Neumann Boundary Conditions Inhibiting SSB in Coleman-Weinberg Mechanism

In this work we show that homogeneous Neumann boundary conditionsinhibit the Coleman-Weinberg mechanism for spontaneous symmetry breakingin the scalar electrodynamics if the length of the finite region is small enough (a = e²M^-1_φ, where M_φ is the mass of the scalar field generated by the Coleman-Weinberg mechanism).     

Enthalpy relaxation in an epoxy-cycloaliphatic amine resin

Enthalpy relaxation in a system containing the diglycidyl ether of bisphenol A (DGEBA) resin and a diamine, 1,3-bisaminomethylcyclohexane (1,3-BAC) as curing agent, has been investigated by differential scanning calorimetry (DSC). Samples fully cured were annealed at temperature T_g–15 °C for periods of time from 1 h to a maximum of 168 h. The enthalpy relaxation is analyzed by the peak shift method, in which the sample is heated at 10 °C/min following cooling at various rates through the glass transition region. The key parameters of structural relaxation determined were the non-linearity parameter x=0.47 ± 0.02, the apparent activation energy Δh*=1264 ± 48 kJ/mol or Δh*/R=152 ± 6 kK and the non-exponentiality parameter β ≈ 0.3. The results, obtained by the same method, were compared with those for other systems based on fully cured DGEBA. The correlations among these parameters with the peak shift model should be considered with caution. However, the results show that a correlation between crosslink lengths and the value of Δh* can be considered. The relaxation process for DGEBA/1,3-BAC proves to be highly cooperative. Received: 28 June 2000 Accepted: 6 September 2000     

Chemical Characterization and Bioactivity of Commercial Essential Oils and Hydrolates Obtained from Portuguese Forest Logging and Thinning

Essential oils (EOs) and hydrolates (Hds) are natural sources of biologically active ingredients with broad applications in the cosmetic industry. In this study, nationally produced (mainland Portugal and Azores archipelago) EOs (11) and Hds (7) obtained from forest logging and thinning of Eucalyptus globulus, Pinus pinaster, Pinus pinea and Cryptomeria japonica, were chemically evaluated, and their bioactivity and sensorial properties were assessed. EOs and Hd volatiles (HdVs) were analyzed by GC-FID and GC-MS. 1,8-Cineole was dominant in E. globulus EOs and HdVs, and α- and β-pinene in P. pinaster EOs. Limonene and α-pinene led in P. pinea and C. japonica EOs, respectively. P. pinaster and C. japonica HVs were dominated by α-terpineol and terpinen-4-ol, respectively. The antioxidant activity was determined by DPPH, ORAC and ROS. C. japonica EO showed the highest antioxidant activity, whereas one of the E. globulus EOs showed the lowest. Antimicrobial activity results revealed different levels of efficacy for Eucalyptus and Pinus EOs while C. japonica EO showed no antimicrobial activity against the selected strains. The perception and applicability of emulsions with 0.5% of EOs were evaluated through an in vivo sensory study. C. japonica emulsion, which has a fresh and earthy odour, was chosen as the most pleasant fragrance (60%), followed by P. pinea emulsion (53%). In summary, some of the studied EOs and Hds showed antioxidant and antimicrobial activities and they are possible candidates to address the consumers demand for more sustainable and responsibly sourced ingredients.     

Chemical Approach to the Optimization of Conditions Using HS-SPME/GC–MS for Characterization of Volatile Compounds in Eugenia brasiliensis Fruit

Grumixama (Eugenia brasiliensis Lam.) is a native fruit of the Brazilian Atlantic Forest, belonging to the Myrtaceae family, which designatesthe most significant number of species with food potential. It stands out due to its phytochemical characteristics because of the presence of polyphenols and volatile organic compounds. Volatile compounds are substances released by foods that give off an aroma and influence flavor. Solid-phase microextraction is a technique that allows for low-cost, fast, and solvent-free extraction, has an affinity for numerous analytes, and is easily coupled to gas chromatography. The objectives of this work were to evaluate the efficiency of different fibers of SPME (solid-phase microextraction) in the extraction of volatile organic compounds from grumixama pulp; optimize a method for extraction time, temperature, and sample weight; and to determine the characteristic volatile profile of this fruit. For the extraction of volatile compounds, three fibers of different polarities were used: polar polyacrylate (PA) fibers, divinylbenzene/carboxyne/polydimethylsiloxane (DVB/CAR/PDMS) semipolar fibers, and polydimethylsiloxane/divinylbenzene (PDMS/DVB). Fourteen volatile organic compounds (VOCs) were identified by DVB/CAR/PDMS, six by PA, and seven by PDMS/DVB through solid-phase microextraction in the headspace mode (SPME-HS). Considering the total number of compounds identified, regardless of the fiber used, and the optimization of the method, Eugenia brasiliensis presented sesquiterpene fractions (85.7%, 83.3%, and 85.7% of total VOCs) higher than the monoterpene fractions (14.3%, 16.7%, and 14.3%) for DVB/CAR/PDMS, PA, and PDMS/DVB, respectively in its composition. In addition, it was possible to verify that the fiber DVB/CAR/PDMS presented a better efficiency due to the larger chromatographic area observed when the grumixama pulp was subjected to conditions of 75 °C, 2.0 g, and an adsorption time of 20 min.     

Coupled Dynamics of Anode and Cathode in Proton-Exchange Membrane Fuel Cells

An external reference electrode was used to monitor individually the evolution of the anodic and cathodic potentials during the stationary as well as oscillatory operation of a Direct Formic Acid Fuel Cell (DFAFC) and a Direct Methanol Fuel Cell (DMFC). Besides evidencing the large activation loss in both cells, we were able to observe how the oscillatory operation of such devices affects their cathodes. In fact, cathodic oscillations synchronized with the cell voltage dynamics were observed, hitherto never reported on fuel cells. We have addressed these phenomena taking into account two main coupling processes: through the proton concentration and a global coupling stemming from the control mode (potentiostatic or galvanostatic).     

Flowfield vorticity calculation using PIV data

The simultaneous velocity measurement at different flowfield locations is one of the key advantages of a PIV system. This allows a straightforward calculation of derived flow magnitudes including spatial correlations. Thus, postprocessing techniques need further attention in order to assure maximum feature extraction with minimum error, among other issues. This paper is devoted to expand the capability of calculating vorticity in a PIV sampled flow field. The methodology proposed is based on linear algorithms (FIR filters) able to obtain the first spatial derivative of a grid sampled magnitude containing random noise. Generalization to other flow magnitudes based on spatial derivatives is immediate. Been this a widely used method, the main objective of the study is to develop new filters from families already documented. The relevant performance parameters of these filters are evaluated and commented. Synthetic data fields are used to test the basic metrological attributes in a controlled way. As a result of the study, algorithms with better performances than the usual ones are proposed and strong points are highlighted. Finally, results of the application to real PIV data are exhibited and commented.     

e + e −→W − e + v and non-standard gauge couplings: Another look

The cross section for singleW ^? production ine ⁺ e ^? collisions is exactly computed for an arbitraryW magnetic moment. It is found that this process may give a first look at theW Wγ vertex just below the twoW threshold. A detailed comparison is made with previous calculations that used the equivalent photon approximation.     

Oxygen evolution on electrodes of different roughness: an electrochemical noise study

Rough and porous Ni layers have been obtained by cathodic deposition from a NiCl₂, NH₄Cl solution, at high current density. Characterisation by SEM has shown that they consisted of micro-dendrites separated by pores with a typical diameter of 1 m. In addition, circular hollows (10–100 m in diameter) were found on the deposit surface; their density varied with the deposition current density and deposition charge. The surface roughness of the Ni deposits, measured by EIS, was found to increase roughly linearly with the deposition charge, and to be little dependent on current density, provided a threshold value was exceeded. The oxygen evolution reaction has been studied on these electrodes by simultaneous real-time measurements of potential and electrolyte resistance fluctuations. The analysis of the electrochemical noise indicated that the dimensions of oxygen bubbles detaching from the electrodes slightly increased with the deposit surface roughness. It is not clear, however, whether or not this increase was associated with the effect of the small (1 m) or the large (10–100 m) features on the electrode-bubble interactions.     

Thermogravimetric Study of Tetrafunctional /Phenol Novolac Epoxy Mixtures Cured with a Diamine

The degradation behaviour of an epoxy system containing both tetraglycidyl-4-4′-diami-nodiphenylmethane (TGDDM) and a multifunctional novolac glycidyl ether resins, which are cured with 4,4′-diaminodiphenylsulphone (DDS) has been studied using thermogravimetric technique (TG). Isothermal and non-isothermal (dynamic) methods were used to determine the kinetic parameters of this system. An isothermal method and five dynamic methods reported in the literature were used to determine the activation energies of the system. Kissinger’s method only requires knowledge of the temperature at which the rate of weight loss is at maximum to calculate the activation energy. The Flynn-Wall-Ozawa method provides the activation energy without any assumption about the reaction order while the other three methods (Coats and Redfern, Horowitz and Metzger and Van Krevelen et al.) require a prior knowledge of the mechanism of degradation for this system to calculate the kinetic parameters. The results obtained by applying these different methods agreed well. In fact, the values of the activation energies provided by the six methods have shown excellent agreement when the degradation behaviour of this system was assumed to be of the deceleratory rate type. The kinetic parameters have been used to estimate the half-life of this system in two different ways.