Recovery and concentration of antioxidants from winery wastes

Grape and wine byproducts have been extensively studied for the recovery of phenolic compounds with antioxidant activity and a variety of biological actions. The selective recovery and concentration of the phenolic compounds from the liquid phase separated from further diluted winery wastes has been proposed. Adsorption onto non ionic polymeric resins and further desorption with ethanolic solutions was studied. Several commercial food grade resins were screened with the aim of selecting the most suited for the practical recovery of phenolic compounds with radical scavenging activity. Under the optimized desorption conditions (using Sepabeads SP207 or Diaion HP20 as adsorbents and eluting with 96% ethanol at 50 °C) a powdered yellow-light brown product with 50% phenolic content, expressed as gallic acid equivalents, was obtained. The radical scavenging capacity of one gram of product was equivalent to 2-3 g of Trolox.     

Separation of benzene from alkanes using 1-ethyl-3-methylpyridinium ethylsulfate ionic liquid at several temperatures and atmospheric pressure: Effect of the size of the aliphatic hydrocarbons

The ionic liquid 1-ethyl-3-methylpyridinium ethylsulfate, [EMpy][ESO₄], was studied for the separation of benzene from aliphatic hydrocarbons (octane or nonane) by solvent extraction through the determination of the (liquid + liquid) equilibrium (LLE) of the ternary systems: {octane (1) + benzene (2) + [EMpy][ESO₄] (3)} and {nonane (1) + benzene (2) + [EMpy][ESO₄] (3)} at T = (283.15 and 298.15) K and atmospheric pressure. Binodal curves were determined using the “cloud point” method, and tie-line compositions were obtained by density measurements. The values of selectivity and distribution coefficient, derived from the tie-line data, were used to decide if this ionic liquid can be used as potential solvent for the separation of benzene from aliphatic hydrocarbons using liquid extraction. These results were analyzed and compared to those previously reported for the systems {hexane + benzene + [EMpy][ESO₄]} and {heptane + benzene + [EMpy][ESO₄]}. The experimental results show that this ionic liquid is suitable for the extraction of benzene from mixtures containing octane and nonane. The consistency of tie-line data was ascertained by applying the Othmer–Tobias and Hand equations. The experimental results for the ternary systems were well correlated with the NRTL model. No literature data were found for the mixtures discussed in this paper.     

Separation of toluene from alkanes using 1-ethyl-3-methylpyridinium ethylsulfate ionic liquid at T = 298.15 K and atmospheric pressure

In this paper, the separation of toluene from aliphatic hydrocarbons (heptane, or octane, or nonane) was analyzed by solvent extraction with 1-ethyl-3-methylpyridinium ethylsulfate ionic liquid, [EMpy][ESO₄]. Liquid?liquid equilibrium (LLE) data for the ternary systems {heptane (1) + toluene (2) + [EMpy][ESO₄] (3)}, {octane (1) + toluene (2) + [EMpy][ESO₄] (3)}, and {nonane (1) + toluene (2) + [EMpy][ESO₄] (3)} were obtained by measurements at T = 298.15 K and atmospheric pressure. The selectivity, % removal of aromatic, and solute distribution ratio, obtained from experimental equilibrium results, were used to determine the ability of [EMpy][ESO₄] as a solvent. The degree of consistency of the experimental LLE values was ascertained using the Othmer–Tobias and Hand equations. The experimental results for the ternary systems were correlated with the NRTL model. Finally, the results obtained were compared with other ionic liquids and other solvents.     

Defective dicubane-like tetranuclear nickel(II) cyanate and azide nanoscale magnets

Four tetrameric nickel(II) pseudohalide complexes have been synthesized and structurally, spectroscopically, and magnetically characterized. Compounds 1-3 are isostructural and exhibit the general formula [Ni(2)(dpk·OH)(dpk·CH(3)O)(L)(H(2)O)](2)A(2)·2H(2)O, where dpk = di-2-pyridylketone; L = N(3)(-), and A = ClO(4)(-) for 1, L = NCO(-) and A = ClO(4)(-) for 2, and L = NCO(-) and A = NO(3)(-) for 3. The formula for 4 is [Ni(4)(dpk·OH)(3) (dpk·CH(3)O)(2)(NCO)](BF(4))(2)·3H(2)O. The ligands dpk·OH(-) and dpk·CH(3)O(-) result from solvolysis and ulterior deprotonation of dpk in water and methanol, respectively. The four tetramers exhibit a dicubane-like core with two missing vertexes where the Ni(II) ions are connected through end-on pseudohalide and oxo bridges. Magnetic measurements showed that compounds 1-4 are ferromagnetic. The values of the exchange constants were determined by means of a theoretical model based on three different types of coupling. Thus, the calculated J values (J(1) = J(2), J(3), and D) were 5.6, 11.8, and 5.6 cm(-1) for 1, 5.5, 12.0, and 5.6 cm(-1) for 2, 6.3, 4.9, and 6.2 cm(-1) for 3, and (J(1), J(2), J(3), and D) 6.9, 7.0, 15.2, and 4.8 cm(-1) for 4.     

Determination of inorganic elements in animal feeds by NIRS technology and a fibre-optic probe

In the present work we study the use of near infra-red spectroscopy (NIRS) technology together with a remote reflectance fibre-optic probe for the analysis of the mineral composition of animal feeds. The method allows immediate control of the feeds without prior sample treatment or destruction through direct application of the fibre-optic probe on the sample.The regression method employed was modified partial least squares (MPLS). The calibration results obtained using forty samples of animal feeds allowed the determination of Fe, Mn, Ca, Na, K, P, Zn and Cu, with a standard error of prediction (SEP(C)) and a correlation coefficient (RSQ) of 0.129 and 0.859 for Fe; 0.175 and 0.816 for Mn; 5.470 and 0.927 for Ca; 2.717 and 0.862 for Na; 4.397 and 0.891 for K; 2.226 and 0.881 for P; 0.153 and 0.764 for Zn, and 0.095 and 0.918 for Cu, respectively.The robustness of the method was checked by applying it to 10 animal feeds samples of unknown mineral composition in the external validation.     

Dinuclear Co(III)/Co(III) and Co(II)/Co(III) mixed-valent complexes: synthetic control of the cobalt oxidation level

The reactivity of cobalt(II) salts towards H(3)L (2-(2-hydroxyphenyl)-1,3-bis[4-(2-hydroxyphenyl)-3-azabut-3-enyl]-1,3-imidazolidine) was studied in different reaction conditions. Accordingly, the interaction of cobalt(II) acetate with H(3)L in methanol gives rise to the discrete complex [Co(III)(2)L(OAc)(2)(OMe)]*1.5H(2)O.MeOH, 1. Reaction of cobalt(II) acetylacetonate with H(3)L in the presence of dicarboxylic acids was also investigated. Thus, when cobalt(II) acetylacetonate and H(3)L are mixed with terephthalic or malonic acid in 4 : 2 : 1 molar ratios, the mixed valent [Co(II/III)(2)L(acac)(p-O(2)CC(6)H(4)CO(2)H)][Co(II/III)(2)L(acac)(OH)]*2H(2)O*2MeOH, 2 and [Co(II/III)(2)L(acac)(O(2)CCH(2)CO(2)H)][Co(II/III)(2)L(acac)(OH)]*7H(2)O, complexes are isolated. Decreasing the pH of the medium, by addition of a second mol of dicarboxylic acid, leads to [Co(II/III)(2)L(O(2)CCH(2)CO(2))(MeOH)]*2MeOH, 4, while the reaction with terephthalic acid does not proceed. 1, 2 and 4 were crystallographically characterised and all the complexes are dinuclear, with hydrogen bonds that expand the initial nodes. The magnetic characterisation, as well as the NMR spectroscopy, indicates a diamagnetic nature for 1, in agreement with the presence of Co(III), showing the aerial oxidation suffered by the cobalt(II) ions. Nevertheless, are paramagnetic. Temperature variable magnetic measurements were recorded for the crystallographically characterised complexes 2 and 4 and these studies confirm the mixed valence Co(II)/Co(III) nature of the compounds. The best fits of the magnetic data give an axial distortion parameter Delta = 628.7 cm(-1) for 2 and 698.8 cm(-1) for 4, and spin-orbit coupling constant lambda = -117.8 cm(-1) for 2 and -107.0 cm(-1) for 4. Therefore, this study shows that the oxidation degree of the initial cobalt(ii) salt by atmospheric oxygen can be controlled according to the pH of the medium.     

Synthesis and Characterization of Highly Water-Soluble Dendrofulleropyrrolidine Bisadducts with DNA Binding Activity

The synthesis, characterization and DNA binding studies of a series of polycationic fullerene adducts are reported. These cationic species, exhibiting reasonably high water solubility and a heterogeneous distribution of positive charges, can efficiently complex plasmid DNA. Electrophoresis studies show different DNA binding efficiencies for different adducts, some of which can be considered excellent candidates for DNA binding therapies.     

Surfactant-Oil-Water Systems Near the Affinity Inversion. XII. Emulsion Drop Size Versus Formulation and Composition

Emulsion drop size depends on the both formulation and composition of the surfactant-oil-water system, as well as on the stirring conditions prevailing during emulsification. General trends versus formulation or composition changes are presented. However, it is shown that the effects are not independent and that a proper combination of these parameters allows the attainment of very small drop size, even at low stirring energy. An overall phenomenology is presented on a two-dimensional formulation-composition map from which it is easy to select the best emulsification conditions.     

Determination and modelling of osmotic coefficients and vapour pressures of binary systems 1- and 2-propanol with CnMimNTf2 ionic liquids (n = 2, 3, and 4) at T = 323.15 K

The osmotic and activity coefficients and vapour pressures of binary mixtures containing 1-propanol, or 2-propanol and imidazolium-based ionic liquids with bis(trifluoromethylsulfonyl)imide as anion (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, C₂MimNTf₂, 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide, C₃MimNTf₂, and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, C₄MimNTf₂) were determined at T = 323.15 K using the vapour pressure osmometry technique. The experimental osmotic coefficients were correlated using the extended Pitzer model modified by Archer and the MNRTL model, obtaining standard deviations lower than 0.033 and 0.064, respectively. The mean molal activity coefficients and the excess Gibbs free energy for the mixtures studied were calculated from the parameters of the extended Pitzer model modified by Archer. Besides the effect of the alkyl-chain of the cation, the effect of the anion can be assessed comparing the experimental results with those previously obtained for imidazolium ionic liquids with sulphate anions.