Effects of surfactants on microwave-assisted solid-state intercalation of poly(carbazole) in Bentonite

The present preliminary investigation reports, for the first time, the effects of typical cationic and anionic surfactants on the microwave-assisted solid-state intercalation and polymerization of carbazole (Cz) in the basal spacings of Bentonite. The intercalation of cetyl pyridinium chloride (CPCl), a cationic surfactant, and naphthalene sulfonic acid (NSA), an anionic surfactant, in Bentonite was carried out at two loadings—25 and 50 wt%—using microwave irradiation. The in situ polymerization of Cz was successfully carried out into the surfactant-modified galleries of Bentonite. This was confirmed by Gel permeation chromatography (GPC). The intercalation of poly(carbazole) (PCz) was confirmed by FT-IR, UV–Visible, and XRD analyses. Although polymerization was carried out in the solid-state, the UV–Visible spectra revealed the doped state of PCz and the presence of a charge carrier tail. The XRD studies showed that the increase in the height of the galleries was higher in case of Bentonite/CPCl/PCz nanocomposites as compared to Bentonite/NSA/PCz nanocomposites. It also revealed different orientations of the two surfactants in the galleries of the clay. The average particle size of Bentonite/CPCl/PCz (1:0.25:0.25) and (1:0.5:0.5) nanocomposites was found to be in the range of 25–35 and 50–60 nm, respectively. The Bentonite/NSA/PCz (1:0.25:0.25) and (1:0.5:0.5) nanocomposites showed the average particle size in the range of 20–30 nm and 40–50 nm, respectively. The results revealed that both cationic and anionic surfactants strongly influenced the morphology of Bentonite/PCz nanocomposites. The difference in the mechanisms of solid-state intercalation of PCz in the presence of these surfactants has been proposed.     

Alkaline phosphatase assay using a near-infrared fluorescent substrate merocyanine 700 phosphate

Alkaline phosphatase (ALP) is a phosphomonoester hydrolase that is commonly used as a conjugating enzyme in biological research. A wide variety of substrates have been developed to assay its activity. In this study, we developed an ALP assay method utilizing merocyanine 700 (MC700) based substrate MC700 phosphate (MC700p). MC700 is a near-infrared fluorescent merocyanine dye, and has excitation/emission maxima at 686 nm/722 nm in ALP assay buffer. Upon hydrolysis by ALP, MC700p is converted to MC700. The fluorescence of MC700 is dependent on the pH and detergent concentration in the buffer. The fluorescence signal produced by MC700p hydrolysis is linearly related to the ALP amount and substrate concentration. A stop solution containing EDTA could be used to stop the ALP/MC700p reaction. It was also demonstrated that MC700p could substitute pNpp as the ALP substrate in a commercial 17β-Estradiol enzyme immunoassay kit.     

Reply to query related to “Study of uranium contamination of ground water in Punjab state in India using X-ray fluorescence technique”

The queries made by Rathore in the preceding Letter to Editor (J Radioanal Nucl Chem, 2013) regarding the “Studies of ground water contamination in Punjab state in India using X-ray fluorescence technique” by Alrakabi et al. (J Radioanal Nucl Chem 294:221–227, 2012. doi: 10.1007/s10967-011-1585-x), are responded. The points raised by Rathore are important in case of sensitive analytical techniques, where only a small fraction (~few hundred μL of water) of the water sample collected in the container is effectively used as analyte. The biasing due to chemical speciation and physical escape of element of interest becomes significant in such rapid techniques if the ionic species of interest in the analyte are not stabilised using suitable additives. In the reported study based on X-ray fluorescence technique, the analyte used for elemental analysis was obtained by drying about 500–1000 mL of water sample. Adequate precautions were taken to minimize possibility of element of interest to escape or adhere to the bottle surface or lost as residue. The onsite acidification of collected water sample to pH 1 with reagent-grade nitric acid for sample preservation is not a pre-requisite in the procedure followed. The contribution of particulate matter to the reported concentrations of uranium was estimated to be insignificant. Also, the query related to effect of co-precipitation of uranium with formation of CaF₂ is found to be inconsequential. The comment made by Rathore (J Radioanal Nucl Chem, 2013) stating that ‘proceeding further in the measurement of uranium is a waste of time and has no meaning and results and discussion have no meaning too’ is extraneous.     

Effect of Distortions on an Annular Optical Fiber Waveguide

We present the modal analysis and dispersion curves of some asymmetric annular optical-fiber waveguides. The proposed cross-sections can be conceived as having the shape of a distorted annular circular waveguide and leads to a tolerance study of deformation in an annular optical-fiber waveguide. We obtain mathematical expressions for the modes of the proposed waveguides using boundary matching techniques under some logical assumptions. We observe that the proposed distortions are able to tune the cutoff values of annular circular waveguide at desired levels.     

Production and Characterization of the Exopolysaccharides Produced by Agaricus brasiliensis in Submerged Fermentation

The aim of the work was to study the production of the exopolysaccharides by Agaricus brasiliensis and the isolation of exopolysaccharides (EPSs) with biological effects. A brasiliensis LPB03 was cultured in submerged fermentation in a medium containing glucose, yeast extract, hydrolyzed soybean protein, and salts (pH 6.1) at 29 degrees C and 120 rpm for 144 h. The maximum biomass and EPS yield was 7.80 +/- 0.01 and 1,430.70 +/- 26.75 mg/L, respectively. To isolate the produced EPSs, two methods were compared: (1) with alcohol precipitation and (2) treatment with tricloroacetic acid (TCA), followed by alcohol precipitation. The use of TCA facilitated the purification of the EPS, reducing the amount of the contaminant soy proteins. For monosaccharide identification, the EPSs were hydrolyzed, derivatized to alditol acetates, and analyzed by gas chromatography (GC) and GC-mass spectrometry, which showed the presence (in molar percentage) of mannose (58.7), galactose (21.4), and glucose (13.1) as major sugars, with lower amounts of rhamnose (3.9) and xylose (2.8). Scanning electron microscopy was used to observe the morphological structure of the EPS. The experiments in vivo including EPS in the mice diet during 8 weeks indicated the hipocholesteremic and hypoglycemic effects.     

ZnO-Au nanohybrids by rapid microwave-assisted synthesis for CO oxidation

We present a green method for the synthesis of ZnO-Au hybrids using an ultrafast microwave-based technique. This method provides good control over the nucleation of the metal nanoparticles on the oxide support, which governs the morphology and microstructure of the hybrids. The hybrids exhibit good catalytic activity for CO oxidation compared to similar hybrids reported in the literature. Detailed XPS investigation reveals the presence of Au-Zn and Au-O bonds at the interface. This surface doping leads to the formation of anionic and cationic Au sites that contribute to the enhanced activity. Our method is general and can be applied for designing other supported catalysts with controlled interfaces.     

Kinetic resolution of amines via dual catalysis: remarkable dependence of selectivity on the achiral cocatalyst

A dual-catalysis/anion-binding approach with a chiral hydrogen bonding (HB) catalyst and an achiral nucleophilic cocatalyst was applied to the kinetic resolution of amines. Out of a structurally diverse collection of 22 nucleophilic species, 4-di-n-propylaminopyridine emerged as the most efficient cocatalyst, allowing for the kinetic resolution of benzylic amines with s-factors of up to 67.     

Rational design of small molecule inhibitors targeting RhoA subfamily Rho GTPases

Rho GTPases have been implicated in diverse cellular functions and are potential therapeutic targets. By virtual screening, we have identified a Rho-specific inhibitor, Rhosin. Rhosin contains two aromatic rings tethered by a linker, and it binds to the surface area sandwiching Trp58 of RhoA with a submicromolar Kd and effectively inhibits GEF-catalyzed RhoA activation. In cells, Rhosin specifically inhibited RhoA activity and RhoA-mediated cellular function without affecting Cdc42 or Rac1 signaling activities. By suppressing RhoA or RhoC activity, Rhosin could inhibit mammary sphere formation by breast cancer cells, suppress invasion of mammary epithelial cells, and induce neurite outgrowth of PC12 cells in synergy with NGF. Thus, the rational designed RhoA subfamily-specific small molecule inhibitor is useful for studying the physiological and pathologic roles of Rho GTPase.     

Study of uranium contamination of ground water in Punjab state in India using X-ray fluorescence technique

The elemental concentration of uranium in the samples collected from the ground water and the canal water in the Bathinda district of Punjab state, India, have been investigated using X-ray fluorescence technique. The residues obtained after drying the water samples were analysed using the energy dispersive X-ray fluorescence spectrometer consisting of Mo-anode X-ray tube equipped with selective absorbers as an excitation source and an Si(Li) detector. The uranium concentration values in significant fraction of the shallow ground water samples from the hand pumps is found to be above the permissible level of 15?ppb recommended by World Health Organisation for the drinking water, and its values in the canal water samples are below 5?ppb. To investigate the flyash from the coal-fired thermal power plants as a possible source of ground water contamination, the water samples collected from the surroundings of the power plants and the flyash samples were also analyzed. The results rule out flyash as a source of uranium contamination. Agrochemical processes occurring in the calcareous soils in the region are the favoured potential source of uranium contamination of the ground water.     

A Statistical Approach for Optimization of Polyhydroxybutyrate Production by Bacillus sphaericus NCIM 5149 under Submerged Fermentation Using Central Composite Design

The aim of this work was to statistically optimize the cultural and nutritional parameters for the production of polyhydroxybutyrate (PHB) under submerged fermentation using jackfruit seed hydrolysate as the sole carbon source. On the basis of results obtained from “one variable at a time” experiment, inoculum age, jackfruit seed hydrolysate concentration, and pH were selected for response surface methodology studies. A central composite design (CCD) was employed to get the optimum level of these three factors to maximize the PHB production. The CCD results predicted that jackfruit seed hydrolysates containing 2.5% reducing sugar, inoculum age of 18 h, and initial medium pH 6 could enhance the production of PHB to reach 49% of the biomass (biomass 4.5 g/l and PHB concentration 2.2 g/l). Analysis of variance exhibited a high coefficient of determination (R ²) value of 0.910 and 0.928 for biomass and PHB concentration, respectively, and ensured that the quadratic model with the experimental data was a satisfactory one. This is the first report on PHB production by Bacillus sphaericus using statistical experimental design and RSM in submerged fermentation with jackfruit seed hydrolysate as the sole source of carbon.