Analysis of the Coaxial Ridge-Loaded Helical Groove Waveguide

The coaxial ridge-loaded helical groove waveguide is proposed in this paper. As an all-metal slow-wave circuit, it has advantages of good heat dissipation and great size, and thus is suitable for use of millimeter TWT. By means of field theory, the expressions of the dispersion equation and the coupling impedance of the coaxial ridge-loaded helical groove waveguide are obtained. The influence of various circuit dimensions on the dispersion relation and the coupling impedance is investigated by the results of numerical computation.     

保偏光纤偏振器

利用保偏光纤的弯曲损耗特性绕制而成的光纤偏振器已有过报道。但文献[1]中报道的偏振器尺寸太大(φ=100mm),不利于光纤陀螺的小型化。本文介绍一种采用“熊猫”型光纤制成的偏振器,其尺寸较小(φ=30mm),消光比可达到33dB。     

J/ψ衰变到重子、反重子对中SU(3)对称性破坏的研究

利用粒子数据手册(PDG2004)公布的J/ψ衰变到重子、反重子对(BB)各个衰变道分支比的平均值, 对重子八重态的SU(3)对称性重新做了分析. 研究了J/ψ→BB中电磁相互作用和强相互作用的干涉. 得到了在J/ψ→BB中SU(3)单态、电磁 相互作用和SU(3)破坏各个因素所占的大小.     

Nanoparticle composites: FePt with wide-band-gap semiconductor

We present a simple way to synthesize FePt and ZnO (wide-band-gap semiconductor) nanoparticle composites. The FePt nanoparticles were fabricated using the method reported by Sun et al. By controlling the heating rate, 3 nm FePt nanoparticles were synthesized. Well-dispersed FePt and ZnO nanoparticle composites were prepared by further adding zinc acetate and oleyl amine into the 3 nm FePt nanoparticle dispersion. By controlling the molar ratio of the FePt and zinc acetate, FePt and ZnO nanoparticle composites with different FePt particle fractions were obtained. The intensity of photo luminescence spectra of the nanoparticle composites increases very much with decreasing FePt particle fraction, whereas the peak position shifts a little. After annealing at 550 °C for half an hour, the nanoparticle composites become magnetically hard or semi-hard with coercivity much dependent on the FePt particle volume fraction. The coercivity of the composites increases with annealing temperature. The composites hold the promise of applications in new generation recording and/or optical devices.     

波长检测技术在温度测量中的应用

提出一种波长检测技术实现温度测量的方法,利用FBG传感器对温度等物理量实施监测,具有测试精度高,应用场合不受限制等特点,当环境参数发生变化时,光纤光栅的有效折射率和光栅周期会受到影响,将引起光纤光栅峰值波长的偏移,依据反射光谱结构的变化,可知道其温度的变化趋势。实验测试结果表明,在温度变化0.1°,波长变化1pm,温度和波长具有良好的线性关系。     

水下光通信PPM数字接收机的DSP实现

水下光通信充分利用了海水对激光的衰减窗口效应,具有隐蔽、安全、非接触和快速机动等特性,兼具无线通信和光纤通信的优点,其关键技术在于光收发端机的研制;PPM(Pulse Position Modulation)数字脉冲位置调制具有低平均功率和高峰值功率等特性,特别适合用于无线数字光通信。两者性能的融合需要高灵敏度数字光接收机的实现。利用阵列光电检测接收、高速A/D转换和信号处理等相关技术,采用DSP处理器,高灵敏度的数字光PPM接收机得以实现,实验和测试表明它大大降低了接收机对于整个系统信噪比的要求,获得了较好的性能。     

一种新的磷化铟复合沟道高电子迁移率晶体管小信号物理模型

针对磷化铟(InP)复合沟道高电子迁移率晶体管(HEMT)的特点，对常规单沟道HEMT的小信号物理模型进行了修正，提出了一种新的用于复合沟道HEMT的小信号物理模型，用商用器件模拟软件ISE(integrated systems engineering)对其进行了仿真验证，对比了实测和仿真的I-V特性及转移特性曲线，重点研究了在InGaAs/InP双层沟道中考虑量子效应后的电场和电流密度随着不同栅电压的变化趋势，研究结果表明，由于在沟道中存在量子效应，在栅下靠源端低电场区域，电流主要分布在InGaAs沟道 关键词： 高电子迁移率晶体管 复合沟道 物理模型 磷化铟     

SiO2-羟基表面上金属原子的第一性原理研究

采用第一性原理方法研究了SiO2-羟基表面上几种金属原子的吸附性质,发现In和Ga在SiO2-羟基表面上的结合很弱,而Fe,Co,Ni在该表面上与Si,O形成强的化学键.等势能面和扩散势垒计算表明In(Ga)的扩散激活能只有0.1-0.3 eV,表明这两种原子容易在表面上扩散.这些结果可以定性地解释纳米合成中的一些实验现象.