Ring-doped cladding-pumped single-mode three-level fiber laser

We propose and theoretically analyze three-level cladding-pumped fiber lasers in which the laser-active dopant is placed in a ring around a single-mode core. A ring-doped laser can work efficiently at wavelengths with strong small-signal absorption. This is otherwise difficult in a cladding-pumped fiber. Moreover, ring doping makes the laser less sensitive to quenching of the laser-active dopant and to excited-state absorption of the lasing field. In simulations of a Yb(3+) -doped fiber laser, ring doping increased the slope efficiency to 62%, up from 13% for a conventional core-doped fiber.     

Molecular dynamics simulations of biotin carboxylase

Biotin carboxylase catalyzes the ATP-dependent carboxylation of biotin and is one component of the multienzyme complex acetyl-CoA carboxylase that catalyzes the first committed step in fatty acid synthesis in all organisms. Biotin carboxylase from Escherichia coli, whose crystal structures with and without ATP bound have been determined, has served as a model system for this component of the acetyl-CoA carboxylase complex. The two crystal structures revealed a large conformational change of one domain relative to the other domains when ATP is bound. Unfortunately, the crystal structure with ATP bound was obtained with an inactive site-directed mutant of the enzyme. As a consequence the structure with ATP bound lacked key structural information such as for the Mg2+ ions and contained altered conformations of key active-site residues. Therefore, nanosecond molecular dynamics studies of the wild-type biotin carboxylase were undertaken to supplant and amend the results of the crystal structures. Specifically, the protein-metal interactions of the two catalytically critical Mg2+ ions bound in the active site are presented along with a reevaluation of the conformations of active-site residues bound to ATP. In addition, the regions of the polypeptide chain that serve as hinges for the large conformational change were identified. The results of the hinge analysis complemented a covariance analysis that identified the individual structural elements of biotin carboxylase that change their conformation in response to ATP binding.     

Granitic groundwater colloids sampling and characterisation: the strategy for artefact elimination

Colloids were separated by submicro-filtration of granitic groundwater samples collected at-line under in-situ thermodynamic conditions after down-hole groundwater sampling and transfer at the well head. The methodology avoids the generation of artefacts produced by pH changes due to CO(2) exchange, yielding potential carbonate precipitation, or by O(2) contamination yielding oxidized insoluble phases. The enhanced pressure and the anoxic conditions are also maintained through the filtering procedure. This procedure was carried out after a period of regular sampling of groundwater pumped to the ground surface and continuous on-line long-term measurements (weeks, months) of chemical and physical parameters in the unbroken sample water both at the ground surface and at depth down-hole. Colloid samples were characterized on the submicro-filtration membrane by scanning electron microscopy. Under deep granite groundwater conditions, natural colloids occur sparsely. The colloid concentration was determined C(col) approximately 1 and approximately 50 microg L(-1) for sizes ranging from 50 to 200 nm or n(col) approximately 3.9 x 10(9) and 47 x 10(9) L(-1) for sizes larger than 50 nm for KFM11A, Forsmark, and KLX17A, Laxemar, Oskarshamn, respectively, Sweden. These colloids are expected to be clay particles with an average size smaller than 200 nm for the Na-Ca-Cl and Na-Cl groundwaters (pH 7.6 and 8.00, ionic strength approximately 10(-1) and approximately 10(-2) mol L(-1), respectively, for KFM11A and KLX17A), the colloid concentrations were comparable with values previously reported in the literature.     

Integral representation of holomorphic mappings on fully nuclear spaces

We obtain the following integral representation:

     

Nonaqueous capillary electrophoresis for analysis of the ethanol consumption biomarker phosphatidylethanol

Nonaqueous CE (NACE) methodology was developed for the separation and determination of phosphatidylethanol (Peth), a new biomarker of ethanol intake. Peth is an abnormal phospholipid formed in cell membranes only in the presence of ethanol, via the transphosphatidylation reaction of phospholipase D. The NACE separation medium consisted of 80 mM ammonium acetate in 50% ACN, 33% 2-propanol, 12% hexane and 5% methanol. A stacking effect was obtained by reducing the concentration of ammonium acetate in the separation medium for all injected samples. The LOD was estimated to 1 microM (5.6 fmol) of Peth with conventional UV detection, equalling 0.4 micromol/L blood. Peth was successfully determined in extracts of human blood samples. Separation of Peth from other blood lipids in the lipid extract sample was performed in 5 min. The method facilitates smaller sample volumes and performs about ten times faster compared to earlier chromatographical methods.     

Thermodynamical studies of designed ligands binding to Cel7A using partial-filling capillary electrophoresis

A convenient experimental method for thermodynamical studies based on partial-filling affinity CE is presented. The advantages of this approach are the possibility to determine binding energies from relatively weak interactions as well as the small amounts of samples consumed. In order to explore the affinity and selectivity of the cellobiohydrolase Cel7A, a number of propranolol analogues were recently designed. The affinities of a selection of these ligands were determined in the temperature interval 15-40 degrees C, and DeltaG degrees , DeltaH degrees and DeltaS degrees were obtained by means of Van't Hoff plots. Through these experiments, the importance of the entropy contribution in the complexation between the ligands and Cel7A has been demonstrated.     

Regular and irregular deswelling of polyacrylate and hyaluronate gels induced by oppositely charged surfactants

New multiresponsive core-shell microgels have been synthesized, with a thermoresponsive core and a glucose-responsive shell, made respectively of poly(N-isopropylacrylamide) (pNIPAM) and pNIPAM-co-acrylamidophenylboronic acid (pNIPAM-co-APBA). The structure of the particles was elucidated by means of dynamic light scattering. Their thermal properties were investigated and compared to those of the core alone. Without glucose, the hydrophobic shell prevented the core from swelling in a certain temperature range where the shell was shown to be collapsed. This core compression vanished upon glucose addition, when the shell became hydrophilic and swelled. Therefore, the extent of core swelling was regulated by two processes: its own internal stimulus, i.e. temperature, and shell compression, which is proportional to glucose concentration, even at physiological salinity. The concept was applied to a selected chemical composition. Core-shell microgels with a response to glucose at physiological pH were obtained and used to encapsulate insulin. Insulin release was shown to be regulated by the presence of glucose.     

Mechanisms of air oxidation of ethoxylated surfactants--computational estimations of energies and reaction behaviors

Pathways for formation of previously observed autoxidation products of ethoxylated surfactants have been studied by DFT (B3LYP). In addition to the established radical-chain reaction, several mechanistic possibilities for intramolecular fragmentation of the intermediate radicals have been characterized concerning reaction barriers and energies of transition states. The results can rationalize the formation of previously observed autoxidation products, including several, which have been implicated as strongly allergenic.     

Evaluation of ionization techniques for mass spectrometric detection of contact allergenic hydroperoxides formed by autoxidation of fragrance terpenes

Hydroperoxides formed by autoxidation of common fragrance terpenes are strong allergens and known to cause allergic contact dermatitis (ACD), a common skin disease caused by low molecular weight chemicals. Until now, no suitable methods for chemical analyses of monoterpene hydroperoxides have been available. Their thermolability prohibits the use of gas chromatography and their low UV-absorption properties do not promote sensitive analytical methods by liquid chromatography based on UV detection. In our study, we have investigated different liquid chromatography/mass spectrometry (LC/MS) ionization techniques, electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI), and atmospheric pressure photoionization (APPI), for detection of hydroperoxides from linalool and limonene.Flow injection analysis was used to evaluate the three different techniques to ionize the monoterpene hydroperoxides, linalool hydroperoxide and limonene hydroperoxide, by estimating the signal efficacy under experimental conditions for positive and negative ionization modes. The intensities for the species [M+H]+ and [M+H-H2O]+ in positive ionization mode and [M-H]- and [M-H-H2O]- in negative ionization mode were monitored. It was demonstrated that the mobile phase composition and instrumental parameters have major influences on the ionization efficiency of these compounds. ESI and APCI were both found to be appropriate as ionization techniques for detection of the two hydroperoxides. However, APPI was less suitable as ionization technique for the investigated hydroperoxides.