Sparse non-negative matrix factorizations for ultrasound factor analysis

Factor analysis is a powerful tool used for the analysis of dynamic studies. One of the major drawbacks of Factor Analysis of Dynamic Structures (FADS) is that the solution is not mathematically unique when only non-negativity constraints are used to determine factors and factor coefficients. In this paper, we introduce a novel method to correct FADS solutions by constructing and minimizing a new objective function. The method is improved from non-negative matrix factorizations (NMFs) algorithm by adding a sparse constraint that penalizes multiple components in the images of the factor coefficients. The technique is tested on computer simulations, and a patient ultrasound liver study. The results show that the method works well in comparison to the truth in computer simulations and to region of interest (ROI) measurements in the experimental studies.     

Self‐Assembly of Anionic Porphyrins and Alkaline or Alkaline Earth Metal Ions Mediated by Cucurbit[7,8]uril

Nanoscaled coordination polymers based on biologically prevalent ions have potential applications in drug delivery and biomedical imaging. Herein, coordination polymer nanoparticles of anionic porphyrins, including meso‐tetra(4‐carboxyphenyl)‐porphyrin (H₂TCPP^4?) and meso‐tetra(4‐sulfonatophenyl)‐porphyrin (H₂TPPS^4?), and alkaline or alkaline earth metal cations, such as K⁺ and Ca²⁺, were constructed in aqueous solution in the presence of cucurbit[7]uril (CB7) or cucurbit[8]uril (CB8). UV/Vis absorption and fluorescence spectroscopy, dynamic light scattering (DLS), scanning electron spectroscopy (SEM), and atomic force microscopy (AFM) were applied to explore the assembly and particle formation of porphyrin anions and metal cations mediated by CBn. The particle size depends on the kinds of CBn and metal cations and their concentrations. The uptake of H₂TPPS^4? particles by tumor cells (A549 cells) was found to be more efficient than H₂TPPS^4? at 37 °C, showing the application potential of such assembled particles in biology and medicine.     

Sensitive monitoring of penicillin antibiotics in milk and honey treated by stir bar sorptive extraction based on monolith and LC‐electrospray MS detection

In the present study, a convenient and sensitive method for determination of six penicillin antibiotics (amoxicillin, ampicillin, penicillin G, oxacillin, cloxacillin, and dicloxacillin) in milk and honey samples was developed. Milk and honey samples were diluted with water, then directly treated by stir bar sorptive extraction based on poly (vinylimidazole‐divinylbenzene) monolithic material as coating. The analytes were analyzed by LC/ESI‐ MS/MS. Several extraction parameters including extraction and desorption time, pH value, and ionic strength in sample matrix were investigated in detail. Under the optimized extraction conditions, the calculated detection limits for the target compounds were as low as 0.23–2.66 ng/kg in milk and 0.18–1.42 ng/kg in honey, respectively. Good linearity was obtained for analytes with the correlation coefficients (R²) above 0.997. Excellent method reproducibility was achieved in terms of intraday and interday precisions, indicated by the RSDs of <5.0 and <10.0%, respectively. Finally, the proposed method was successfully applied to the determination of penicillin antibiotics residues in different milk and honey samples.     

New monolithic stir-cake-sorptive extraction for the determination of polar phenols by HPLC

A novel porous monolith has been prepared and used as a sorbent in stir-cake-sorptive extraction (SCSE). The monolithic material was prepared by in-situ copolymerization of allyl thiourea (AT) and divinylbenzene (DB) in the presence of dimethylformamide as a porogen solvent. To optimize the polymerization conditions, different monoliths with different ratios of functional monomer to porogenic solvent were prepared, and their extraction efficiency was investigated in detail. The monolith was characterized by elemental analysis, scanning electron microscopy, mercury intrusion porosimetry, and infrared spectroscopy. Analysis of polar phenols in environmental water samples by a combination of ATDB-SCSE and HPLC with diode-array detection was selected as a model for the practical application of the new sorbent. Several extraction conditions, including extraction and desorption time, pH, and ionic strength of the sample matrix were optimized. The results showed that the new monolith had high affinity for polar phenols and could be used to extract them effectively. Under the optimum conditions, low detection (S/N?=?3) and quantification (S/N?=?10) limits were achieved for the phenols, within the ranges 0.18–0.90 and 0.59–2.97 μg L^?1, respectively. The linearity of the method was good, and the method enabled simple, practical, and low-cost extraction of these analytes. The distribution coefficients between ATDB and water (K _ATDB/W) were calculated for the phenolic compounds and compared with K _O/W. Finally, the proposed method was successfully applied to the determination of the compounds in three environmental water samples, with acceptable recovery and satisfactory repeatability.

Study of Interactions and Association Thermodynamics Between Sudan Red and Sodium Dodecyl Sulfate in Microemulsions

The absorption spectrum of Sudan red III (SR) in oil solutions and a series of O/W microemulsion with surfactant sodium dodecyl sulfate (SDS) has been determined by the UV-Vis spectrophotometer. We found that an association interaction existed between the stain SR and anionic surfactant SDS in water/mixed oil/SDS microemulsions. By measuring the absorbance of Sudan red in a series of microemulsions which has different R values and using the appropriate association models to analyze the experimental data, we obtain the association constants of SR and SDS, and the values of thermodynamics functions of associationΔ_r G _m has also been calculated from the association constants.     

Study on Bioactive Secondary Metabolites from the Mangrove-Derived Fungus Penicillium verruculosum TGM14

Chemistry of Natural Compounds - A new compound, named penicillquei C (1), and eight known compounds (2–9), were isolated from the fermentation broth of mangrove-derived fungus Penicillium...     

基于非靶向代谢组学的茄梨和红茄梨成熟期果皮代谢产物的差异分析

为了探究西洋梨品种茄梨及其红色芽变红茄梨成熟期果皮代谢产物差异,采用超高效液相色谱-质谱联用技术,对茄梨和红茄梨成熟期果皮进行非靶向代谢组学研究。通过主成分分析和正交偏最小二乘判别分析,构建了多变量统计分析模型,结合模型和变量重要性投影与最大差异倍数值,基于精确质量数、二级碎片以及同位素分布,使用PMDB(Plant Metabolome Database)数据库进行定性,筛选并鉴定出茄梨和红茄梨果皮中显著性变化(P<0.05, VIP(variable importance in project)≥1)的差异代谢物有83种,主要包括酚酸类、黄酮类和氨基酸类物质,涉及类黄酮代谢、氨基酸代谢、苯丙烷类代谢等代谢途径,其中53种物质含量上调,30种物质表达下调。通过KEGG(Kyoto Encyclopedia of Genes and Genomes)数据库进一步对差异代谢物质进行通路富集分析,差异代谢物主要分布在20条代谢途径中,P<0.05的代谢途径有6条,分别是类黄酮生物合成、黄酮和黄酮醇生物合成、苯丙烷生物合成、丁酸酯代谢、苯丙氨酸代谢、酪氨酸代谢。这些差异代谢物的变化可能是导致茄梨和红茄梨果皮色泽不同的原因。该研究从植物代谢组学角度初步揭示了茄梨和红茄梨成熟期果皮的代谢产物差异性。     

Intrinsic Peroxidase‐like Activity of Porous CuO Micro‐/nanostructures with Clean Surface

Porous CuO micro‐/nanostructures with clean surface, prepared through Cu₂(OH)₂CO₃ precursor followed by calcination in air, were proven to be an effective peroxidase mimic. They can quickly catalyze oxidation of the peroxidase substrate 3,3′,5,5′‐tetramethylbenzidine (TMB) in the presence of H₂O₂, producing a blue color. The obtained porous CuO micro‐/nanostructure have potential application in wastewater treatment. The apparent steady‐state kinetic parameter was studied with TMB as the substrate. In addition, the potential application of the porous CuO in wastewater treatment was demonstrated with phenol‐containing water as an example. Such investigation not only confirms the intrinsic peroxidase‐like activity of micro‐/nanostructured CuO, but also suggests its potential application in wastewater treatment.     

Engineering the Atomic Interface with Single Platinum Atoms for Enhanced Photocatalytic Hydrogen Production

It is highly desirable but challenging to optimize the structure of photocatalysts at the atomic scale to facilitate the separation of electron–hole pairs for enhanced performance. Now, a highly efficient photocatalyst is formed by assembling single Pt atoms on a defective TiO₂ support (Pt₁/def‐TiO₂). Apart from being proton reduction sites, single Pt atoms promote the neighboring TiO₂ units to generate surface oxygen vacancies and form a Pt‐O‐Ti³⁺ atomic interface. Experimental results and density functional theory calculations demonstrate that the Pt‐O‐Ti³⁺ atomic interface effectively facilitates photogenerated electrons to transfer from Ti³⁺ defective sites to single Pt atoms, thereby enhancing the separation of electron–hole pairs. This unique structure makes Pt₁/def‐TiO₂ exhibit a record‐level photocatalytic hydrogen production performance with an unexpectedly high turnover frequency of 51423 h^?1, exceeding the Pt nanoparticle supported TiO₂ catalyst by a factor of 591.