Optical coherence and theoretical study of the excitation dynamics of a highly symmetric cyclophane-linked oligophenylenevinylene dimer

Optoelectronic properties of a polyphenylenevinylene-based oligomer and its paracylophane-linked dimer are studied using a variety of experimental and theoretical techniques. Despite the symmetrical structure and redshifted absorption of the dimer versus the monomer, an exciton picture is not the most appropriate. Electronic structure calculations establish changes in charge density upon optical excitation and show localized excitations that cannot be accounted for by a simple Frenkel exciton model. Visible frequency pump-probe anisotropy measurements suggest that the dimer should be considered as a three-level system with a fast, approximately 130 fs, internal conversion from the higher to lower energy excited electronic state. Signatures of nuclear relaxation processes are compared for electric field-resolved transient grating and two-dimensional photon echo spectra. These measurements reveal that nuclear relaxation occurs on similar time scales for the monomer and dimer. The connection between the spectral phase of four-wave mixing signals and the time dependent width of a nuclear wave packet is discussed. Semiempirical electronic structure and metropolis Monte Carlo calculations show that the dominant line broadening mechanisms for the monomer and dimer are associated with inter-ring torsional coordinates. Together, the theoretical calculations and electric field-resolved four-wave mixing experiments suggest that while the structure of dimer is more rigid than that of monomer, the difference in their rigidities is not sufficient to slow down excited state relaxation of dimer with respect to the monomer.     

One-Pot Cooperation of Single-Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization-Hydrosilylation Process

Realizing the full potential of oxide-supported single-atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one-pot combination of Ru₁/CeO₂ and Rh₁/CeO₂ SACs enables a highly selective olefin isomerization-hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double-bond migration and anti-Markovnikov α-olefin hydrosilylation, respectively. First-principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single-pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio-selectivity (>95 %) even from industrially-relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide-supported single-atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes.     

Catalytic diesel particulate filters reduce the in vitro estrogenic activity of diesel exhaust

An in vitro reporter gene assay based on human breast cancer T47D cells (ER-CALUX) was applied to examine the ability of diesel exhaust to induce or inhibit estrogen receptor (ER)-mediated gene expression. Exhaust from a heavy-duty diesel engine was either treated by iron- or copper/iron-catalyzed diesel particulate filters (DPFs) or studied as unfiltered exhaust. Collected samples included particle-bound and semivolatile constituents of diesel exhaust. Our findings show that all of the samples contained compounds that were able to induce ER-mediated gene expression as well as compounds that suppressed the activity of the endogenous hormone 17beta-estradiol (E2). Estrogenic activity prevailed over antiestrogenic activity. We found an overall ER-mediated activity of 1.63 +/- 0.31 ng E2 CALUX equivalents (E2-CEQs) per m(3) of unfiltered exhaust. In filtered exhaust, we measured 0.74 +/- 0.07 (iron-catalyzed DPF) and 0.55 +/- 0.09 ng E2-CEQ m(-3) (copper/iron-catalyzed DPF), corresponding to reductions in estrogenic activity of 55 and 66%, respectively. Our study demonstrates that both catalytic DPFs lowered the ER-mediated endocrine-disrupting potential of diesel exhaust.     

A straightforward synthesis and structure of unprecedented iminium salts of dihydropyrido[3,2-e][1,3]thiazines

Unprecedented 2-iminium chloride salts of 5,8-dihydro-2H-pyrido[3,2-e][1,3]thiazines derivatives (8) were easily synthesized in one step from the corresponding o-chloroformyl-1,4-dihydropyridine (2) and thiourea. The structural study has been carried out by X-ray crystallography and theoretical calculations at the B3LYP/6-31G* levels and reveal that the new salts exhibit appropriate structural features to behave as calcium channel modulators.     

Coherent electronic and nuclear dynamics for charge transfer in 1-ethyl-4-(carbomethoxy)pyridinium iodide

Although polaronic interactions and states abound in charge transfer processes and reactions, quantitative and separable determination of electronic and nuclear relaxation is still challenging. The present paper employs the amplitudes, polarizations, and phases of four-wave mixing signals to obtain unique dynamical information on relaxation processes following photoinduced charge transfer between iodide and 1-ethyl-4-(carbomethoxy)pyridinium ions. Pump-probe signal amplitudes reveal the coherent coupling of an underdamped 115 cm(-1) nuclear mode to the charge transfer excitation. Assignments of this recurrence to intramolecular vibrational modes of the acceptor and to modulation of the intermolecular donor-acceptor distance are discussed on the basis of a high-level density functional theory normal-mode analysis and previously observed wave packet dynamics of solvated molecular iodine. Nuclear relaxation of the acceptor induces sub-picosecond decay of the pump-probe polarization anisotropy from an initial value of 0.4 to an asymptotic value of -0.05. Electronic structure calculations suggest that relaxation along the torsional coordinate of the ethyl group is the origin of the anisotropy decay. Electric-field-resolved transient grating (EFR-TG) signal fields are obtained by spectral interferometry with a diffractive optic based interferometer. These measurements show that the signal phase and amplitude possess similar dynamics. Model calculations are used to demonstrate how the EFR-TG signal phase yields unique information on transient material resonances located outside the laser pulse spectrum. This effect can be rationalized in that the real and imaginary parts of the nonlinear polarization are related by the Kramers-Kronig transformation, which allows the dispersive component of the polarization response to exhibit spectral sensitivity over a larger frequency range than that defined by the absorption bandwidth.     

Efficient synthesis of cis- and trans-3,4-dihydroxy-3,4-dihydromollugin

An efficient synthesis of naturally occurring compounds isolated from Pentas longiflora, cis-3,4-dihydroxy-3,4-dihydromollugin 2, and trans-3,4-dihydroxy-3,4-dihydromollugin 3 is described. The O-protected mollugins were dihydroxylated using OsO4 to achieve the corresponding cis-dihydroxy derivatives in excellent yield. The synthesis of trans-3,4-dihydroxy-3,4-dihydromollugin was achieved using Oxone in good yield. A mechanism for the formation of cis-3,4-dihydroxymollugin acetonide from the reaction of mollugin with Oxone is proposed.     

Reactivity of N-(omega-haloalkyl)-beta-lactams with regard to lithium aluminium hydride: novel synthesis of 1-(1-aryl-3-hydroxypropyl)aziridines and 3-aryl-3-(N-propylamino)propan-1-ols

The reactivity of 4-aryl-1-(2-chloroethyl)azetidin-2-ones and 4-aryl-1-(3-bromopropyl)azetidin-2-ones with regard to lithium aluminium hydride has been evaluated for the first time. 4-Aryl-1-(2-chloroethyl)azetidin-2-ones were transformed into novel 1-(1-aryl-3-hydroxypropyl)aziridines through an unprecedented conversion of beta-lactams into 2,3-unsubstituted aziridine derivatives. Unexpectedly, 4-aryl-1-(3-bromopropyl)azetidin-2-ones underwent dehalogenation towards 3-aryl-3-(N-propylamino)propan-1-ols upon treatment with LiAlH(4). 1-(1-Aryl-3-hydroxypropyl)aziridines were further elaborated by means of ring opening reactions using benzyl bromide in acetonitrile towards 3-aryl-3-[N-benzyl-N-(2-bromoethyl)amino]propan-1-ols and using aluminium(iii) chloride in diethyl ether, affording 3-aryl-3-[N-(2-chloroethyl)amino]propan-1-ols.     

Challenges in polypropylene by chemical modification

Radical reactions of i-PP are a well known technical process for the chemical degradation to increase the flowability of the i-PP melt. By decreasing the temperature and increasing the life time of the PP-radicals, a process to synthesize long chain branched i-PP, was developed. The long chain branched-i-PP allows to introduce the i-PP in processing technologies as blow moulding film technology or foaming technology. The mechanism will be discussed. The radical grafting of Polypropylene (PP) becomes more important for the developing of PP-alloys with extended properties. Methylmethacrylate and styrene were polymerized and grafted in PP at low temperatures in solid state. Grafting and polymerizing in solid state means solving the monomers in the PP-powder directly from the reactor without contacting with oxygen (air). The reaction is started by the thermal decomposition of a peroxide. The reactivity of the primary radicals from the peroxide and the transfer reactions of the polymer radical of the PMMA or PS influences the amount of the grafted polymer. The solubility of the monomers and the peroxide in the amorphous i-PP-phase was measured. The grafting yield and the dispersity of the second polymer depends on the solubility and dispersity of peroxide and monomers in the PP-powder particles.     

New general synthesis of α-alkoxyketones via α'-alkylation, α-alkylation and α,α'-dialkylation of α-alkoxyketimines

α-Methoxy- and α-ethoxyketones, as important intermediates in organic synthesis and flavor compounds in food chemistry, were synthesized by deprotonation of N-(1-alkoxy-2-propylidene)isopropylamine, prepared by condensation of the corresponding α-alkoxyacetone with isopropylamine, and subsequent reaction of the corresponding 1-azaallylic anions with alkyl halides to afford α'-alkylated, α-alkylated and α,α'-dialkylated ketimines. Hydrolysis of the imino function led to the desired substituted α-alkoxyketones. The ratio of α-, α'-, and α,α'-(di)alkylated compounds depended on the amount of base used and on the nature of the alkylating reagent.