Discrimination of Ganoderma lucidum according to geographical origin with near infrared diffuse reflectance spectroscopy and pattern recognition techniques

A rapid and nondestructive near infrared (NIR) method combined with chemometrics was used to discriminate Ganoderma lucidum according to cultivation area. Raw, first, and second derivative NIR spectra were compared to develop a robust classification rule. The chemical properties of G. lucidum samples were also investigated to find out the difference between samples from six varied origins. It could be found that the amount of polysaccharides and triterpenoid saponins in G. lucidum samples was considerably different based on cultivation area. These differences make NIR spectroscopic method viable. Principal component analysis (PCA), discriminant partial least-squares (DPLS) and discriminant analysis (DA) were applied to classify the geographical origins of those samples. The results showed that excellent classification could be obtained after optimizing spectral pre-treatment. For the discriminating of samples from three different provinces, DPLS provided 100% correct classifications. Moreover, for samples from six different locations, the correct classifications of the calibration as well as the validation data set were 96.6% using the DA method after the SNV first derivative spectral pre-treatment. Overall, NIR diffuse reflectance spectroscopy using pattern recognition was shown to have significant potential as a rapid and accurate method for the identification of herbal medicines.     

砷的代谢机制、毒性和生物监测

砷化合物是备受关注的一类污染物,特别是饮用水中的砷污染引发了全球性的健康问题.本文综述了近年来人们对砷的代谢机制、毒性和生物监测的研究进展.砷在生物体内的代谢过程十分复杂,在氧化还原酶和甲基转移酶的参与下,产生一系列的代谢产物和中间产物.其中,砷的原始摄入形态、代谢产物及中间产物由于不同的物理化学性质,体现了不同的毒性.人类和不同的动物由于不同的砷代谢机理和甲基化能力,也表现了对砷毒性抵抗能力的差异.在生物体内,一些砷化合物与生物蛋白相互作用,影响它们的存在形式、分布和传输,是砷的生物代谢和毒理研究中不可或缺的内容.生物监测是一种直接有效的污染物健康风险评估方法.在尿液、血液、唾液、头发和指甲中砷化合物直接反映了暴露主体的砷暴露程度,这5种生物介质作为砷暴露的生物标志物各有优缺点.在砷的研究中,代谢机制和毒性的研究可以帮助选择合适的生物监测方法,做出合理准确的健康风险评估.生物监测也可促进对砷的代谢机制和毒性的理解,推断可能的代谢途径,定量毒性剂量效应,两者相互依赖相互促进.     

微波辅助快速制备核-壳型尿苷印迹聚合物及其在线富集应用研究

采用微波辅助加热,以尿苷为模板分子,丙烯酰胺(AA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,快速制备尿苷印迹聚合物,聚合时间大大缩短,仅为传统加热的1/8.采用红外光谱和扫描电镜对印迹聚合物进行表征,结果表明二氧化硅表面成功包覆尿苷印迹壳层;该印迹聚合物颗粒分散均匀,印迹壳层厚度约为100 nm.将该印...     

HO3+ 杂Ge-In-Sb-S玻璃陶瓷光谱特性

采用熔融淬冷法和热处理工艺制备了系列掺Ho3+的透明G eS2-In2S3-Sb2S3硫系玻璃陶瓷.测试了Ho3掺杂的基质玻璃和玻璃陶瓷样品的密度、显微硬度、红外光谱以及在900 nm激光泵浦下的近红外及中红外荧光光谱.结果表明:热处理后样品析出的晶相为In2S3和Sb2S3颗粒的混合体,晶粒尺寸限制在～100 nm以...     

Surface modification of PDMS by surface-initiated atom transfer radical polymerization of water-soluble dendronized PEG methacrylate

The current paper reports the synthesis of a highly hydrophilic, antifouling dendronized poly(3,4,5-tris(2-(2-(2-hydroxylethoxy)ethoxy)ethoxy)benzyl methacrylate) (PolyPEG) brush using surface initiated atom transfer radical polymerization (SI-ATRP) on PDMS substrates. The PDMS substrates were first oxidized in H₂SO₄/H₂O₂ solution to transform the Si-CH₃ groups on their surfaces into Si-OH groups. Subsequently, a surface initiator for ATRP was immobilized onto the PDMS surface, and PolyPEG was finally grafted onto the PDMS surface via copper-mediated ATRP. Various characterization techniques, including contact angle measurements, attenuated total reflection infrared spectroscopy, and X-ray photoelectron spectroscopy, were used to ascertain the successful grafting of the PolyPEG brush onto the PDMS surface. Furthermore, the wettability and stability of the PDMS-PolyPEG surface were examined by contact angle measurements. Anti-adhesion properties were investigated via protein adsorption, as well as bacterial and cell adhesion studies. The results suggest that the PDMS-PolyPEG surface exhibited durable wettability and stability, as well as significantly anti-adhesion properties, compared with native PDMS surfaces. Additionally, our results present possible uses for the PDMS-PolyPEG surface as adhesion barriers and anti-fouling or functional surfaces in biomedical applications.     

One-pot synthesis of N-methylimidazolium-based porous polymer monolith for capillary electrochromatography via free radical copolymerization and quaterisation

One-pot synthesis of porous polymer monolith decorated with N-methylimidazolium in a capillary was described. The polymer matrix was synthesized by in situ copolymerization and quaterization of 3-chloro-2-hydroxylpropyl methacrylate (CHPMA), ethylene dimethacrylate (EDMA), and N-methylimidazole (N-MIz). The influencing factors including amount of cross-linkers, composition of porogenic solvents, and polymerization temperature on the formation of the monolithic column were investigated. The monolithic column exhibited high column efficiency for thiourea, up to 135 000 plates per meter, and phenylmethanol, up to 102 000 plates per meter. Different types of compounds including alkylbenzenes, phenols, and inorganic anions were successfully baseline separated by capillary electrochromatography (CEC). The separation of theses analytes on the column indicated typical reversed-phase and anion-exchange chromatographic retention mechanism.     

一种卡宾配合物的合成及其在Suzuki反应中的应用

合成了一种N-杂环卡宾的钯配合物,可用于高效地催化芳基溴化物和对甲苯磺酸芳酯对芳基硼酸的Suzuki偶联反应.该反应在二氧六环溶剂中以醋酸钾为助剂、空气氛下80℃即可进行,具有收率高、催化剂容易制备等优点.     

Electronic Coupling between Two Amine Redox Sites through the 5,5′‐Positions of Metal‐Chelating 2,2′‐Bipyridines

Electron delocalization of new mixed‐valent (MV) systems with the aid of lateral metal chelation is reported. 2,2′‐Bipyridine (bpy) derivatives with one or two appended di‐p‐anisylamino groups on the 5,5′‐positions and a coordinated [Ru(bpy)₂] (bpy=2,2′‐bipyridine), [Re(CO)₃Cl], or [Ir(ppy)₂] (ppy=2‐phenylpyridine) component were prepared. The single‐crystal molecular structure of the bis‐amine ligand without metal chelation is presented. The electronic properties of these complexes were studied and compared by electrochemical and spectroscopic techniques and DFT/TDDFT calculations. Compounds with two di‐p‐anisylamino groups were oxidized by a chemical or electrochemical method and monitored by near‐infrared (NIR) absorption spectral changes. Marcus–Hush analysis of the resulting intervalence charge‐transfer transitions indicated that electron coupling of these mixed‐valent systems is enhanced by metal chelation and that the iridium complex has the largest coupling. TDDFT calculations were employed to interpret the NIR transitions of these MV systems.     

Kinetic determination of ascorbic acid by the BZ oscillating chemical system

A new analytical method for the determination of ascorbic acid by the perturbation caused by different amounts of ascorbic acid on the BZ oscillating chemical system involving the Ce(IV)-catalyzed reaction between potassium bromate and malonic acid in a acidic medium is proposed. The method relies on the linear relationship between the change in the oscillation amplitude of the chemical system and the concentration of ascorbic acid, which is in this work exposed for the first time. The calibration curve is linearly proportional to the concentration of ascorbic acid over the range 3.5x10(-6)-4.7x10(-4) M, with the regression coefficient is 0.9975. Two different methodologies were used to address the determination. Some aspects of the potential mechanism of action of ascorbic acid on the BZ oscillating chemical system are discussed in detail.     

Mechanisms and kinetics of humic acid adsorption onto chitosan-coated granules

Chitosan, a naturally abundant biopolymer, has widely been studied for metal adsorption from various aqueous solutions, but the extension of chitosan as an adsorbent to remove humic substances from water has seldom been explored. In this study, chitosan was coated on the surface of polyethyleneterephthalate (PET) granules through a dip and phase inversion process and was examined for humic acid removal in a series of batch adsorption experiments. Scanning electron microscopic (SEM) images showed that the PET granules were uniformly covered with a layer of chitosan and the chitosan layer possessed numerous open pores on the surface. Zeta potential study indicated that the chitosan-coated granules had positive zeta potentials at pH < 6.6 and negative zeta potentials at pH > 6.6. Adsorption of humic acid onto the chitosan-coated granules was found to be strongly pH-dependent. Significant amounts of humic acid were adsorbed under acidic and neutral pH conditions, but the adsorption capacity was reduced remarkably with increasing solution pH values. The adsorption isothermal data under various initial humic acid concentrations (at the same solution pH value) can be adequately modeled by the Langmuir and Freundlich models. X-ray photoelectron spectroscopy (XPS) revealed that the amino groups of the chitosan layer were protonated due to humic acid adsorption, suggesting the formation of organic complex between the protonated amino groups and humic acid. Kinetic study indicated that the adsorption process was transport-limited at low solution pH values, but became both transport- and attachment-limited at high solution pH values.