Yttria‐based sol–gel coating for capillary microextraction online coupled to high‐performance liquid chromatography

This work about the development of yttria‐based polymeric coating using [bis(hydroxyethyl) amine] terminated polydimethylsiloxanes and yttrium trimethoxyethoxide inside the capillary. The coated capillary was utilized for online capillary microextraction and high‐performance liquid chromatography analysis. The prepared coating material was characterized using scanning electron microscopy, X‐ray photoelectron spectroscopy, energy dispersive X‐ray spectrometry, and thermogravimetric analysis. The coated capillary with polymer presented better extraction efficiency compared with the pure yttria‐based coated capillary with applicability in extreme pH environments (pH 0–pH 14). Excellent extraction towards polyaromatic hydrocarbons, aldehydes, ketones, alcohols, phenols, and amides was observed with limit of detection ranging from 0.18 to 7.35 ng/mL (S/N = 3) and reproducibility in between 0.6 and 6.8% (n = 3). Capillary‐to‐capillary extraction analysis has presented reproducibility between 4.1 and 9.9%. The analysis provided linear response for seven selected phenols in the range of 5–200 ng/mL with R² values between 0.9971 and 0.9998. The inter‐day, intra‐day, and capillary‐to‐capillary reproducibility for phenols was also <10%. Real sample analysis by spiking 5, 50, and 200 ng/mL of phenols in wastewater and pool‐water produced recovery between 84.7 and 94.3% and reproducibility within 7.6% (n = 3).     

First-principle investigation of XSrH3 (X = K and Rb) perovskite-type hydrides for hydrogen storage

Hydrogen can be utilized as an energy source; therefore, hydrogen storage has received the most appealing examination interest in recent years. The investigations of hydrogen storage applications center fundamentally around the examination of hydrogen capacity abilities of recently presented compounds. XSrH₃ (X = K and Rb) compounds have been examined by density functional theory (DFT) calculations to uncover their different characteristics, as well as hydrogen capacity properties, for the first time. Studied compounds are optimized in the cubic phase, and optimized lattice constants are obtained as 4.77 and 4.99 Å for KSrH₃ and RbSrH₃, respectively. These hydrides have shown negative values of formation enthalpies as they are stable thermodynamically. XSrH₃ might be used in hydrogen storage applications because of high gravimetric hydrogen storage densities, which are 2.33 and 1.71 wt% for KSrH₃ and RbSrH₃, respectively. Moreover, electronic properties confirm the semiconductor nature of these compounds having indirect band gaps of values 1.41 and 1.23 eV for KSrH₃ and RbSrH₃, respectively. In addition, mechanical properties from elastic constants such as Young modulus and Pugh's ratio, also have been investigated, and these compounds were found to satisfy born stability conditions. Furthermore, Pugh's ratio and Cauchy pressure show that these hydrides have a brittle nature. Furthermore, thermodynamic properties such as entropy and Debye temperature have been examined using the quasiharmonic Debye model for different temperatures and pressures.     

Synthesis and Characterization of Antimony(III) Complexes of Thioamides,and Crystal Structure of {[Sb(Imt)2Cl2]2((2‐Imt)}Cl2(Imt=Imidazolidine‐2‐thione)

Antimony(III) complexes of thioamides [thioamides=thiourea (Tu), N,N′‐dimethylthiourea (Dmtu), tetramethylthiourea (Tmtu), imidazolidine‐2‐thione (Imt) and diazinane‐2‐thione (Diaz)] with the general formulae, Sb(thione)_nCl₃ (n=1, 2, 2.5, 3) were prepared and characterized by elemental analysis, IR and NMR (¹H, ¹³C) spectroscopic methods. The spectral data of the complexes are consistent with the coordination of the thiones to antimony(III). The crystal structure of one of them, {[Sb(Imt)₂Cl₂]₂(μ₂‐Imt)}Cl₂ ( 1 ), was determined by X‐ray crystallography, which shows that the complex is dinuclear consisting of two [Sb(Imt)₂Cl₂] units bridged by an Imt molecule. In 1 , the antimony atom is bonded to two chlorine atoms, two sulfur atoms of coordinated Imt molecules and one sulfur atom of a bridging Imt molecule. The antimony environment can be considered to be distorted octahedral with one Cl^? ion weakly bound to antimony.     

Capillary gas chromatographic analysis of pyrrolidinedithiocarbamate metal chelates

Pyrrolidinedithiocarbamate (PDTC) chelates of Zn(II), Cu(II), Ni(II), Co(III), Fe(III), Mn(II), Cr(III), and VO(II) were analysed by capillary GC on a DB-1701 column (30 m x 0.25 mm id) with flame ionisation detection (FID). Linear calibrations were attained within "1-30 microg/mL" for Ni(II), Fe(III), Mn(II), Cr(III), Cu(II), and VO(II), and within "2-50 microg/mL" for Co(III) and Zn(II). The limits of detection were in the "150-500 ng/mL" range, corresponding to 15-50 pg amounts reaching the FID system. The optimised method was applied to the determination of Cu(II) and Ni(II) in coins, and that of Zn(II), Cu(II), Ni(II), Fe(III), Mn(II), Cr(III), and VO(II) in pharmaceutical preparations with relative standard deviations within 1.1-5.2%. The results obtained are in good agreement with sewage water samples and the declared values for the pharmaceutical formulations, or with the results of AAS of metal contents in coins, pharmaceutical preparations, and sewage water samples.     

α-MoO3 nanowire-based amperometric biosensor for l-lactate detection

Large-scale orthorhombic single-crystalline molybdenum trioxide nanowires were synthesized using a facile one-pot hydrothermal method. Lactate oxidase enzyme was immobilized on the nanowires to produce a highly sensitive electrochemical biosensor for l-lactate detection. At an applied potential of 0.5 V, the sensor exhibited a high sensitivity of 0.87 μA/mM with a fast response to l-lactate (90% of response times within 10 s). A linear response was obtained over a concentration range from 0.5 to 8 mM with a detection limit of 0.15 mM (S/N?=?3). The developed biosensor showed excellent reproducibility and operational stability, as well as the ability to be stored long term.     

Catalytic Activity and Morphological Properties of Ni/MgO Catalysts for the Oxidative Coupling of Methane

The catalytic activity of Ni/MgO catalysts was studied for the oxidative coupling of methane (OCM). The catalysts were characterized using transmission electron microscope (TEM) and XRD. The increase in C2+ selectivity of Ni/MgO was attributed to the presence of bulk dislocations and MgNiO₂ phase. This revised version was published online in June 2006 with corrections to the Cover Date.     

Tris(2‐aminoethyl)amine‐based ferrocene‐terminated dendrimers as burning rate catalysts for ammonium perchlorate‐based propellant decomposition

Ferrocene‐based derivatives show potential application as burning rate catalysts (BRCs) for solid composite propellants. However, migration problems of simple ferrocene‐based derivatives limit their application as BRCs in solid composite propellants. To overcome the migration problems of ferrocene‐based BRCs and to enhance the burning rate of ammonium perchlorate (AP)‐based propellants, zero‐ to second‐generation tris(2‐aminoethyl)amine‐based ferrocene‐terminated dendrimers (G0, G1 and G2) were synthesized. The structures of G0, G1 and G2 were confirmed using ¹H NMR, Fourier transform infrared and UV–visible spectroscopies. The electrochemical behavior of G0, G1 and G2 was investigated using cyclic voltammetry. It was found that G0, G1 and G2 showed redox behavior due to the presence of ferrocene and this redox behavior was diffusion controlled over the investigated scan range. The burning rate catalytic effect of G0, G1 and G2 on thermal decomposition of AP was investigated using thermogravimetry and differential thermogravimetry. G0, G1 and G2 showed good catalytic effect on the thermal decomposition of AP. Anti‐migration studies showed that migration of G0, G1 and G2 was much slower than that of 2,2‐bis(ethylferrocenyl)propane (catocene) and ferrocene.     

Studies on relation between columnar order and electrical conductivity in HAT6 discotic liquid crystals using temperature-dependent Raman spectroscopy and DFT calculations

The vibrational property of 2,3,6,7,10,11-hexakis(hexyloxy)triphenylene (HAT6) discotic liquid crystal (DLC) material is investigated in this research by using temperature-dependent Raman spectroscopy technique. One-dimensional (1D) charge transport mechanism in the DLC molecules is enabled in the columnar liquid crystalline (D_h) phase. The result indicates a high core-to-core correlation in the liquid crystal columnar phase, which has a ‘memory’ like effect that extends into isotropic phase at femtosecond timescale. This correlation is also confirmed through electrical conductivity measurement of DLCs, in which the electrical conductivity is enhanced in the DLC phase. DFT simulation was also carried out in order to elucidate the basic properties of HAT6 such as the band gap in the light of Raman spectra. An interesting outcome is that a freely unspecified boundary model produces in a more flexible molecule, resulting in a reduced band gap. Thus, this work provides an understanding of relationship between columnar order and electrical conductivity of HAT6 molecule, and potential strategy for design of DLCs in electronics application.     

Measurement of <Superscript>99</Superscript>Mo production cross-section from the <Superscript>100</Superscript>Mo(n,2n) reaction with quasi monoenergetic neutron based on the <Superscript>9</Superscript>Be(p,n) reaction

The production cross-section of the medical isotope, ⁹⁹Mo from the enriched ¹⁰⁰Mo(n,2n) reaction with the average neutron energies of 21.9 and 26.5 MeV has been determined for the first time by using an off-line γ-ray spectrometric technique. The average neutron energies were generated by using the ⁹Be(p,n) reaction with the proton energies of 35 and 45 MeV from the MC50 cyclotron of the Korea Institute of Radiological and Medical Sciences (KIRAMS) at Seoul, South Korea. The ¹⁰⁰Mo(n,2n) reaction cross-section as a function of neutron energy was also calculated theoretically by using the computer code TALYS-1.8 and EMPIRE-3.2 Malta. The experimental results are in close agreement with the theoretical values from TALYS-1.8. However, the present data at the neutron energy of 21.9 MeV is slightly lower and at 26.5 MeV is higher than the values from EMPIRE-3.2 Malta.