Dispersion state of CuO on CeO2

XRD and XPS are used to study the dispersion state of CuO on ceria surface. The dispersion capacity values of CuO measured by the two methods are consistent, which are of 1.20 mmol CuO/100 m² CeO₂. In addition, the results reveal that highly dispersed Cu²⁺ ions are formed at low CuO loadings and that increasing the CuO content to a value higher than its dispersion capacity produces crystalline CuO after the surface vacant sites on CeO₂ are filled. The atomic composition of the outermost layer of the CuO/CeO₂ samples has been probed by using static secondary ion mass spectroscopy (SSIMS), and the ratim of Cu/Ce are found to be 0.93 and 0.46 for the 1.22 and 0.61 mmol CuO/CeO₂ samples respectively. Temperature-programmed reduction (TPR) profile with two reduction peaks at 156 and 165°C suggests that the reduction of highly dispersed Cu²⁺ ions consists of two steps and is easier than that of CuO crystallites, in which the TPR profile has only one reduction peak at about 249°C. The above experimental results are in good agreement with the prediction of the incorporation model. Project supported by the National Natural Science Foundation of China.     

Synthesis and Characteristics of a New Fluorogenic Substrate for Horseradish Peroxidase

N,N′-Dicyanomethyl-o-phenylenediamine was synthesized with a 90% yield by a reaction ofo-phenylenediamine with chloroacetonitrile in triethylamine. Our experimental results showed that it was the effective fluorogenic substrate for horseradish peroxidase (HRP) and hemin. TheK_mfor the HRP system was 48 μM,and that for hemin was 1.3 μM.Properties of the substrate were evaluated from the detection limits of enzymes and H₂O₂. The linear ranges for the determination of HRP and hemin were 21–150 pMand 2–20 nM,respectively. The linear range for the determination of H₂O₂using HRP or hemin was 18–140 and 60–1000 nM,respectively. The structural elucidation of the fluorescent product using NMR and mass spectral techniques was proposed to be 1,2-dihydro-2-imido-imidazo[1,2-a] quinoxaline. Based on the product structure and earlier reports, the possible reaction mechanism of HRP and the substrate was also proposed, i.e., two steps for ring closures, one step of isomerization, and a final step of oxidative dehydrogenation.     

Self-gelatinizable copolymer immobilized glucose biosensor based on prussian blue modified graphite electrode

A novel poly(vinyl alcohol) grafting 4-vinylpyridine self-gelatinizable copolymer was adapted to immobilize glucose oxidase. The reduction of hydrogen peroxide (H2O2) was detected at a Prussian Blue (PB) modified graphite electrode. A stable and sensitive glucose amperometric biosensor is described. The copolymer is a good biocompatible polymer in which the glucose oxidase retains high activity. Moreover, the copolymer can adhere firmly to the inorganic PB membrane. The sensor showed an apparent Michaelis-Menten constant of 18 +/- 0.2 mM and a maximum current density of 1.14 microA cm-2 mM-1. The linear range is from 5 microM to 4.5 mM glucose and the detection limit is 0.5 microM glucose. The catalytic efficiency of PB for the reduction of H2O2 is higher than that for the oxidation of H2O2. Glucose concentrations in serum samples from healthy persons and diabetic patients were determined using the sensor. The results compared well with those provided by the hospital using a spectroscopy method.     

A New Approach to α—Bromochalcones

α-Bromo benzolymethylene triphenylphosphorane 3 has been synthesized by the reaction of benzoylmethylene triphenylphosphorane 1 with N-bromosuccinimide in the yield of 87% and can react with aromatic aldehydes 4 to give α-bromochalcones 5 in good yields.     

Synthesis of (4S,9aS)-hexahydro-4-methyl-1H,5H-pyrrolo[2,1-c][1,4]-thiazepine-1,5-dione,A potent angiotensin converting enzyme inhibitor

Synthesis of (4S,9aS)-hexahydro-4-methyl-1H,5H-pyrrolo[2,1-c][1,4]thiazepine-1,5-dione, an orally active potent angiotensin converting enzyme inhibitor is described.     

Ring closure reaction of 4-(2-hydroxyanilino)-2-phenyl-5-pyrimidinecarboxylic acid with acetic anhydride. Synthesis of pyrimido[5,4-c] [1,5]benzoxazepin-5(11H)ones

Syntheses of 11-acety1-2-phenylpyrimido[5,4-c][1,5]benzoxazepin-5(11H)one ( 16a ) and analogs ( 16b,c, 22 ) were described. The reaction of 4-chloro-2-phenyl-5-pyrimidinecarboxylic acid ethyl ester ( 7 ) with 2-aminophenol afforded 4-(2-hydroxyanilino)-2-phenyl-5-pyrimidine-carboxylic acid ethyl ester ( 8a ). The latter was also prepared by catalytic reduction of 4-(2-nitrophenoxy)-2-phenyl-5-pyrimidinecarboxylic acid ethyl ester ( 9 ), which was obtained from 7 and 2-nitrophenol. Involvement of 4-(2-aminophenoxy)-2-phenyl-5-pyrimidinecarboxylic acid ethyl ester ( 12a ) in this reduction as an intermediate was demonstrated by an independent synthesis of 12a and its subsequent rearrangement to 8a. Hydrolysis of 8a or 12a gave 4-(2-hydroxyanilino)-2-phenyl-5-pyrimidinecarboxylic acid ( 15a ). Reaction of 15a with acetic anhydride afforded 16a , the first member of a novel ring system, the pyrimido[5,4- c ][1,5]-benzoxazepin. Additional examples ( 16b,c ) were prepared similarly. The corresponding 11-ethyl derivative ( 22 ) was prepared in similar fashion, starting with 7 and 2-ethylaminophenol. A possible reaction mechanism for the formation of 16a-c from 15a-c and acetic anhydride was discussed.     

Synthesis of 2-(α-Hydroxyalkyl)-2-Oxazoline under Microwave Irradiation in Bluk

Four 2-(α-hydroxyalkyl)-2-oxazolines and a 2-(α-hydroxy-α,α-diphenyl)-2-benzooxazole were synthesized from β-amimoalcohols and α-hydroxy carboxylic acids under microwave irradiation in the absence of a solvent.     

A nafion/crown ether film electrode and its application in the anodic stripping voltammetric determination of traces of silver

Glassy carbon electrodes are modified by coating with dicyclohexyl-18-crown-6 in Nafion-117. The electrode is used for a very sensitive anodic stripping voltammetric determination of silver. High sensitivity is obtained owing to the release of crown molecules from the silver-crown complex during the deposition. The detection limit is 2×10^?12 M after electrodeposition for 30 min. The recommended supporting electrolyte is 4×10^?3–7×10^?3 M potassium chloride in 0.01 M nitric acid with a deposition potential of ?0.30 V vs. SCE and a linear potential scan. Three typical calibration graphs were linear over the range 2×10^?11–1×10^?8 M for deposition times of 30, 20 and 8 min, respectively. The silver content of reagent-grade ammonium nitrate was found to be 0.48×10^?4% with a relative standard deviation of 3.7% (n=7) for parallel determinations.     

Direct STM investigation of cinchona alkaloid adsorption on Cu(III)

Scanning tunneling microscopy (STM) combined with cyclic voltammetry has been employed to investigate the adsorption of cinchonine on Cu(111). Similar to cinchonidine, cinchonine forms a long-range ordered adlayer with (4 x 4) symmetry on the substrate. The structural details on molecular adsorption were obtained by high-resolution STM images. On the basis of the previous results and obtained STM images, the quinoline ring is proposed to lie parallel to Cu(111) and serve as an anchoring group. The chiral quinuclidine moiety extends out of the surface to facilitate the interaction with the prochiral reactants.