Peroxyoxalate chemiluminescence detection of condensates of malondialdehyde with thiobarbituric acids using a flow system.

The peroxyoxalate chemiluminescence(CL) detection method for the evaluation of the CL intensity of malondialdehyde(MDA) condensates with seven 2-thiobarbituric acid derivatives is described. The method consists of a flow injection technique together with a CL detection system using bis(2,4,6-trichlorophenyl) oxalate(TCPO) and hydrogen peroxide as chemiluminogenic reagents. Linear correlations between CL intensity and concentration are obtained for pmol levels of condensates. Among the condensates, 1,3-diethyl-2-thiobarbituric acid(DETBA)-MDA shows the largest CL intensity. High performance liquid chromatography (HPLC)/CL detection of DETBA-MDA and 1,3-diphenyl-2-thiobarbituric acid(DPTBA)-MDA using a mixture of TCPO and hydrogen peroxide in acetonitrile as a postcolumn reagent solution is also described. The detection limits for DETBA-MDA and DPTBA-MDA are 20 and 200 fmol, respectively, per 20 microL injection at a signal-to-noise ratio of 2. This HPLC/CL detection system was applied to the determination of MDA in rat brains by using DETBA as a fluorescent derivatizing reagent.     

A fast atom bombardment mass spectrometric analysis of crown ether complexes [1]

Analyses of crown ether complexes of alkali metal ions and characterization of the complexes formed inm-nitrobenzyl alcohol have been carried out by fast atom bombardment (FAB) mass spectrometry. By using m-nitrobenzyl alcohol as a matrix for measurements, the stoichiometry of the complexes was assessed on the basis of the observed FAB peaks. In addition, the formation of crown ether-alkali metal complexes at a 2 : 1 molar ratio was enhanced by increasing the ionic radius of the metal ion in agreement with previous observations. On these grounds, FAB mass spectrometry may provide a rapid means for investigation of the complexation behavior of crown ethers and the stoichiometry of the complexes.     

Hetergeneous-nucleation synthesis of monodisperse ε-cobalt nanoparticles using palladium seeds

Monodisperse bimetallic Pd–Co nanoparticles were prepared via a thermal decomposition of cobalt carbonyl using palladium seeds at the Pd/Co molar ratios 0.5%, 1%, and 5%. The heterogeneously nucleated nanoparticles without any size-selective precipitation are sufficiently uniform to self-assemble into ordered arrays. The as-synthesized nanoparticles are each a single crystal with a complex cubic structure called ε-Co. The presence of Pd seeds seems to improve the stability of Co nanoparticles against oxidation based on the results from time-dependent magnetization measurement.     

Spin-relaxation and magnetoresistance in FM/SC/FM tunnel junctions

The effect of spin relaxation on tunnel magnetoresistance (TMR) in a ferromagnet/superconductor/ferromagnet (FM/SC/FM) double tunnel junction is theoretically studied. The spin accumulation in SC is determined by balancing of the spin-injection rate and the spin-relaxation rate. In the superconducting state, the spin-relaxation time τ_s becomes longer with decreasing temperature, resulting in a rapid increase of TMR. The TMR of FM/SC/FM junctions provides a useful probe to extract information about spin-relaxation in superconductors.     

Reaction kinetics and pathway of hydrothermal decomposition of aspartic acid

The kinetics and pathway of hydrothermal decomposition of aspartic acid were studied using a continuous‐flow tubular reactor. The reaction was carried out in the temperature range of 200–260°C and at a pressure of 20 MPa. Deamination was the primary reaction, indicated by the presence of significant amount of ammonia, fumaric acid, or maleic acid in the products. Other reaction products were pyruvic acid, malic acid, and traces of succinic and lactic acid. Traces of alanine were also detected, showing the possibility of decomposing high‐molecular weight amino acids to obtain simple amino acids such as glycine or alanine. Results on the effect of reaction parameters demonstrated that decomposition of aspartic acid is highly temperature dependent under hydrothermal conditions. For a slight temperature difference of 60°C (from 200 to 260°C), the first‐order reaction rate constants of 0.003 significantly increased to 0.231 s^?1. The activation energy was 144 kJ/mol, as calculated by the Arrhenius equation. No significant effect was exhibited by other reaction parameters such as pH and pressure. The results are useful in controlling the hydrolysis of proteinaceous materials toward high yield of aspartic acid under hydrothermal conditions. © 2007 Wiley Periodicals, Inc. 39: 175–180, 2007     

Method of observation of low density interface states by means of X-ray photoelectron spectroscopy under bias and passivation by cyanide ions

X-ray photoelectron spectroscopy (XPS) measurements under bias can observe low density interface states for metal-oxide-semiconductor (MOS) diodes with low densities. This method can give energy distribution of interface states for ultrathin insulating layers for which electrical measurements cannot be performed due to a high density leakage current. During the XPS measurements, a bias voltage is applied to the rear semiconductor surface with respect to the ∼3 nm-thick front platinum layer connected to the ground, and the bias voltage changes the occupation of interface states. Charges accumulated in the interface states shift semiconductor core levels at the interface, and thus the analysis of the bias-induced shifts of the semiconductor core levels measured as a function of the bias voltage gives energy distribution of interface states. In the case of Si-based MOS diodes, the energy distribution and density of interface states strongly depend on the atomic density of silicon dioxide (SiO₂) layers and the interfacial roughness, respectively. All the observed interface state spectra possess peaked-structures, indicating that they are due to defect states. An interface state peak near the Si midgap is attributable to isolated Si dangling bonds at the interface, while those above and below the midgap to Si dangling bonds interacting weakly with Si or oxygen atoms in the SiO₂ layers. A method of the elimination of interface states and defect states in Si using cyanide solutions has been developed. The cyanide method simply involves the immersion of Si in KCN solutions. Due to the high Si-CN bond energy of ∼4.5 eV, the bonds are not ruptured at 800 °C and upon irradiation. The cyanide treatment results in the improvement of the electrical characteristics of MOS diodes and solar cells.     

Adsorption of fission products onto soils using a fission multitracer

The adsorption behavior of fission products to various soils was studied using a multitracer. The multitracer was prepared by neutron irradiation of ²³⁵U. Distribution coefficients of fission products were obtained for seventeen kinds of Japanese soils. It was found that zirconium, niobium, and rare earth elements show high distribution coefficients for all soil samples, however, elements like alkali metals show varied values.