高稳定性CaO-ZrO2固体碱催化剂的表征和催化性能

用共沉淀法经高温焙烧制备了CaO摩尔分数从10%至50%的CaO-ZrO₂系列催化剂, 将其应用于碳酸丙烯酯和甲醇酯交换合成碳酸二甲酯过程, 并通过XRD, FT-IR, BET, ICP, CO₂-TPD, XPS等表征手段研究了催化剂的物性及其催化性能随组成变化的的规律. 结果表明, 当CaO摩尔分数高于30%时, 表面出现游离的CaO, 虽然具有强碱性和高活性, 但是稳定性差; 而当CaO摩尔分数低于30%时, Ca^2＋进入ZrO₂晶格, CaO与ZrO₂形成连续固溶体, 并且随着CaO含量的增加, 晶格氧的电荷密度增加, 催化剂的碱性增强, 使得CaO-ZrO₂催化剂在碳酸丙烯酯和甲醇酯交换合成碳酸二甲酯过程中获得了高活性和高稳定性.     

铁轴草中Teucvidin的衍生物研究

从唇形科植物铁轴草中分离得去甲克罗烷二萜化合物Ｔｅｕｃｖｉｄｉｎ，通过催化氢化、酯交换、水解等反应合成了８个衍生物，用＾１ＨＮＭＲ、ＭＳ和ＩＲ确定了其结构，初步生物活性测定结果表明，化合物Ⅱ和Ⅳａ的拒食作用显著。     

N—乙基—α—甲基—间（三氟甲基）苯乙胺的合成

本文报道了一种新的简便的合成Ｎ－乙基α－甲基－间苯乙胺的方法。方法以三氟甲苯为原料，经氯甲基化，Ｇｉｇｎａｒｄ及Ｌｅｕｃｋａｒｔ反应后得目标物，具有原料价廉易得，毒性较小，反应条件温和，工艺流程较短等特点。     

A direct synthesis of denbinobin

Denbinobin was made in seven steps from quinone 3. The cyclization of aldehyde 12 using P₄-tBu and the oxidation of a hindered alcohol with MnO₂ were key steps.     

光学活性含硅氨基酸的合成

光学纯的硅取代氨基酸是一类非天然的手性氨基酸合成子，在药物，植物保护 剂和精细化学品的合成具有极为广阔的应用前景，其合成方法包括化学不对称合成 及化学合成外消旋体－生物学拆分两种，综述了该方面的研究进展。     

Determination of trace rhodium by supramolecular catalytic kinetic spectrofluorimetry of β-CD-rhodium-KBrO3-vanillin salicylhydrazone

A sensitive catalytic kinetic spectrofluorimetric approach for determining ng mL⁻¹ levels of rhodium is presented, and the possible mechanism of the catalytic reaction was investigated. The determination is based on the catalytic property of rhodium to enhance the reaction of o-vanillin salicylhydrazone (OVSH) with potassium bromate in a water-ethanol medium at pH 4.80 and 45 °C. The presence of β-cyclodextrin (β-CD) obviously sensitized the assay due to its high inclusion ability towards OVSH. Under optimized experimental conditions, fluorescence measurements of the β-CD-rhodium-KBrO₃-OVSH catalytic kinetic reaction system were carried out in its fluorescent band centered at λ_ex = 333 nm and λ_em = 476 nm, respectively. The calibration graph was linear over the concentration range of 0.47–100 ng mL⁻¹ with a detection limit of 0.14 ng mL⁻¹. The effect of interferences was discussed, and the results show that the extraction method can be used to separate rhodium from interference species such as iridium. The proposed method, applied to several synthetic mixtures containing rhodium mixed with varying amounts of metal salts, produced satisfactory results.     

Resonance Rayleigh scattering determination of trace amounts of Al in natural waters and biological samples based on the formation of an Al(III)-morin-surfactant complex

A novel method for the determination of trace amounts of Al(III) based on resonance Rayleigh scattering (RRS) has been developed. In the presence of some surfactants, Al(III) can react with morin and form an Al(III)-morin-surfactant complex, which results in the enhancement of RRS intensity and the appearance of the corresponding RRS spectral characteristics. Their maximum scatter peaks are at 476 nm for the cetyltrimethylammonium bromide (CTAB) system, 489 nm for the cetylpyridinium chloride (CPC) system, 474 nm for the Triton X-100 system, and 473 nm for the Tween-20 system. The enhanced RRS intensity is directly proportional to the concentration of Al(III). The detection limits are in the range of (0.50-1.2)×10⁻⁷ mol l⁻¹ depending on the surfactant. The characteristics of RRS spectra of the complexes, the optimum conditions of these reactions and the influencing factors have been investigated. The method has high selectivity, and was successfully applied to the determination of Al(III) in natural and biological samples. Furthermore, according to different complexation capacity of Al(III)-morin-CTAB system under two pH conditions, speciation analysis of Al(III) in natural waters was explored. The labile monomeric Al fraction (mainly inorganic Al, Al_i) is determined at acidic pH and the total monomeric Al fraction (Al_a) is determined at alkaline pH. The results are in agreement with those obtained by Driscoll’s 8-hydroxyquinoline extraction-ion exchange method.     

First total synthesis of a GPI-anchored peptide

A GPI-anchored dipeptide of sperm CD52 antigen was prepared through a convergent synthesis. First, the dipeptide with its C-terminus free and the GPI with its nonreducing end phosphoethanolamine bearing a free amino group were synthesized separately. Then, the two building blocks were coupled with use of EDC/HOBt as the condensation reagent. Finally, the GPI-anchored peptide was deprotected to give the target molecule 1.     

Selective bonding of pyrazine to silicon(100)-2x1 surfaces: the role of nitrogen atoms

The covalent binding of pyrazine on Si(100) have been investigated using high-resolution electron energy loss spectroscopy (HREELS) and x-ray photoelectron spectroscopy. Experimental results clearly suggest that the attachment occurs exclusively through the bonding of the two para-nitrogen atoms with the surface without the involvement of the carbon atoms, as evidenced from the retention of the (sp2) C-H stretching mode in HREELS and a significant down shift of 1.6 eV in the binding energy of N 1s. The binding mechanism for pyrazine on Si(100) demonstrates that reaction channels for heteroatomic aromatic molecules are strongly dependent on the electronic properties of the constituent atoms.     

Bis[bis­(methoxy­carbimido)amine‐κ2N,N′]bis­(perchlorato‐κO)copper(II) bis­[bis­(methoxy­carbimido)amine‐κ2N,N′]bis­(methanol‐κO)copper(II) bis­(perchlorate) methanol disolvate

The title compound, [Cu(ClO₄)₂(C₄H₉N₃O₂)₂][Cu(C₄H₉N₃O₂)₂(CH₄O)₂](ClO₄)₂·2CH₃OH, comprises two independent Cu^II species lying on different inversion sites. In the Cu complexes, a distorted octa­hedral geometry arises (from basic square‐planar N₄ coordination) from the weak coordination of two perchlorate ions (as Cu—O) in one species and two methanol mol­ecules in the other (also as Cu—O). Inter­actions between the O atoms of the perchlorate anions or methanol groups and the imide or amine NH groups afford an extensive inter­molecular hydrogen‐bonding network.