Proton Conduction at High Temperature in High-Symmetry Hydrogen-Bonded Molecular Crystals of RuIII Complexes with Six Imidazole-Imidazolate Ligands

A new H-bonded crystal [Ru^III(Him)₃(Im)₃] with three imidazole (Him) and three imidazolate (Im⁻) groups was prepared to obtain a higher-temperature proton conductor than a Nafion membrane with water driving. The crystal is constructed by complementary N−H⋅⋅⋅N H-bonds between the Ru^III complexes and has a rare Icy-c* cubic network topology with a twofold interpenetration without crystal anisotropy. The crystals show a proton conductivity of 3.08×10⁻⁵ S cm⁻¹ at 450 K and a faster conductivity than those formed by only HIms. The high proton conductivity is attributed to not only molecular rotations and hopping motions of HIm frameworks that are activated at ∼113 K, but also isotropic whole-molecule rotation of [Ru^III(Him)₃(Im)₃] at temperatures greater than 420 K. The latter rotation was confirmed by solid-state ²H NMR spectroscopy; probable proton conduction routes were predicted and theoretically considered.     

Linear polybiurets: Facile synthesis and characteristic properties

Linear polybiurets have been synthesized by polyaddition of benzyloxyamine and diisocyanates, and properties of the novel polymeric materials have been elucidated. Prior to polymerization, model reactions between benzyloxyamine and phenyl isocyanate were examined in detail and proved to be controlled by the molar ratio of reagents and by catalysts to give the urea (1:1 adduct) and/or biuret (1:2 adduct). Under appropriate conditions, the biuret was synthesized in a quantitative yield. Polymerization of equimolar amounts of benzyloxyamine and diphenylmethane or hexamethylene diisocyanate proceeded smoothly to give polybiurets with inherent viscosities up to 0.52 dL/g. The benzyl group of the model biuret and polybiuret could be removed by catalytic hydrogenation. Both the N-benzyloxy-type and N-hydroxy-type polybiurets showed excellent solubility in common organic solvents. The two kinds of polybiurets as well as model biurets adsorbed metal cations efficiently. The N-hydroxybiuret structure exhibited particularly high affinity for iron(III) and was useful for selective removal of iron from metal cation mixtures. © 1996 John Wiley & Sons, Inc.     

Effects of metal cation coordination on fluorescence properties of a diethylenetriamine bearing two end pyrene fragments

Fluorescence properties of a diethylenetriamine bearing two end pyrene fragments (L) have been studied in water, where effects of adding metal cations (Zn2+, Cd2+, Cu2+, Hg2+, Ag+) on the emission properties of L have been studied. Without metal cations, L shows dual-mode fluorescence consisting of monomer and excimer emissions. The monomer emission intensity (I(M)) is strong at acidic pH but decreases with a pH increase because of an electron transfer (ET) from the unprotonated nitrogen atoms to the excited pyrene fragment. The excimer emission is due to the static excimer formed via a direct photoexcitation of the intramolecular ground-state dimer (GSD) of the end pyrene fragments. The excimer emission intensity (I(E)) is weak at acidic pH but increases with a pH increase because of the GSD stability increase associated with the deprotonation of the polyamine chain. Addition of metal cations leads to I(M) decrease, where chelation-driven I(M) enhancement does not occur even with diamagnetic Zn2+ and Cd2+ at any pH. This is because a pyrene-metal cation pi-complex, formed via a donation of pi-electron of the pyrene fragment to the adjacent metal center, suppresses the monomer photoexcitation. I(E) also decreases upon addition of metal cations because the pyrene-metal cation pi-complex weakens pi-stacking interaction of the end pyrene fragments, leading to GSD stability decrease. The emission properties of L-Zn2+ complexes were studied by means of time-resolved fluorescence decay measurements, and the effects of adding a less-polar organic solvent were also studied to clarify the detailed emission properties.     

Synthesis of 2-azabicyclo[2.1.0]pentanes by the intramolecular nucleophilic substitution of cyclopropylmagnesium carbenoids with magnesium anilide

A variety of 2-azabicyclo[2.1.0]pentanes were synthesized by the intramolecular nucleophilic substitution of cyclopropylmagnesium carbenoids with magnesium anilide. The 1-chlorocyclopropyl p-tolyl sulfoxides possessing an N-aryl-substituted aminomethyl group were prepared from dichloromethyl p-tolyl sulfoxide, α,β-unsaturated carboxylic acid esters, and anilines in four steps. The deprotonation of the amine with t-BuMgCl followed by sulfoxide/magnesium exchange of the sulfoxides with i-PrMgCl led to the generation of the cyclopropylmagnesium carbenoids possessing a magnesium anilide moiety. Subsequent intramolecular nucleophilic substitution of the cyclopropylmagnesium carbenoids occurred in a 4-exo-tet manner to give the 2-azabicyclo[2.1.0]pentanes. The optically active 2-azabicyclo[2.1.0]pentane was synthesized using a p-tolylsulfinyl group as a chiral auxiliary.     

Assembly of a Benzo-Fused Bridged Ketone Scaffold from 1,5,10-Enediynes through One-Pot Ruthenium-Catalyzed Cyclization/Iodine-Mediated Oxidative Ring Expansion

In the presence of a cationic Ru catalyst, 1,6-diynes bearing a terminal styryl moiety underwent [2+2+2] cyclization to produce dehydrobiphenylenes fused with a five-membered ring. Although the cycloadducts were unstable toward purification, their one-pot iodine-mediated ring expansion successfully afforded unprecedented bridged ketone products containing a benzo-fused bicyclo[3.2.1] framework.     

Endo- and aminopeptidase activities of rat cathepsin H.

Employing soluble denatured protein substrates and their derivatives, the proteolytic activity of rat cathepsin H was investigated. The enzyme showed aminopeptidase activity which sequentially released amino acid from the N-terminal of the substrate. The aminopeptidase activity did not act on N alpha-acetylated peptides and showed moderate ionic-strength dependence when methionyl-methylcoumarylamide was employed as a substrate. These results indicate that the activity essentially requires an N-terminal free amino group of the substrate and recognizes it electrostatically to some extent. On the other hand, the enzyme was also indicated to exhibit endopeptidase activity by employing appropriate N alpha-acetylated peptide substrates. In contrast to the aminopeptidase activity, the endopeptidase activity showed rather strict specificity, preferring hydrophobic residues at P2 and P3 sites. Because of the broad specificity and high efficiency of the aminopeptidase activity, it was difficult to directly observe endopeptidase activity in the digestion of large peptide substrates with a free alpha-amino terminal. Thus, this is the first experimental evidence that indicates endopeptidase activity by assigning internal peptide bonds cleaved by this activity. From this data, we proposed a model of the binding site of this enzyme.     

Comparison of CO2 Reduction Performance with NH3 and H2O between Cu/TiO2 and Pd/TiO2

The aim of this study is to clarify the effect of doped metal type on CO₂ reduction characteristics of TiO₂ with NH₃ and H₂O. Cu and Pd have been selected as dopants for TiO₂. In addition, the impact of molar ratio of CO₂ to reductants NH₃ and H₂O has been investigated. A TiO₂ photocatalyst was prepared by a sol-gel and dip-coating process, and then doped with Cu or Pd fine particles by using the pulse arc plasma gun method. The prepared Cu/TiO₂ film and Pd/TiO₂ film were characterized by SEM, EPMA, TEM, STEM, EDX, EDS and EELS. This study also has investigated the performance of CO₂ reduction under the illumination condition of Xe lamp with or without ultraviolet (UV) light. As a result, it is revealed that the CO₂ reduction performance with Cu/TiO₂ under the illumination condition of Xe lamp with UV light is the highest when the molar ratio of CO₂/NH₃/H₂O = 1:1:1 while that without UV light is the highest when the molar ratio of CO₂/NH₃/H₂O = 1:0.5:0.5. It is revealed that the CO₂ reduction performance of Pd/TiO₂ is the highest for the molar ratio of CO₂/NH₃/H₂O = 1:1:1 no matter the used Xe lamp was with or without UV light. The molar quantity of CO per unit weight of photocatalyst for Cu/TiO₂ produced under the illumination condition of Xe lamp with UV light was 10.2 μmol/g, while that for Pd/TiO₂ was 5.5 μmol/g. Meanwhile, the molar quantity of CO per unit weight of photocatalyst for Cu/TiO₂ produced under the illumination condition of Xe lamp without UV light was 2.5 μmol/g, while that for Pd/TiO₂ was 3.5 μmol/g. This study has concluded that Cu/TiO₂ is superior to Pd/TiO₂ from the viewpoint of the molar quantity of CO per unit weight of photocatalyst as well as the quantum efficiency.     

Hyperpolarized 13C Magnetic Resonance Imaging of Fumarate Metabolism by Parahydrogen-induced Polarization: A Proof-of-Concept in vivo Study

Hyperpolarized [1-¹³C]fumarate is a promising magnetic resonance imaging (MRI) biomarker for cellular necrosis, which plays an important role in various disease and cancerous pathological processes. To demonstrate the feasibility of MRI of [1-¹³C]fumarate metabolism using parahydrogen-induced polarization (PHIP), a low-cost alternative to dissolution dynamic nuclear polarization (dDNP), a cost-effective and high-yield synthetic pathway of hydrogenation precursor [1-¹³C]acetylenedicarboxylate (ADC) was developed. The trans-selectivity of the hydrogenation reaction of ADC using a ruthenium-based catalyst was elucidated employing density functional theory (DFT) simulations. A simple PHIP set-up was used to generate hyperpolarized [1-¹³C]fumarate at sufficient ¹³C polarization for ex vivo detection of hyperpolarized ¹³C malate metabolized from fumarate in murine liver tissue homogenates, and in vivo ¹³C MR spectroscopy and imaging in a murine model of acetaminophen-induced hepatitis.     

Amplified Chirality Transfer to Aromatic Molecules through Non-specific Inclusion by Amorphous,Hyperbranched Poly(fluorenevinylene) Derivatives

Optically active, hyperbranched, poly(fluorene-2,4,7-triylethene-1,2-diyl) [poly(fluorenevinylene)] derivatives bearing a neomenthyl group and a pentyl group at the 9-position of the fluorene backbone at various ratios acted as a chirality donor (host polymers) efficiently included naphthalene, anthracene, pyrene, 9-phenylanthracene, and 9,10-diphenyanthracene as a chirality acceptor (guest molecules) in their interior space in film as well as in solution, with the guest molecules exhibiting intense circular dichroism through chirality transfer with chirality amplification. The efficiency of the chirality transfer was much higher with higher-molar-mass polymers than lower-molar-mass ones as well as with hyperbranched polymers compared to the analogous linear ones. The hyperbranched polymers include the small molecules in their complex structure without any specific interactions at various stoichiometries. The included molecules may have ordered intermolecular arrangement that may be somewhat similar to those of liquid crystals. Naphthalene, anthracene, and pyrene included in the polymer exhibited efficient circularly polarized luminescence, where the chirality was remarkably amplified in excited states, and anthracene exhibited especially high anisotropies in the emission on the order of 10⁻².