Positron Annihilation Study on the Thermal Fatigue in a Die Steel

Samples of 5Cr2NiMoVSi die steel which underwent thermal fatigue with different fatigue cycles have been studied by using microhardness and positron lifetime measurements. It is found that the microhardness and the positron lifetime parameters increase and decrease alternatively with increasing the number of the fatigue cycles. The experimental results reveal that the fatigue strain, the dynamical recovery, and recrystallization and the precipitation are main causes of variation of the defects in the process of thermal fatigue.     

Quasielastic light scattering,mutual diffusion and viscoelasticity of polymer solutions

Quasielastic light (QEL) scattering studies of semidilute solutions of polystyrene in benzene and benzene plus diethyl phthalate mixed solvents have been carried out. Comparisons are made between experiment and theoretical results. It is found that the relative amplitude of the viscoelastic modes depends on the coupling parameter β (defined in the text). For the solutions with β=0, no viscoelastic component is observed in the QEL scattering spectrum, consistent with the theoretical prediction. The amplitude and a relaxation time distribution of the viscoelastic component of the QEL scattering spectrum of PS in the mixed solvent are found to depend on time. Steady state values are obtained only after the solution is equilibrated for more than a month. Time evolution of the QEL spectrum has been investigated.     

Dendritic analogues of engineering plastics - a general one-step synthesis of dendritic polyaryl ethers

The first general single-step route to dendritic or cascade polyaryl ethers analogous to common linear polyaryl ethers is described. The sodium salts of four AB₂ monomers each containing a single phenolic hydroxyl group and two aryl fluorides activated toward nucleophilic substitution by carbonyl, sulphonyl, or tetrafluorophenyl moieties are shown to polymerize in hot N, N-dimethylacetamide. The products are high molecular weight polymers (7000 < M_n < 36000), have narrow polydispersities (1.50 < M_w/M_n < 4.50), and are highly soluble in organic solvents. The molecular weights of two of the polymers increase with monomer concentration. The polymers are thermally stable (500 °C under N₂) and have glass transition temperatures ranging from 135 to 231 °C.     

薄膜法布里-珀罗滤光片中的超棱镜效应

基于薄膜法布里珀罗滤光片在其峰值波长处具有较大群延迟的特性,设计并从实验上验证了光束倾斜入射时这种结构中存在的超棱镜效应。根据光学薄膜理论中的特征矩阵法,数值模拟计算了器件的群延迟和空间色散曲线,镀制并对器件进行了测试。测试结果表明器件在透射峰值波长处因超棱镜效应引起的空间色散最大位移值达到65μm,与理论计算结果非常吻合;相对于传统的光栅和棱镜器件而言器件具有更高的空间角度色散,实际测试在784.5 nm至786.5 nm波长范围内器件的角色散达到30°/nm。     

带常利率的Erlang(2)风险模型的罚金折现期望函数

The purpose of this paper is to consider the expected value of a discounted penalty due at ruin in the Erlang（2） risk process under constant interest force. An integro-differential equation satisfied by the expected value and a second-order differential equation for the Laplace transform of the expected value are derived. In addition, the paper will present the recursive algorithm for the joint distribution of the surplus immediately before ruin and the deficit at ruin. Finally, by the differential equation, the defective renewal equation and the explicit expression for the expected value are given in the interest-free case.     

Rubber toughening of plastics: Rubber particle cavitation and its consequences

A newly-developed energy-based model for cavitation in rubber particles provides a quantitative basis for understanding the factors controlling toughness in rubber-modified plastics. Cavitation of the rubber is the initial step in the toughening mechanism, and is shown to accelerate yielding of the matrix, either by the formation of dilatation bands or by multiple crazing. Cavitation is thus a strain-softening effect. However, in some cases the cavitated rubber forms fibrils which become highly stretched as local strains increase, and thus begin to carry a significant fraction of the applied stress. The resulting strain-hardening ensures that yielding is not limited to a small deformation zone at a crack tip, but spreads outwards.     

电子束蒸发在不同Ar气氛下外退火制备MgB2超导薄膜

制备高质量的MgB2薄膜是实现MgB2超导电子器件应用的前提和基础.我们用电子束蒸发B膜和Mg/B多层膜为前驱然后后退火的方法,分别在高温区(~900℃)和中温区(~750℃)成功获得了MgB2超导薄膜.改变退火的Ar气压条件,采用B膜前驱退火的样品Tc可达到38K以上,转变宽度0.3K.Mg/B多层膜的结果尽管Tc稍低(Tc~35K),但薄膜表面更加均匀,且避免了高温下Mg蒸汽污染的问题.对于两种前驱退火中观察到的完全不同的退火气压影响,我们认为是与其各自的超导成相过程相联系的,在此基础上我们对退火气压效应给出了自己的分析和解释,为今后进一步细致研究退火过程中的薄膜生长机制提供了参考.     

富锌条件下生长氮掺杂氧化锌薄膜的光学和电学性质

报道了采用等离子体辅助分子束外延方法(P-MBE),利用NO作为N源和O源,在c-面蓝宝石(c-Al₂O₃)衬底上外延生长了N掺杂ZnO薄膜。X射线衍射谱(XRD)和吸收谱中都出现了不同于未掺杂样品的特性,X射线光电子谱(XPS)中也发现了N的受主信号。但是在霍尔效应(Hall-effect)测量中,发现该样品并没有出现预期的p型导电特性,而是出现载流子浓度很高(2.15×10²⁰cm^-3)的n型导电特性。结合XPS结果和理论分析,认为在富Zn条件下生长会导致过量的填隙Zn原子,补偿了全部的受主后,又促使其出现了从半导体-金属的Mott转变。