MHD Stagnation Point on Nanofluid Flow and Heat Transfer of Carbon Nanotube over a Shrinking Surface with Heat Sink Effect

This study is to investigate the magnetohydrodynamic (MHD) stagnation point flow and heat transfer characteristic nanofluid of carbon nanotube (CNTs) over the shrinking surface with heat sink effects. Similarity equations deduced from momentum and energy equation of partial differential equations are solved numerically. This study looks at the different parameters of the flow and heat transfer using first phase model which is Tiwari-Das. The parameter discussed were volume fraction nanoparticle, magnetic parameter, heat sink/source parameters, and a different type of nanofluid and based fluids. Present results revealed that the rate of nanofluid (SWCNT/kerosene) in terms of flow and heat transfer is better than (MWCNT/kerosene) and (CNT/water) and regular fluid (water). Graphically, the variation results of dual solution exist for shrinking parameter in range λc<λ≤−1 for different values of volume fraction nanoparticle, magnetic, heat sink parameters, and a different type of nanofluid. However, a unique solution exists at −1<λ<1, and no solutions exist at λ<λc which is a critical value. In addition, the local Nusselt number decreases with increasing volume fraction nanoparticle when there exists a heat sink effect. The values of the skin friction coefficient and local Nusselt number increase for both solutions with the increase in magnetic parameter. In this study, the investigation on the flow and heat transfer of MHD stagnation point nanofluid through a shrinking surface with heat sink effect shows how important the application to industrial applications.     

Utilization of saffron (<Emphasis Type="Italic">Crocus sativus L.</Emphasis>) as sensitizer in dye-sensitized solar cells (DSSCs)

Photoelectrodes of dye-sensitized solar cells (DSSCs) have been prepared using nanosized titanium dioxide that have soaked in a solution of different saffron (Crocus sativus L.) spice content in ethanol. The optimized polyacrylonitrile (PAN)-based gel polymer electrolyte with 40.93 wt.% ethylene carbonate, 37.97 wt.% propylene carbonate, 4.37 wt.% tetrapropylammonium iodide, 9.86 wt.% PAN, 1.24 wt.% 1-butyl-3-methylimidazolium iodide, 4.35 wt.% lithium iodide and 1.28 wt.% iodine has been used as the electrolyte for DSSC. The electrolyte has conductivity of 2.91 mS cm^?1 at room temperature (298 K). DSSCs were also sensitized with saffron solution that has been added with 30 wt.% chenodeoxycholic acid (CDCA) co-adsorbent and designated as DSSC P4. The solar cell converts light-to-electricity at an efficiency of 0.31%. This is 29% enhancement in efficiency for the DSSC without addition of CDCA in the saffron-ethanol solution. The DSSC exhibits current density at short-circuit (J _sc ) of 1.26 mA cm^?2, voltage at open circuit (V _oc ) of 0.48 V and 51% fill factor. DSSC P4 also exhibits the highest incident photon-to-current density of more than 40% at 340 nm wavelength.     

Efficient coupling and relaxed alignment tolerances in pigtailing of a laser diode using dual ball lenses

In this paper, we report an efficient coupling scheme with relaxed misalignment tolerances. The proposed coupling scheme consists of two ball lenses of same diameter (1 mm) and different refractive indices. The second ball lens which is facing the fiber tip has a higher refractive index (1.833), whereas the first one which faces the laser diode has a refractive index of 1.5. Employing Gaussian and ABCD ray tracing optics, the theoretically obtained coupling efficiency can reach a unity with relaxed working distance (separation of the coupling system from the fiber tip) in the range between 1 and 4 mm at some optimum positions of the coupling lenses with regard to each other and to the facet of the laser diode. It has been found that if the distance between the first ball lens and the laser diode (d₁) is fixed at 1.1 mm, which is twice its focal length, the coupling efficiency and the working distance as well as the misalignment tolerances are greatly affected by variation of the separation between the two ball lenses (s), and for this proposed coupling scheme the highest coupling efficiency and largest working distance are obtained when s is in the range of 0.3-0.35 mm. Above and below this range there is a significant reduction in the values of the above-mentioned parameters. Experimentally, the Nd:YAG laser welding system has been used for the alignment and welding of the coupling components in a butterfly configuration; the experimentally obtained coupling efficiency of the proposed coupling system was around 75% with relaxed working distance. From the effect of lateral and angular offsets on coupling efficiency, it is clearly noticed that the mode field of laser diode is transformed from elliptical into circular and hence effectively matched with that of the single-mode fiber.     

Enhancing the Decolorization of Methylene Blue Using a Low-Cost Super-Absorbent Aided by Response Surface Methodology

The presence of organic dyes from industrial wastewater can cause pollution and exacerbate environmental problems; therefore, in the present work, activated carbon was synthesized from locally available oil palm trunk (OPT) biomass as a low-cost adsorbent to remove synthetic dye from aqueous media. The physical properties of the synthesized oil palm trunk activated carbon (OPTAC) were analyzed by SEM, FTIR-ATR, and XRD. The concurrent effects of the process variables (adsorbent dosage (g), methylene blue (MB) concentration (mg/L), and contact time (h)) on the MB removal percentage from aqueous solution were studied using a three-factor three-level Box–Behnken design (BBD) of response surface methodology (RSM), followed by the optimization of MB adsorption using OPTAC as the adsorbent. Based on the results of the analysis of variance (ANOVA) for the three parameters considered, adsorbent dosage (X₁) is the most crucial parameter, with an F-value of 1857.43, followed by MB concentration (X₂) and contact time (X₃) with the F-values of 95.60 and 29.48, respectively. Furthermore, the highest MB removal efficiency of 97.9% was achieved at the optimum X₁, X₂, and X₃ of 1.5 g, 200 mg/L, and 2 h, respectively.     

Coreflooding Studies to Investigate the Potential of Carbonated Water Injection as an Injection Strategy for Improved Oil Recovery and CO<Subscript>2</Subscript> Storage

Carbonated water injection (CWI) is a CO₂-augmented water injection strategy that leads to increased oil recovery with added advantage of safe storage of CO₂ in oil reservoirs. In CWI, CO₂ is used efficiently (compared to conventional CO₂ injection) and hence it is particularly attractive for reservoirs with limited access to large quantities of CO₂, e.g. offshore reservoirs or reservoirs far from large sources of CO₂. We present the results of a series of CWI coreflood experiments using water-wet and mixed-wet Clashach sandstone cores and a reservoir core with light oil (n-decane), refined viscous oil and a stock-tank crude oil. The experiments were carried out to assess the performance of CWI and to quantify the level of additional oil recovery and CO₂ storage under various experimental conditions. We show that the ultimate oil recovery by CWI is higher than the conventional water flooding in both secondary and tertiary recovery methods. Oil swelling as a result of CO₂ diffusion into the oil and the subsequent oil viscosity reduction and coalescence of the isolated oil ganglia are amongst the main mechanisms of oil recovery by CWI that were observed through the visualisation experiments in high-pressure glass micromodels. There was also evidence of a change in the rock wettability that could also influence the oil recovery. The coreflood test results also reveal that the CWI performance is influenced by oil viscosity, core wettability and the brine salinity. Higher oil recovery was obtained with the mixed-wet core than the water-wet core, with light oil than with the viscous oil and low salinity carbonated brine than high-salinity carbonated brine. At the end of the flooding period, an encouraging amount of the injected CO₂ was stored in the brine and the remaining oil in the form of stable dissolved CO₂. The experimental results clearly demonstrate the potential of CWI for improving oil recovery as compared with the conventional water flooding (secondary recovery) or as a water-based EOR (enhanced oil recovery) method for watered out reservoirs.     

The Effect of Plasticization on Conductivity and Other Properties of Starch/Chitosan Blend Biopolymer Electrolyte Incorporated with Ammonium Iodide

This work focuses on polymer electrolytes composed of a starch-chitosan blend host, ammonium iodide (NH₄I) and glycerol. Fourier transform infrared (FTIR) analysis confirms the interaction of starch-chitosan-NH₄I-glycerol. The highest room temperature conductivity is (1.28 ± 0.07) × 10^?3 S cm^?1, obtained by a sample containing 30 wt% glycerol. Dielectric studies showed that the electrolytes obeyed non-Debye behavior. The total ionic transference number for the 30 wt% glycerol sample was 0.991, and the conduction mechanism for this sample followed the quantum mechanical tunneling (QMT) model. Linear sweep voltammetry (LSV) showed that this sample was electrochemically stable up to 1.90 V. The highest conducting sample was used in the fabrication of an electrical double layer capacitor (EDLC) cell.     

Passively Q-Switched EDFL Using a Multi-Walled Carbon Nanotube Polymer Composite Based on a Saturable Absorber

A stable passive Q-switched erbium-doped fiber laser （EDFL） operating at 1563.5 nm is demonstrated by using a multi-walled carbon nanotube （MWCNT） polymer composite film based saturable absorber for the first time. The composite is prepared by mixing the MWCNTs homogeneous solution into a dilute PEO polymer solution before it is left to dry at room temperature to produce thin film. Then the film is sandwiched between two FC/PC fiber connectors and is integrated into the laser cavity for Q-switching pulse generation. The EDFL generates a stable pulse train with repetition rates ranging from 4.5 kHz to 20.0 kHz by varying the 1480 nm pump power from 35 mW to 53 mW. At the 53 mW pump power, the pulse width and pulse energy are 8.8 μs and 15.3 nJ, respectively.     

Growth of Fe-doped ZnO nanorods using aerosol-assisted chemical vapour deposition via in situ doping

In situ Fe doping of ZnO nanorods (NRs) was performed using aerosol assisted chemical vapour deposition (AA-CVD) technique. As the aerosol generator is located outside the reactor, AA-CVD provides the flexibility to control doping parameters, such as doping timing, doping duration and a wider choice of dopant precursors. The Fe dopant aerosol was flowed into the reactor during the growth of ZnO NRs to achieve in situ doping. The X-ray diffraction analysis indicates that the Fe dopants were introduced into the ZnO lattice and present mainly in the form of Fe²⁺. This result is supported by the X-ray photoelectron spectroscopy analysis as the doublet separation is 13.6 eV, although there is a shift of Fe_1/2 and Fe_3/2 peaks to a lower binding energy levels. A strong green emission of PL of Fe-doped ZnO NRs shows that the NRs have poor crystal quality attributed to the Fe-induced defects (recombination centres). The poor photocatalytic performance in degrading Rhodamine B solution of Fe-doped ZnO NRs further proves that the Fe-induced defects were recombination centres rather than traps. Lastly, the growth mechanism of in situ Fe doping of ZnO NRs was discussed.     

Structural prediction of a novel chitinase from the psychrophilic Glaciozyma antarctica PI12 and an analysis of its structural properties and function

The structure of psychrophilic chitinase (CHI II) from Glaciozyma antarctica PI12 has yet to be studied in detail. Due to its low sequence identity (<30?%), the structural prediction of CHI II is a challenge. A 3D model of CHI II was built by first using a threading approach to search for a suitable template and to generate an optimum target-template alignment, followed by model building using MODELLER9v7. Analysis of the catalytic insertion domain structure in CHI II revealed an increase in the number of aromatic residues and longer loops compared to mesophilic and thermophilic chitinases. A molecular dynamics simulation was used to examine the stability of the CHI II structure at 273, 288 and 300?K. Structural analysis of the substrate-binding cleft revealed a few exposed aromatic residues. Substitutions of certain amino acids in the surface and loop regions of CHI II conferred an increased flexibility to the enzyme, allowing for an adaptation to cold temperatures. A substrate binding comparison of CHI II with the mesophilic chitinase from Coccidioides immitis, 1D2K, suggested that the psychrophilic adaptation and catalytic activity at low temperatures were achieved through a reduction in the number of salt bridges, fewer hydrogen bonds and an increase in the exposure of the hydrophobic side chains to the solvent.     

Index for vehicle acoustical comfort inside a passenger car

Sound quality is among the main factors that influence customers’ preference for choosing good automobile products. It all started more than 10 years ago and grows up so fast due to high competition in the automotive industries. A-weighted noise levels and sound power are usually utilised to measure the noise but they are not adequate to characterise the impact sound inside a car. The most popular approach to determine sound quality of a product is to define an annoyance or specific index, which involves both subjective and objective evaluations. Subjective and objective tests should be studied concurrently in order to determine the sound quality inside a passenger car. This approach is used in this paper to evaluate vehicle comfort index according to most frequently used sound quality metrics, namely; Zwicker loudness, sharpness, roughness and fluctuation strength. As a result researchers of different fields of automotive acoustics investigations can use this index according to the type of road (international road roughness) without any need to perform time-consuming jury tests. The metrics are correlated with jury test results that show which of them and how much has affected the acoustical comfort of the vehicle. The relation between road roughness and vehicle acoustical comfort index is another point of interest in this research.