Photoinduced intramolecular electron-transfer processes in [60]fullerene-(Spacer)-N,N-bis(biphenylyl)aniline dyad in solutions

Intramolecular photoinduced charge-separation and charge-recombination processes in a covalently connected C60-(spacer)-N,N-bis(biphenylyl)aniline (C60-spacer-BBA) dyad, in which the center-to-center distance of the electron acceptor and electron donor is 15 A, have been studied by time-resolved fluorescence and transient absorption methods. The observed low fluorescence intensity and the short fluorescence lifetime of the C60 moiety of the dyad in PhCN and THF indicate that charge separation takes place via the excited singlet state of the C60 moiety at a quite fast rate and a high efficiency. The nanosecond transient absorption spectra in PhCN and THF showed the broad absorption bands at 880 and 1100 nm, which were attributed to C60(*-)-spacer-BBA(*+). The charge-separated state decays with a lifetime of 330-360 ns in PhCN and THF at room temperature. From temperature dependence of the charge-recombination rate constants, the reorganization energy was evaluated to be 0.77-0.87 eV, which indicates that the charge-recombination process is in the inverted region of the Marcus parabola. With lowering temperature, the contribution of charge separation via the excited triplet state of the C60 moiety increases due to an increase in solvation of C60(*-)-spacer-BBA(*+).     

Preparation and Properties of Highly Oriented Sr0.3Ba0.7Nb2O6 Thin Films by a Sol-Gel Process

We succeeded in the preparation of epitaxial or highly oriented strontium-barium niobate (Sr_0.3Ba_0.7Nb₂O₆) thin film by a sol-gel process. A homogeneous coating solution was prepared with Sr and Ba acetates and Nb(OEt)₅ as raw materials, and acetic acid and diethylene glycol monomethyl ether as solvents. Sr_0.3Ba_0.7Nb₂O₆ film sintered at 900°C on MgO(1 0 0) was oriented with c-axis perpendicular to the substrate surface. Sr_0.3Ba_0.7Nb₂O₆ film sintered at 700°C on SrTiO₃(1 0 0) was an epitaxial and oriented with c-axis in parallel to the substrate surface. Transmittance of Sr_0.3Ba_0.7Nb₂O₆ film (film thickness: 144 nm) was more than 60% at the range from 400 to 800 nm. Refractive index was 2.33 at 633 nm. Dielectric constant and dielectric loss of the Sr_0.3Ba_0.7Nb₂O₆ thin films prepared on polycrystal Pt substrates were 600 and 0.06 at room temperature and 1 kHz, respectively. The curie temperature (T_c) of polycrystalline Sr_0.3Ba_0.7Nb₂O₆ thin films was about 200°C. At room temperature and 50 kHz, remanent polarization (P_r) and coercive field (E_c) of the polycrystalline thin films were 1.79 C/cm² and 2.69 kV/cm, respectively.     

External electric field effects on state energy and photoexcitation dynamics of diphenylpolyenes

External electric field effects on state energy and photoexcitation dynamics have been examined for para-substituted and unsubstituted all-trans-diphenylpolyenes doped in a film, based on the steady-state and picosecond time-resolved measurements of the field effects on absorption and fluorescence. The substitution dependence of the electroabsorption spectra shows that the dipole moment of the substituted stilbene in the Franck-Condon excited state becomes larger with increasing difference between the Hammet constants of the substituents. Fluorescence quantum yields of 4-(dimethylamino)-4'-nitrostilbene and 4-(dimethylamino)-4'-nitrodiphenylbutadiene are markedly reduced by an electric field, suggesting that the rates of the intramolecular charge transfer (CT) from the fluorescent state to the nonradiative CT state are accelerated by an external electric field. The magnitude of the field-induced decrease in fluorescence lifetime has been evaluated. The isomerization of the unsubstituted all-trans-diphenylpolyenes to the cis forms is shown to be a significant nonradiative pathway even in a film. Field-induced quenching of their fluorescence as well as field-induced decrease in fluorescence lifetime suggests that the trans to cis photoisomerization is enhanced by an electric field.     

Block catiomer polyplexes with regulated densities of charge and disulfide cross-linking directed to enhance gene expression

A block catiomer polyplex, showing a high stability in the extracellular medium and an efficient release of plasmid DNA (pDNA) in the intracellular compartment, was developed by controlling both the cationic charge and disulfide cross-linking densities of the backbone polycations. Poly(ethylene glycol)-poly(L-lysine) block copolymer (PEG-PLL) was thiolated using either of two thiolation reagents, N-succinimidyl 3-(2-pyridyldithio)propionate (SPDP) or 2-iminothiolane (Traut's reagent), to investigate the effects of both the charge and disulfide cross-linking densities on the properties of the polyplexes. The introduction of thiol groups by SPDP proceeded through the formation of amide linkages to concomitantly decrease the cationic charge density of PLL segment, whereas Traut's reagent promoted the thiolation with the introduction of cationic imino groups to keep the charge density constant. These thiolated PEG-PLLs were complexed with pDNA to form the disulfide cross-linked block catiomer polyplexes, which had the size of approximately 100 nm. Both thiolation methods were similarly effective in introducing disulfide cross-links to prevent the polyplex from the dissociation through a counter polyanion exchange in the extracellular oxidative condition. On the other hand, the efficient release of pDNA responding to the reductive condition mimicking the intracellular environment was only achieved for the polyplex thiolated with SPDP, a system compensating for the decrease in the charge density with the disulfide cross-linking. This distinctive sensitivity toward oxidative and reductive environments was nicely correlated with the remarkable difference in the transfection efficiency between these two types of thiolated polyplexes (SPDP and Traut's reagent types): the former revealed approximately 50 times higher transfection efficiency toward 293T cells than the latter. Obviously, the balance between the densities of the cationic charge and disulfide cross-linking in the thiolated polyplex played a crucial role in the delivery and controlled release of entrapped pDNA into the microenvironment of intracellular compartment to achieve the high transfection efficiency.     

Synthesis and properties of microgel bearing a mercapto group

Vinylbenzyl S-thioacetate ( 1 ) was prepared from thioacetic acid and chloromethylstyrene. Although bulk polymerization of 1 afforded a crosslinked polymer, solution polymerization in chlorobenzene afforded a corresponding soluble polymer. The S-thioacetate group did not react during the radical polymerization of 1 . Bulk copolymerization of 1 with styrene afforded a soluble copolymer when the feed ratio of 1 was lower than 30 mol %. Soap-free emulsion copolymerization of 1 , St, divinylbenzene, and 2-hydroxyethyl methacrylate (66 : 28 : 1 : 5) was carried out in water using 2,2′-azobis (N,N′-dimethyleneisobutyramidine) dichloride as an initiator to afford uniform spherical microgel 2 , whose average diameter was 135 nm. Aminolysis of 2 with an excess amount of butylamine in the presence of sodium tetrahydridoborate followed by treatment with hydrochloric acid resulted in complete removal of the acetyl group to give a slightly distorted spherical microgel (MG-SH) bearing mercapto group. The average diameter of MG-SH was 165 nm. Trans-esterification of p-nitrophenyl acetate ( 3 ) in the presence of triethylamine was efficiently accelerated by the addition of MG-SH. The radical polymerization of methyl methacrylate (MMA) in the presence of suspended MG-SH in chlorobenzene afforded the MMA-grafted microgel. Although MG-SH is a crosslinked gel, it acts as a soluble polymer bearing mercapto group. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1443–1451, 1997     

Photo-induced alignment of a photo-crosslinkable liquid-crystalline copolymer film by linearly polarized UV light

The anisotropic photoreaction of a liquid-crystalline (LC( copolymer comprising one co-monomer being anisotropically photo-crosslinkable by linearly polarized (LP( -UV light and the other being insensitive to UV-irradiation is presented. Polarized UV and IR studies suggested a photo-induced alignment of the mesogenic side groups during the LP-UV photoreaction at the LC temperature range of the copolymer. The direction of the aligned mesogenic groups is parallel to the electric vector of the incident LP-UV light and the induced birefringence is 0.07.     

Immobilization of cytochrome P-450 and electrochemical control of its activity

P-450_cam (camphor-induced cytochrome P-450) was immobilized on an indium tin oxide (ITO) electrode by polypyrrole and its activity was controlled electrochemically. The results showed that P-450_cam was immobilized on the ITO electrode without denaturing and the amount of P-450_cam could be easily controlled. When, the electric potential was swept repeatedly between 0.4 and 0 V, the remarkable decrease of oxygen in the reaction mixture solution was observed only in the presence of camphor. In addition, hydroxycamphor was detected only in the same system by means of gas chromatography/mass spectroscopy. These results suggested that immobilized P-450_cam catalyzed the hydroxylation of camphor by the supply of electron from the electrode. The effect of pH and ionic strength on the activity was examined, and it was found that the high activity expressed at the pH of 6.0 – 7.0 and KCl concentration of 0.1 – 0.2 M . The paper is the first report that P-450 enzyme activity could be controlled artificially. © 1998 John Wiley & Sons, Ltd.     

A laser-wire system for the international linear collider

A new laser-wire has been installed in the extraction line of the ATF at KEK. It aims at demonstrating that laser-wires can be used to measure micrometre scale beam size. In parallel, studies have been made to specify a laser suitable for the ILC laser-wires.      

Axinelloside A, an unprecedented highly sulfated lipopolysaccharide inhibiting telomerase, from the marine sponge, Axinella infundibula

Axinelloside A was isolated from the lipophilic extract of the Japanese marine sponge Axinella infundibula as a strong human telomerase inhibitor (IC(50) 2.0 microg/mL). It has the molecular weight of 4780.4 as the monoisotopic mass of the 19 sodium salt. The chemical structure was elucidated mainly by spectroscopic methods (2D NMR and MS). Axinelloside A consists of twelve sugars, e.g., a scyllo-inositol, a D-arabinose, 5 D-galactoses, and 5 L-fucoses, together with an (R)-3-hydroxy-octadecanoic acid, 3 (E)-2-hexadecenoic acids, and 19 sulfates.