Shortening of travelling-wave-amplified spontaneous emission by a transversal pumping scheme

An experimental investigation on shortening of travelling-wave ASE employing a transversal pumping is presented. A N₂ laser with =337.1 nm, pulsewidth: 700 ps is used as a pump source. An ASE pulse with duration of 45, 55 and 45 ps from dye solution of Rh 6G, Rh B and C311, respectively, is obtained. Pulse shapes of output signals generated from these solutions in three different pumping schemes are compared.     

Carbon anode materials from polysiloxanes for lithium ion batteries

Three kinds of silicon-containing disordered carbons have been prepared by pyrolysis of polysiloxanes with different amounts of phenyl side groups. X-ray powder diffraction, X-ray photoelectron spectroscopy and electrochemical capacity measurements were performed to study their behaviors. Graphite crystallites, micropores, and silicon species affect their electrochemical performances. All of them present high reversible capacities, >372 mAh/g. Since the graphite crystallites are very small, they contribute very little to reversible capacity. The number of micropores produced by gas emission during the heat-treatment process decides whether they exhibit reversible capacity. Si mainly exists in the form C–Si–O and influences the irreversible capacity. There is no evident capacity fading in the first ten cycles, indicating promising properties for these disordered carbons.     

Quinazolines and 1,4-benzodiazepines. XLVI. Photochemistry of nitrones and oxaziridines

The cyclic nitrones 7-chloro-1,3-dihydro-5-phenyl-2H-1,4-benzodiazepin-2-one 4-oxide ( 5a ) and 1,3-dihydro-7-methylthio-5-phenyl-2H-1,4-benzodiazepin-2-one 4-oxide ( 5b ) are photoisomerized to readily isolable oxaziridines, 7-chloro-4,5-epoxy-5-phenyl-1,3,4–5-tetrahydro-2H-1,4-benzodiazepin-2-one ( 6a ) and 4,5-epoxy-5-phenyl-1,3,4,5-tetrahydro-7-methylthio-2H-1,4-benzo-diazepin-2-one ( 6b ). Oxaziridine 6b upon further irradiation gave ring expansion and ring contraction products, 4,6-dihydro-2-phenyl-9-methylthio-5H-1,3,6-benzoxadiazocin-5-one ( 7b ) and 4-benzoyl-3,4-dihydro-6-methylthioquinoxalin-2(1H)-one ( 8b ) respectively. The ring contraction product, 4-benzoyl-6-chloro-3,4-dihydroquinoxalin-2(1H)-one ( 8a ), was obtained from irradiation of oxaziridine 6a .     

Sorption of 241Am by Aspergillus nigerspore and hyphae

Biosorption of ²⁴¹Am by a fungus A. niger, including the spore and hyphae, was investigated. The preliminary results showed that the adsorption of ²⁴¹Am by the microorganism was efficient. More than 96% of the total ²⁴¹Am could be removed from ²⁴¹Am solutions of 5.6-111 MBq/l (C _o) by spore and hyphaeof A. niger, with adsorbed ²⁴¹Am metal (Q) of 7.2-142.4 MBq/g biomass, and 5.2-106.5 MBq/g, respectively. The biosorption equilibrium was achieved within 1 hour and the optimum pH range was pH 1-3. No obvious effects on ²⁴¹Am adsorption by the fungus were observed at 10-45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above the ²⁴¹Am concentration. The ²⁴¹Am biosorption by the fungus obeys the Freundlich adsorption equation. There was no significant difference between the adsorption behavior of A. nigerspore and hyphae. This revised version was published online in July 2006 with corrections to the Cover Date.     

Biosorption of americium-241 by Saccharomyces cerevisiae

The biosorption of radionuclide ²⁴¹Am from solution by Saccharomyces cerevisiae (S. cerevisiae), and the effects of experimental conditions on the adsorption were investigated. The preliminary results showed thatS. cerevisiae is a very efficient biosorbent. An average of more than 99% of the total ²⁴¹Am could be removed by S. cerevisiae of 2.1 g/l (dry weight) from ²⁴¹Am solutions of 17.54–4386.0 mg/l (2.22 MBq/l–555 MBq/l) with adsorption capacities of 7.45–1880.0 mg/g biomass (dry weight) (0.94 MBq/g–237.9 MBq/g). The adsorption equilibrium was achieved within 1 hour and the optimum pH ranged 1–3. No significant differences on ²⁴¹Am adsorption were observed at 10–45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above ²⁴¹Am concentration. The relationship between concentrations and adsorption capacities of ²⁴¹Am indicated the biosorption process should be described by the Freundlich adsorption isotherm.     

Synthesis of lipid A derivatives and their interactions with polymyxin B and polymyxin B nonapeptide

Lipid A is the causative agent of Gram-negative sepsis, a leading cause of mortality among hospitalized patients. Compounds that bind lipid A can limit its detrimental effects. Polymyxin B, a cationic peptide antibiotic, is one of the simplest molecules capable of selectively binding lipid A and may serve as a model for further development of lipid A binding agents. However, association of polymyxin B with lipid A is not fully understood, primarily due to the low solubility of lipid A in water and inhomogeneity of lipid A preparations. To better understand lipid A-polymyxin B interaction, pure lipid A derivatives were prepared with incrementally varied lipid chain lengths. These compounds proved to be more soluble in water than lipid A, with higher aggregation concentrations. Isothermal titration calorimetric studies of these lipid A derivatives with polymyxin B and polymyxin B nonapeptide indicate that binding stoichiometries (peptide to lipid A derivative) are less than 1 and that affinities of these binding partners correlate with the aggregation states of the lipid A derivatives. These studies also suggest that cooperative ionic interactions dominate association of polymyxin B and polymyxin B nonapeptide with lipid A.     

Racemization of chiral amino alcohols III: Effect of Mg or Ca addition on the activity and stability of the Co/γ-Al2O3 catalyst

The racemization of R-(-)-2-amino-1-butanol in a reaction using Co/γ-Al₂O₃ catalysts and catalysts modified by Mg or Ca was investigated in this paper. Complete racemization was achieved with a yield of over 83% at using the Mg modified Co/γ-Al₂O₃ catalyst under optimized reaction conditions of 170°C and 2.5 MPa of H₂. The catalysts were thoroughly characterized by XRD, XPS, TPR, SEM and TEM. The addition of Mg and Ca may be advantageous for dispersing and stabilizing the active species of the Co/γ-Al₂O₃ catalyst, protecting from sintering, significantly improving its catalytic activity and stability.     

能动抛光磨盘的变形实验研究

 能动抛光磨盘实时产生不同的表面变形，在对大口径非球面光学元件进行精磨和抛光时实现与工件表面良好的大尺寸吻合，可以消除传统光学加工采用小尺寸磨头时带来的高频残余误差并提高加工效率。以加工直径1.3m左右，F/2的抛物面光学元件为例，对能动磨盘在不同离轴度时能够产生的变形进行了计算和实验。结果表明，能动磨盘能够以较高精度产生旋转对称或非对称的抛物面形状。对能动磨盘产生变形后的残余误差进行了分析。     

The Effects of Charged Amino Acid Side-Chain Length on Diagonal Cross-Strand Interactions between Carboxylate- and Ammonium-Containing Residues in a β-Hairpin

The β-sheet is one of the common protein secondary structures, and the aberrant aggregation of β-sheets is implicated in various neurodegenerative diseases. Cross-strand interactions are an important determinant of β-sheet stability. Accordingly, both diagonal and lateral cross-strand interactions have been studied. Surprisingly, diagonal cross-strand ion-pairing interactions have yet to be investigated. Herein, we present a systematic study on the effects of charged amino acid side-chain length on a diagonal ion-pairing interaction between carboxylate- and ammonium-containing residues in a β-hairpin. To this end, 2D-NMR was used to investigate the conformation of the peptides. The fraction folded population and the folding free energy were derived from the chemical shift data. The fraction folded population for these peptides with potential diagonal ion pairs was mostly lower compared to the corresponding peptide with a potential lateral ion pair. The diagonal ion-pairing interaction energy was derived using double mutant cycle analysis. The Asp2-Dab9 (Asp: one methylene; Dab: two methylenes) interaction was the most stabilizing (−0.79 ± 0.14 kcal/mol), most likely representing an optimal balance between the entropic penalty to enable the ion-pairing interaction and the number of side-chain conformations that can accommodate the interaction. These results should be useful for designing β-sheet containing molecular entities for various applications.