Organic Dicarboxylate Negative Electrode Materials with Remarkably Small Strain for High‐Voltage Bipolar Batteries

As advanced negative electrodes for powerful and useful high‐voltage bipolar batteries, an intercalated metal–organic framework (iMOF), 2,6‐naphthalene dicarboxylate dilithium, is described which has an organic‐inorganic layered structure of π‐stacked naphthalene and tetrahedral LiO₄ units. The material shows a reversible two‐electron‐transfer Li intercalation at a flat potential of 0.8 V with a small polarization. Detailed crystal structure analysis during Li intercalation shows the layered framework to be maintained and its volume change is only 0.33 %. The material possesses two‐dimensional pathways for efficient electron and Li⁺ transport formed by Li‐doped naphthalene packing and tetrahedral LiO₃C network. A cell with a high potential operating LiNi_0.5Mn_1.5O₄ spinel positive and the proposed negative electrodes exhibited favorable cycle performance (96 % capacity retention after 100 cycles), high specific energy (300 Wh kg^?1), and high specific power (5 kW kg^?1). An 8 V bipolar cell was also constructed by connecting only two cells in series.     

pH-Dependent catalytic activity and chemoselectivity in transfer hydrogenation catalyzed by iridium complex with 4,4'-dihydroxy-2,2'-bipyridine

Transfer hydrogenation catalyzed by an iridium catalyst with 4,4'-dihydroxy-2,2'-bipyridine (DHBP) in an aqueous formate solution exhibits highly pH-dependent catalytic activity and chemoselectivity. The substantial change in the activity is due to the electronic effect based on the acid-base equilibrium of the phenolic hydroxyl group of DHBP. Under basic conditions, high turnover frequency values of the DHBP complex, which can be more than 1000 times the value of the unsubstituted analogue, are obtained (up to 81 000 h(-1) at 80 degrees C). In addition, the DHBP catalyst exhibits pH-dependent chemoselectivity for alpha,beta-unsaturated carbonyl compounds. Selective reduction of the C=C bond of enone with high activity are observed under basic conditions. The ketone moieties can be reduced with satisfactory activity under acidic conditions. In particular, pH-selective chemoselectivity of the C=O versus C=C bond reduction was observed in the transfer hydrogenation of cinnamaldehyde.     

A multi-analytical approach for the identification of aloe as a colorant in oil–resin varnishes

Aloe plants have been widely documented in artists’ treatises dating from the sixteenth to the nineteenth century as a source of colorant to achieve lustrous golden glazes on tin- and silver-foiled objects and warm-toned finishes on musical instruments, such as violins. Aloe extracts contain characteristic anthraquinone and phenolic components which impart a distinctive orange tone and fluorescence to mixtures containing them. Because of the low concentration of colorant in the coatings and its probable degradation by high temperature during manufacture, the identification of aloe in heated oil–resin mixtures represents an analytical challenge. For this reason, the possible presence of aloe in glazes and coatings has been largely overlooked. This paper describes various analytical approaches to the identification of aloe in historic samples, from comparison with results obtained from reference standards and mock-up samples. Complementary analytical techniques including thermally assisted hydrolysis and methylation–gas chromatography–mass spectrometry, high-performance liquid chromatography, laser desorption–mass spectrometry, matrix-assisted laser desorption-ionization-mass spectrometry and surface-enhanced Raman scattering were used. Different chemical markers were identified by the individual methods and the advantages and limitations of each technique for the identification of aloe in oil–resin varnishes are discussed.     

N-long-chain monoacylated derivatives of 2,6-diaminopyridine with antiviral activity

N-Monoacyl-2,6-diaminopyridines (2a-c) and N,N'-diacyl-2,6-diaminopyridines (3a-c) were synthesized from 2,6-diaminopyridine by acylation with the corresponding acyl halide or by dehydration with the corresponding carboxylic acid using 1,3-dicyclohexylcarbodiimide (DCC). The antiviral activities of N-monoacyl- and N,N'-diacyl-2,6-diaminopyridines (2a-c and 3a-c) were estimated using plaque reduction assay with HSV-1. All N-monoacyl derivatives (2a-c) showed significant anti-herpes simplex virus (HSV)-1 activity (EC(50) = 15.3-18.5 microg/ml). The CC(50) values of 2a-c measured using Vero cells ranged at 37.5-50.0 microg/ml. These compounds showed no significant antibacterial activities with Escherichia coli or Staphylococcus aureus even at a concentration of 1 mg/ml. The N,N'-diacyl derivatives (3a-c) showed no significant anti-HSV-1 activity.     

A study of novel heat-resistant polymers: Preparation of photosensitive fluorinated polybenzoxazole precursors and physical properties of polybenzoxazoles derived from the precursors

A series of novel photosensitive polybenzoxazole precursors were prepared from polycondensation of 2,2-bis(3,3′-amino-4,4′-hydroxyphenyl)hexafluoropropane with photosensitive dicarboxylic acid chlorides such as p-phenylenediacryloyl chloride and benzophenone-4,4′-dicarboxylic chloride. The precursors are soluble in common organic solvents owing to the presence of perfluoromethyl groups in the chain structure, and insolubilized in the solvents on irradiation with the light. Polybenzoxazole patterns with high resolution as well as high aspect ratio were reproduced by baking the precursor patterns at 300°C. The pattern shrinkage on the conversion to polybenzoxazole was slight. The polybenzoxazole films offered good heat-resistance up to 400°C in addition to good electrical properties.     

Microdetermination of fluorine in organic compounds by oxygen flask combustion and conductometric titration

For the conductometric titration of fluoride with calcium acetate, solvent system in sample solution and titrant, concentration, and acidity of sample solution were examined to establish the titration conditions. Results of these examinations were transferred to the microdetermination of fluorine in organic compounds using oxygen flask combustion method.Comparative examination between quartz and Pyrex flasks for the combustion of fluorine samples indicated that good results were obtained by the use of the former flask, whereas the use of the latter one gave negative values of 1.0–1.6% due to the formation of boron fluoride during the combustion.