electrophoresis

An improved method for the estimation of molecular weights of native proteins by polyacrylamide gel electrophoresis, in 9 cm x 9 cm x 0.05 mm 4-20% T fabric reinforced gradient gels, is described. Plotting the logarithm of the relative mobilities of proteins versus gel concentrations produces lines whose slopes are related to molecular weights.     

Development of a wide range-operable,rich-lean low-NOx combustor for NH3 fuel gas-turbine power generation

Low-NOx NH₃-air combustion power generation technology was developed by using a 50-kWe class micro gas-turbine system at the National Institute of Advanced Industrial Science and Technology (AIST), Japan, for the first time. Based on the global demand for carbon-free power generation as well as recent advances involving gas-turbine technologies, such as heat-regenerative cycles, rapid fuel mixing using strong swirling flows, and two-stage combustion with equivalence ratio control, we developed a low-NOx NH₃-air non-premixed combustor for the gas-turbine system. Considering a previously performed numerical analysis, which proved that the NO reduction level depends on the equivalence ratio of the primary combustion zone in a NH₃-air swirl burner, an experimental study using a combustor test rig was carried out. Results showed that eliminating air flow through primary dilution holes moves the point of the lowest NO emissions to the lesser fuel flow rate. Based on findings derived by using a test rig, a rich-lean low NOx combustor was newly manufactured for actual gas-turbine operations. As a result, the NH₃ single fueled low-NOx combustion gas-turbine power generation using the rich-lean combustion concept succeeded over a wide range of power and rotational speeds, i.e., below 10–40 kWe and 75,000–80,000?rpm, respectively. The NO emissions were reduced to 337?ppm (16% O₂), which was about one-third of that of the base system. Simultaneously, unburnt NH₃ was reduced significantly, especially at the low electrical power output, which was indicative of the wider operating range with high combustion efficiency. In addition, N₂O emissions, which have a large Global Warming Potential (GWP) of 298, were reduced significantly, thus demonstrating the potential of NH₃ gas-turbine power generation with low environmental impacts.     

Terahertz dichroism of MBBA liquid crystal on rubbed substrate

Terahertz (THz) dichroism of a nematic liquid N-(p-methoxybenzylidene)-p-butylaniline (MBBA) was measured using a GaP Raman THz spectrometer. MBBA on a rubbed plastic substrate generates a band at around 4.0 THz: its liquid crystal phase shows strong dichroism, which well corresponds to that of the IR absorption caused by π(CH) of MBBA molecule reported in the literature. Based on inferences drawn from the present THz and the published IR dichroic results, the 4.0 THz band probably stems from lateral intermolecular or intramolecular interactions of MBBA molecules aligned to the rubbing direction. The results clearly demonstrate that THz spectroscopy is powerful for discussing of phase transition and dichroism of liquid crystals.     

Bioactive Properties of Chitin/Chitosan—Calcium Phosphate Composite Materials

Calcium phosphate coating over phosphorylated derivatives of chitin/chitosan material was produced by a process based on phosphorylation, Ca(OH)₂ treatment and SBF (simulated body fluid solution) immersion. Chitin/chitosan phosphorylated using urea and H₃PO₄ and then soaked in saturated Ca(OH)₂ solution at ambient temperature, which lead to the formation of thin coatings formed by partial hydrolysis of the PO₄ functionalities, were found to stimulate the growth of a calcium phosphate coating on their surfaces after soaking in 1.5 × SBF solution for as little as one day. The Ca(OH)₂ treatment facilitates the formation of a calcium phosphate precursor over the phosphorylated chitin/chitosan, which in turn encourages the growth of a calcium deficient apatite coating over the surface upon immersion in SBF solution. The bio-compatibility of calcium phosphate compound—chitin/chitosan composite materials was evaluated by cell culture test using L-929 cells. The initial anchoring ratio and the adhesive strength of L-929 cells for composites was higher than that for the polystyrene disk (LUX, control). The results of in-vitro evaluation suggested that the calcium phosphate—chitin/chitosan composite materials were suitable for cell carrier materials.     

In situ SERS spectroscopy of Ag-modified pyrolytic graphite in organic electrolytes

Surface enhanced Raman scattering (SERS) has been applied to study the lithium intercalation/deintercalation process at the interface of a pyrolytic graphite electrode with propylene and ethylene carbonate containing organic solutions. We have focused on the lattice vibration of the most outer graphite surface layer simultaneously with cyclic voltammetric measurements. In situ Raman spectroscopy performed in this way allowed us to determine the La value that describes the size of graphitic microcrystallites along the a-axis. It was found that the La value decreases when the electrode is polarized to potentials between 0.02 and 1.0 V. This phenomenon can be correlated with the intercalation of lithium ions into the graphene structure. According to the spectral change, the size of the graphitic microcrystallites shows reversible behavior with potential cycling at the surface of the electrode. Electronic Publication     

Development of terahertz electromagnetic wave generation based on nanometer films with atomic accuracy

The terahertz region is between the optical wave and the so-called microwaves; it had not been studied until 1963, when Nishizawa started the development of a THz wave generation based on the character of lattice or molecular vibrations. In 1979, Raman laser oscillation was realized using GaP, and in 1983, the oscillation of lattice vibration (12 THz) was achieved by mixing with the original wave. Recently, many kinds of oscillators have been developed: LiNbO₃ and others for parametric oscillations, TUNNETT diode, so-called Ballistic SIT, etc. These frequencies can induce lattice or molecular vibrations, observable through reflection or transmission. Therefore, terahertz technology is useful for detection of toxins, including bacteria and viruses. It can be applied for investigation of structural changes in molecules, including those caused by disease or medical treatment. At the same time, it can heat up selectively a specified structure of a polymer and, hence, may be used for thermal treatment, or to enhance the reaction with a specific structure, suppressing side effects.