Hamiltonian formulation of generalized quantum dynamics

The Hamiltonian formulation of the usual complex quantum mechanics in the theory of generalized quantum dynamics is discussed. After the total trace Lagrangian, total trace Hamiltonian and two kinds of Poisson brackets are introduced, both the equations of motion of some total trace functionals which are expressed by total trace Poisson brackets and the equations of motion of some operators which are expressed by the without-total-trace Poisson brackets are obtained. Then a set of basic equations of motion of the usual complex quantum mechanics are obtained, which are also expressed by the Poisson brackets and total trace Hamiltonian in the generalized quantum dynamics. The set of equations of motion are consistent with the corresponding Heisenberg equations. Project supported by Prof. T.D. Lee’s NNSC Grant, the National Natural Science Foundation of China, the Foundation of Ph. D. Directing Programme of Chinese University, and the Chinese Academy of Sciences.     

气-固流化床反应器内双流体力学模型及其验证 Ⅱ.单组分两维射流床内流场特性分析

由以质量、动量和能量三大守恒定律为基础的湍流两相流理论出发,建立了描述气固流化床内两相流动的数学模型;在微型计算机上编写了相应的数值计算和图形处理程序;为了验证模型的可靠性,本文着手模拟与分析了单组分颗粒体系两维射流流化床内气、固相速度场、空隙度和压力场随时间、空间变化规律;得到了与前人实验结果相吻合的结论。     

（±）—Salvinolone的全合成研究

以２－（３，４－环己基类二氧－５－异丙基）苯基乙醇（２）和３－异丙氧基－５，５－二甲基－１，３－环己烯酮（４）为原料，利用羰基α－位的烷基化反应和分子内的Ｆｒｉｅｄｅｌ－Ｃａｒｆｔｓ反应为关键步骤，经９步反应，合成了多氧芳香型三环二萜类天然产物Ｓａｌｖｉｎｏｌｏｎｅ。     

过硫酸铵水溶液对聚乙烯表面作用的研究

本文利用X光电子能谱(XPS)及其它技术对过硫酸铵水溶液处理聚乙烯表面改进粘合性的作用机理进行了研究。结果表明,过硫酸铵的氧化作用使聚乙烯表面引入酮、醛、羧基等含氧基团,使其粘合强度显著提高。高密度聚乙烯表面的氧化深度小于40,低密度聚乙烯的均匀氧化深度在40—90之间。处理后的聚乙烯表面未发现明显的交联产物。     

电镀烧结法制备Ti/SnO2-Sb2O4电极的研究

The Ti/SnO₂-Sb₂O₄ electrode has been prepared by the electroplate-sinter method. The effect of SbCl₃ adding amount and sintering temperature on its electrode lifetime and oxygen evolution potential were investigated by means of EDX, SEM and XRD analysis. The results indicated that the electrode appeared the best performance when the SbCl₃ adding amounts was 0.2g and the sintering temperature was 550℃. In optimized conditions Ti substrate was entirely covered by SnO₂-Sb₂O₄ and the combinations among them were tight. Due to the use of electroplate method, the electrical conductivity, the oxygen evolution potential and the electrode lifetime were increased, so the elec-tro-catalytic activity and the electrochemical stability of the prepared electrode were found to be superior.     

二、三分枝甘露糖簇衍生物的合成

采取一种有效途径合成了二、三分支的甘露糖簇分子．甘露糖经烯丙苷化、乙 酰基保护后，将其烯丙基的双键氧化得到带有羧基连接臂的甘露糖衍生物，然后再 分别与l，6-己二胺和三(2-氨乙基)胺进行缩合反应，最后脱掉保护基，得到二分 枝甘露糖簇化合物6和三分枝甘露糖簇化合物8．     

meso-四(对烷氧苯基)卟啉金属配合物的合成和性能研究(Ⅳ)

合成了系列卟啉乙酸合锰配合物9个,其中6个为未见文献报道的新化合物.用UV,1HNMR,IR,MS,元素分析等表征确证了配合物的结构,总结了锰与卟啉类配体配合的IR,UV,1H NMR判据.采用差示扫描量热法(DSC)和偏光显微镜(PM)研究了该系列配合物的液晶性能,发现8个配合物具有液晶性.考察了烷氧基链长、配位金属离子和分子空间结构对液晶性能的影响.     

A Two-dimensional Lanthanide Coordination Framework with a New Amide-type Tripodal Ligand, 2,2′,2＂-Nitrilotris{[（2′- benzylaminoformyl）phenoxy]ethyl}amine

The La(III) complex with a new amide‐type tripodal ligand,2,2′.2″‐nitrilotris{[(2′‐benzylaminofomyl)‐phenoxylethyl)amine (L), was synthesized and characterized by X‐ray crystallographic analysis. Crystal data: C₄₈H_55.50LaN₇O_18.75, M_r=1169.40, monoclinic. space group, P2₁/n, a= 1.0644(3) nm. b=2.3889(5) nm, c= 2.1917(5) nm, β=90.65°, V=5.573(2) nm³, Z=1, D_c=1.394 g°cm^?3, R₁=0.0487, wR [1>2s?(I)]=0.1266. The results reveal that each La(III) ion binds to 9 oxygen atoms, three of which belong to carbonyl groups from three tripodal ligands and six to three bidentate nitrate groups and a two‐dimensional sheet of 4.8² networks is assembled by metal‐ligand coordination interaction. L, a heptadentate compound, merely acts as a tridentate bridging spacer due to its steric hindrance and links the La(III) ions as three‐connected nodes.     

1-烃基-1-硅杂环丁烷的合成及其Si—H键伸缩振动频率与结构关系的研究

硅杂环丁烷在有机硅化学中是一类非常重要的小分子环系化合物。由于硅杂环丁烷和环丁烷的环张力相似,因而显示出较高的反应活性。例如能与某些试剂作用,生成开环产物;在光解或热解条件下,产生具有Si=C结构的高活性中间体,可用以合成多种有机硅化合物。     

Cl/Ag体系研究 Ⅱ.Cl吸附引起的表面结构变化

运用LEED,UPS和HREELS等表面技术研究了氯吸附至(c)阶段的Ag(111)表面结构.结果表明,表面上有三维的AgCl(111)生成,其生长按修正的Stranski-Krastanov模式进行.伴随着AgCI(111)生长的同时,表面上产生缺陷.这种缺陷只有在氯吸附至(c)阶段时表面上形成三维AgCI的过程中才能产生,它一旦在表面上形成后,表面上氯的存在与否对其不产生影响.本文提出了一个(c)阶段时的Cl/Ag(111)体系的结构模型.