Palladium-catalyzed hydrosilylation of ynones to access silicon-stereogenic silylenones by stereospecific aromatic interaction-assisted Si–H activation

Hydrosilylation is one of the most important reactions in synthetic chemistry and ranks as a fundamental method to access organosilicon compounds in industrial and academic processes. However, the enantioselective construction of chiral-at-silicon compounds via catalytic asymmetric hydrosilylation remained limited and difficult. Here we report a highly enantioselective hydrosilylation of ynones, a type of carbonyl-activated alkynes, using a palladium catalyst with a chiral binaphthyl phosphoramidite ligand. The stereospecific hydrosilylation of ynones affords a series of silicon-stereogenic silylenones with up to 94% yield, 20:1 regioselectivity and 98:2 enantioselectivity. The density functional theory(DFT) calculations were conducted to elucidate the reaction mechanism and origin of high degree of stereoselectivity, in which the powerful potential of aromatic interaction in this reaction is highlighted by the multiple C–H-π interaction and aromatic cavity-oriented enantioselectivitydetermining step during desymmetric functionalization of Si–H bond.     

Joint Detection of Community and Structural Hole Spanner of Networks in Hyperbolic Space

Community detection and structural hole spanner (the node bridging different communities) identification, revealing the mesoscopic and microscopic structural properties of complex networks, have drawn much attention in recent years. As the determinant of mesoscopic structure, communities and structural hole spanners discover the clustering and hierarchy of networks, which has a key impact on transmission phenomena such as epidemic transmission, information diffusion, etc. However, most existing studies address the two tasks independently, which ignores the structural correlation between mesoscale and microscale and suffers from high computational costs. In this article, we propose an algorithm for simultaneously detecting communities and structural hole spanners via hyperbolic embedding (SDHE). Specifically, we first embed networks into a hyperbolic plane, in which, the angular distribution of the nodes reveals community structures of the embedded network. Then, we analyze the critical gap to detect communities and the angular region where structural hole spanners may exist. Finally, we identify structural hole spanners via two-step connectivity. Experimental results on synthetic networks and real networks demonstrate the effectiveness of our proposed algorithm compared with several state-of-the-art methods.     

Amplification of spontaneous emission in Nd~(3 )-doped fiber pumped by Ti: Al_2O_3 tunable laser

Amplification of spontaneous emission(ASE) in 4m Nd~(3 )-doped fiber pumped by Ti : Al~2O_3 tunable laser is studied theoretically and experimentally. The output of 2.64mW from ASE source pumped at 833 nm is obtained and the experimental results of ASE source are compared with that of Nd~(3 )-doped fiber ring laser.     

线性滑轨支撑微型斯特林制冷机的开发及性能调试

介绍了独立开发的采用线性滑轨支撑的微型整体式斯特林制冷机,对结构设计的要点进行了详尽的分析,指出采用线性滑轨支撑将大大改善旋转电机驱动斯特林制冷机的可靠性.文中还介绍了对影响制冷机性能特性的因素进行综合试验的情况.     

Quantum State Sharing of an Arbitrary Three-Atom State by Using Five-Atom Cluster State in Cavity QED

We present a scheme for implementing the deterministic quantum state sharing of an arbitrary three-atom state by using a five-atom cluster state and a Bell-state in cavity QED. In the scheme, it does not involve Bell-state measurement and only needs to perform the single-atom measurements. Our scheme is not sensitive to both the cavity decay and the atom radiation, which is of importance in view of decoherence.     

基于动态溶胀法制备中空聚合物微球

以表面带正电荷的m级聚苯乙烯微球为种子,经过甲苯、二乙烯基苯溶胀,聚合与包覆等过程制备了直径约5 m的中空聚合物微球。研究了溶剂类型、溶剂用量对动态溶胀法制备的中空聚合物微球粒径、分布和结构的影响,讨论了中空聚合物微球的形成机理。结果表明:添加一定量甲苯、二甲苯等挥发性溶剂是动态溶胀法形成中空聚合物微球的前提;甲苯用量越多,溶胀后形成的中空结构越明显,孔径越大;选择低溶解性的二甲苯溶剂更有利于中空结构的形成。     

大气模式与气溶胶模型对辐射传输计算的影响

大气模式与气溶胶模型选择是影响定量遥感应用的辐射传输计算的重要因素。人们一般凭感性认识去进行选择,有一定随意性,对其带来的影响程度关注甚少。以太阳辐射计测量为依据,对大气模式与气溶胶模型选择方法作了研究,并利用经辐射定标过的光谱辐射计地面测量对辐射传输计算精度进行了验证。在昆明进行的试验表明,在0.50~0.68μm范围内,选择中纬度冬季大气模式和大陆型气溶胶,经辐射传输计算后得到的光谱辐射亮度与光谱辐射计测量结果一致性很好,差别在3.3%以内;变换大气模式对辐射传输计算产生明显影响,差别达10%左右;选择不同的气溶胶模型对辐射传输计算影响也很大,差别达11%左右。基于辐射计测量的大气模式与气溶胶模型选择避免了主观选择的不可靠性,有益于减少辐射传输计算或卫星遥感大气订正的误差。     

激光喷丸改善TC6钛合金组织和力学性能

为了使激光冲击强化技术能较好地应用于TC6钛合金的发动机叶片,对TC6钛合金进行试验研究。通过X射线衍射仪、透射电子显微镜等测试技术分析了不同参数下TC6钛合金的微观组织变化,用显微硬度计和残余应力测试仪分别表征表层硬度和残余应力变化,并测试材料冲击后的振动高周疲劳性能。试验结果表明:激光冲击材料后表面组织得到明显细化,随着冲击次数的增加,先后出现了高密度位错、位错胞、亚晶和纳米晶。性能方面,表面硬度在冲击一次即可提高19%,硬度影响深度达到700 m;与此同时表面残余应力最高达到-608.5 MPa,在500 m深度上仍具有-100 MPa左右的应力存在。经三次冲击后,标准疲劳试片的疲劳极限提高近20%。     

双耦合B类激光器的混沌动力学行为

提出并研究了双耦合Ｂ类激光器的动力学行为。发现该系统可在稳定连续、自脉冲和混沌输出。还发现该系统是以倍周期分岔由周期解进入混沌。     

形态变换在模式识别中的应用

首先讨论数学形态学中的击中与否变换应用于模式识别，然后对击中与否变换进行改进，并应用于多目标识别（探测）系统，增加了识别（探测）的容错性。结果表明，只要结构元素选取得当，这种方法是可行的。