Rethinking Arsenate Coordination at the Surface of Goethite

When the truth stands on one leg : Arsenate coordinates at the water–goethite interface in a predominately monodentate fashion (see picture), a finding that impacts oxoanion bioavailability and challenges theories of mineral dissolution and surface complexation.

     

An anisotropic elastoplastic constitutive formulation generalised for orthotropic materials

This paper presents a finite strain constitutive model to predict a complex elastoplastic deformation behaviour that involves very high pressures and shockwaves in orthotropic materials using an anisotropic Hill’s yield criterion by means of the evolving structural tensors. The yield surface of this hyperelastic–plastic constitutive model is aligned uniquely within the principal stress space due to the combination of Mandel stress tensor and a new generalised orthotropic pressure. The formulation is developed in the isoclinic configuration and allows for a unique treatment for elastic and plastic orthotropy. An isotropic hardening is adopted to define the evolution of plastic orthotropy. The important feature of the proposed hyperelastic–plastic constitutive model is the introduction of anisotropic effect in the Mie–Gruneisen equation of state (EOS). The formulation is further combined with Grady spall failure model to predict spall failure in the materials. The proposed constitutive model is implemented as a new material model in the Lawrence Livermore National Laboratory (LLNL)-DYNA3D code of UTHM’s version, named Material Type 92 (Mat92). The combination of the proposed stress tensor decomposition and the Mie–Gruneisen EOS requires some modifications in the code to reflect the formulation of the generalised orthotropic pressure. The validation approach is also presented in this paper for guidance purpose. The \({\varvec{\psi }}\) tensor used to define the alignment of the adopted yield surface is first validated. This is continued with an internal validation related to elastic isotropic, elastic orthotropic and elastic–plastic orthotropic of the proposed formulation before a comparison against range of plate impact test data at 234, 450 and \({\mathrm {895\,ms}}^{\mathrm {-1}}\) impact velocities is performed. A good agreement is obtained in each test.     

Safety assessments of subcutaneous doses of aragonite calcium carbonate nanocrystals in rats

Calcium carbonate nanoparticles have shown promising potentials in the delivery of drugs and metabolites. There is however, a paucity of information on the safety of their intentional or accidental over exposures to biological systems and general health safety. To this end, this study aims at documenting information on the safety of subcutaneous doses of biogenic nanocrystals of aragonite polymorph of calcium carbonate derived from cockle shells (ANC) in Sprague-Dawley (SD) rats. ANC was synthesized using the top-down method, characterized using the transmission electron microscopy and field emission scanning electron microscope and its acute and repeated dose 28-day trial toxicities were evaluated in SD rats. The results showed that the homogenous 30 ± 5 nm-sized spherical pure aragonite nanocrystals were not associated with mortality in the rats. Severe clinical signs and gross and histopathological lesions, indicating organ toxicities, were recorded in the acute toxicity (29,500 mg/m²) group and the high dose (5900 mg/m²) group of the repeated dose 28-day trial. However, the medium- (590 mg/m² body weight) and low (59 mg/m²)-dose groups showed moderate to mild lesions. The relatively mild lesions observed in the low toxicity dosage group marked the safety margin of ANC in SD rats. It was concluded from this study that the toxicity of CaCO₃ was dependent on the particulate size (30 ± 5 nm) and concentration and the route of administration used.     

Electrochemical properties of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> prepared with tartaric acid chelating agent

Lithium manganese oxide (LiMn₂O₄) has been prepared using sol-gel technique under acidic (pH = 5.8) and alkaline (pH = 9) conditions with tartaric acid as chelating agent. X-ray studies show that under acidic condition, an Mn₂O₃ peak was observed indicating the presence of impurities. No impurity was observed for LiMn₂O₄ under alkaline conditions. The particle size is mostly in the range of 124 to 185 nm from HR-TEM. The lithium diffusion coefficient, D _Li+ in LiMn₂O₄ is of the order 10^?9 cm² s^?1. By using density functional theory (DFT) calculations, structural properties have been obtained. The specific discharge capacity of the cells with LiMn₂O₄ prepared under alkaline condition and with LiMn₂O₄ prepared under acidic condition discharged at 0.5 C is in the ranges of 132 to 142 and 128 to 139 mAh g^?1, respectively.     

Efficient Catalytic Reduction of 4-Nitrophenol Using Copper(II) Complexes with N,O-Chelating Schiff Base Ligands

The reduction of 4-nitrophenol to 4-aminophenol by sodium borohydride was used as a model to test the catalytic activity of copper(II) complexes containing N,O-chelating Schiff base ligands. In this study, a series of copper(II) complexes containing respective Schiff base ligands, N′-salicylidene-2-aminophenol (1), N′-salicylidene-2-aminothiazole (2), and N,N′-bis(salicylidene)-o-phenylenediamine (3), were synthesized and characterized by elemental analysis, Fourier transform infrared (FT-IR), UV-Visible (UV-Vis) and electron paramagnetic resonance (EPR) spectroscopies. The results from the 4-nitrophenol reduction showed that 3 has the highest catalytic activities with 97.5% conversion, followed by 2 and 1 with 95.2% and 90.8% conversions, respectively. The optimization of the catalyst amount revealed that 1.0 mol% of the catalyst was the most optimized amount with the highest conversion compared to the other doses, 0.5 mol% and 1.5 mol%. Recyclability and reproducibility tests confirmed that all three complexes were active, efficient, and possess excellent reproducibility with consistent catalytic performances and could be used again without a major decrease in the catalytic activity.     

The Effects of Polyphenol,Tannic Acid,or Tannic Acid in Combination with Pamidronate on Human Osteoblast Cell Line Metabolism

Background: This study investigates the effect of tannic acid (TA) combined with pamidronate (PAM) on a human osteoblast cell line. Methods: EC₅₀ for TA, PAM, and different combination ratios of TA and PAM (25:75, 50:50, 75:25) were measured by 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay. The combination index value was utilized to analyze the degree of drug interaction, while trypan blue assay was applied to analyze the cells proliferation effect. The mineralization and detection of bone BSP and Osx genes were determined via histochemical staining and PCR test, respectively. Results: The EC₅₀ of osteoblasts treated with TA and a 75:25 ratio of TA and PAM were more potent with lower EC₅₀ at 0.56 µg/mL and 0.48 µg/mL, respectively. The combination of TA and PAM (75:25) was shown to have synergistic interaction. On Day 7, both TA and PAM groups showed significantly increased proliferation compared with control and combination groups. On Day 7, both the TA and combination-treated groups demonstrated a higher production of calcium deposits than the control and PAM-treated groups. Moreover, on Day 7, the combination-treated group showed a significantly higher expression of BSP and Osx genes than both the TA and PAM groups. Conclusion: Combination treatment of TA and PAM at 75:25 ameliorated the highest enhancement of osteoblast proliferation and mineralization as well as caused a high expression of BSP and Osx genes.     

Core Shell Nanostructure: Impregnated Activated Carbon as Adsorbent for Hydrogen Sulfide Adsorption

This study focuses on the synthesis, characterization, and evaluation of the performance of core shell nanostructure adsorbent for hydrogen sulfide (H₂S) capture. Commercial coconut shell activated carbon (CAC) and commercial mixed gas of 5000 ppm H₂S balanced N₂ were used. With different preparation techniques, the CAC was modified by core shell impregnation with zinc oxide (ZnO), titanium oxide (TiO₂), potassium hydroxide (KOH), and zinc acetate (ZnAC₂). The core structure was prepared with CAC impregnated by single chemical and double chemical labelled with ZnAC₂-CAC (single chemical), ZnAC₂/KOH-CAC, ZnAC₂/ZnO-CAC, and ZnAC₂/TiO₂-CAC. Then, the prepared core was layered either with KOH, TiO₂, NH₃, or TEOS for the shell. The synthesized adsorbents were characterized in physical and chemical characterization through scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET) analyzers. Operation of the adsorber column takes place at ambient temperature, with absolute pressure at 1.5 bar. The H₂S gas was fed into the column at 5.5 L/min and the loaded adsorbents were 150 g. The performance of synthesized adsorbent was analyzed through the adsorbent’s capability in capturing H₂S gas. Based on the results, ZnAc₂/ZnO/CAC_WOS shows a better adsorption capacity with 1.17 mg H₂S/g and a 53% increment compared to raw CAC. However, the degradation of the adsorbents was higher compared to ZnAc₂/ZnO/CAC_OS and to ZnAc₂/ZnO/CAC_WS ZnAc₂/ZnO/CAC_OS. The presence of silica as a shell has potentially increased the adsorbent’s stability in several cycles of adsorption-desorption.     

Phytochemistry,Bioactivities and Traditional Uses of Michelia × alba

Michelia × alba (M. alba) is a flowering tree best known for its essential oil, which has long been used as a fragrance ingredient for perfume and cosmetics. In addition, the plant has been used in traditional medicine in Asia and dates back hundreds of years. To date, there is a limited number of publications on the bioactivities of M. alba, which focused on its tyrosinase inhibition, antimicrobial, antidiabetic, anti-inflammatory, and antioxidant activities. Nevertheless, M. alba may have additional unexplored bioactivities associated with its bioactive compounds such as linalool (72.8% in flower oil and 80.1% in leaf oil), α-terpineol (6.04% flower oil), phenylethyl alcohol (2.58% flower oil), β-pinene (2.39% flower oil), and geraniol (1.23% flower oil). Notably, these compounds have previously been reported to exhibit therapeutic activities such as anti-cancer, anti-inflammation, anti-depression, anti-ulcer, anti-hypertriglyceridemia, and anti-hypertensive activities. In this review paper, we examine and discuss the scientific evidence on the phytochemistry, bioactivities, and traditional uses of M. alba. Here, we report a total of 168 M. alba biological compounds and highlight the therapeutic potential of its key bioactive compounds. This review may provide insights into the therapeutic potential of M. alba and its biologically active components for the prevention and treatment of diseases and management of human health and wellness.