一个闭环二噻吩乙烯及其Ag(Ⅰ)配合物的合成、结构和光致变色性质

首次合成了一个含氰基二噻吩乙烯闭环体化合物(L_c),用IR、¹H NMR及X射线单晶衍射研究其结构,表明它是一对R,R和S,S对映异构体组成的消旋混合物,证实了光化学顺旋环化反应中己三烯结构转变为环己二烯结构。紫外可见光谱研究表明其在THF溶液和固相均具有可逆的光致变色性质,可见区最大吸收波长为607 nm。光异构化动力学研究表明开环反应为一级反应,而闭环反应为0级反应。将其进一步用作配体与Ag(CF₃SO₃)自组装合成了配合物1,并用元素分析、IR、¹H NMR及电喷雾质谱进行结构表征。1在固相具有可逆的光致变色性质,但与开环配体组装的配合物不同,由于刚性的闭环配体结构限制了2个噻吩环的自由旋转,银离子与闭环配体配位未能修饰配体的吸收波长,1的可见区最大吸收波长与配体相同。与闭环配体相比,1的光异构化反应速度更快,这和循环伏安法测得其具有比配体更小的带隙结果一致。     

HPLC-DAD data coupled with second-order calibration method applied to food analysis: Simultaneous determination of six benzoylurea insecticides in various fruit samples by selecting time region of chromatogram

This work presents a novel application of second-order calibration based on self-weighted alternating trilinear decomposition(SWATLD)algorithm for analyzing the HPLC-DAD data.The proposed method makes it possible to simultaneously determine teflubenzuron,hexaflumuron,flufenoxuron,chlorfluazuron,diflubenzuron and benzoylurea in different fruit samples,i.e.pear,apple and banana,in the selected time region of chromatogram.The concentration,elution time and spectral information of these benzoylurea insecticides are selectively extracted from complex matrices even in the presence of unknown interferences.The root-mean-square error of prediction(RMSEP)and figures of merit,including sensitivity(SEN),selectivity(SEL)and limit of detection(LOD)are employed to access the performance of the method.The LODs obtained for these insecticides are within the range 0.017–0.26 ppm in pears,0.039–0.33 ppm in apples,0.041–0.44 ppm in bananas,respectively.Such a chemometrics-based protocol holds great potential to be extended as a promising alternative for more practical applications in food safety and quality monitoring.     

Mild and Efficient Procedure for Michael Addition of N-Heterocycles to α,β-Unsaturated Compounds Using Anhydrous K3PO4 as Catalyst

Imidazole, 1,2,4-triazole, indole, and benzotriazole undergo conjugate additions with α, β-unsaturated carbonyl compounds in the presence of anhydrous potassium phosphate at ambient temperature to afford the corresponding Michael adducts in excellent yields.     

Removal of uranium(VI) from aqueous solutions by carboxyl-rich hydrothermal carbon spheres through low-temperature heat treatment in air

Carboxyl-rich hydrothermal carbon spheres were prepared by simply heating pristine hydrothermal carbon spheres (HCSs) at lower temperature in air, and the textural properties were characterized using Boehm titrations, scanning electron microscopy, Fourier transform infrared spectrometer (FT-IR) and elemental-analysis. The result of Boehm titrations indicated that the content of carboxyl groups on HCSs increased significantly from 0.53 to 3.81 mmol/g after heat-treatment at 300 °C, which was also confirmed by FT-IR and EA qualitatively. The ability of heat-treated HCSs has been explored for the removal and recovery of uranium from aqueous solutions, and the influences of different experimental parameters, such as heat-treatment temperature, contact time and ionic strength, on adsorption were investigated. The U(VI) sorption capacity of HCSs increased from 55.0 to 179.95 mg/g after heat-treatment at 300 °C for 5 h. Selective adsorption studies showed that the heat-treated HCSs could selectively remove U(VI), and the selectivity coefficients were improved after heat-treatment in the presence of co-existing ions, Na(I), Ni(II), Sr(II), Mn(II), Mg(II) and Zn(II). The adsorbent HCSs could be effectively regenerated by 0.05 mol/L HCl solution for the removal and recovery of U(VI). Complete removal (99.0 %) of U(VI) from 1.0 L industry wastewater containing 15.0 mg U(VI) ions was possible with 5.0 g heat-treated HCSs. In addition, a reaction mechanism for newly generating carboxyl groups on pristine HCSs surface during heat-treatment process and uranyl ion interaction with carboxyl-rich hydrothermal carbon spheres were also supposed.     

Biomass Composition, Lipid Characterization, and Metabolic Profile Analysis of the Fed-Batch Fermentation Process of Two Different Docosahexanoic Acid Producing Schizochytrium sp. Strains

Growth and fermentation characteristics, biomass composition, lipid characterization and metabolic profiling analysis of two different Schizochytrium sp. strains, the original strain and the industrial adaptive strain, were investigated in the fed-batch fermentation process. The final cell biomass, total lipids content, docosahexanoic acid (DHA) content and DHA productivity of the adaptive strain were much higher than those of the original strain. The metabolic distinctions which extensively existed between these two strains were revealed by the score plot of principal component analysis. In addition, potential biomarkers responsible for discriminating different strains were identified as myo-inositol, histidine, alanine, asparagine, cysteine, and oxalic acid. These findings provided new insights into the industrial strain screening and further improvement of DHA production by Schizochytrium sp.     

Enhanced orientation of PEO polymer chains induced by nanoclays in electrospun PEO/clay composite nanofibers

Polymer fibers composed of poly(ethylene oxide) (PEO) and nanoclay were fabricated by electrospinning. The morphology of the composite nanofibers was characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM), which showed aligned nanoclays in the fibers. Polarized Fourier transform infrared (FT-IR) spectroscopy revealed that the PEO chains in the composite fibers exhibit a higher degree of orientation than that in PEO nanofibers containing no nanoclay. It is believed that spatial confinement is present in the electrospun nanofibers, which results in the enforcement of the mutual restriction. The anisotropic hierarchical nanostructure may have potential applications in optics, mechanical materials, and biomedical materials for cell culture.     

FDU-15-Pt composites with different Pt loading and their electrocatalytic reduction to ultratrace nitroaromatic compounds

FDU-15 is a hexagonal mesoporous material with nanometer-sized, highly ordered arrays and large special surface area. In this work, FDU-15-Pt with 2.0%, 5.0% and 8.0% Pt loading were synthesised and used for electrochemical detection of trace nitroaromatic compounds (NACs). The FDU-15-Pt samples were characterised by CO Chemisorption, transmission electron microscopy (TEM) and X-ray diffraction (XRD). It has been demonstrated that FDU-15-Pt with 2.0% Pt loading has the smallest Pt particle size of 2.9?nm, highest Pt metal dispersion of 37.7% and largest Pt metal surface area of 21.36?m^2?g^?1. The FDU-15-Pt/PDDA modified electrode were assembled by electrostatic adsorption of Poly (diallyldimethylammonium chloride) (PDDA) and FDU-15-Pt. The 2.0% FDU-15-Pt modified sensor showed higher selectivity for NACs than those of 5.0% and 8.0% FDU-15-Pt, which were verified by electrochemical experiments. A linear response over TNT concentration ranging from 8.8?×?10^?9?M to 1.2?×?10^?5 M was exhibited with a low detection limit of 2.9?×?10^?9?M (S/N?=?3). Moreover, the proposed 2.0% FDU-15-Pt/PDDA modified sensor has been applied to the detection of NACs in spiked environmental water samples and shows promise for fast and accurate determination of trace NACs in real samples.     

Syntheses, crystal structures and properties of two nickel(II) coordination polymers constructed from 5-(isonicotinamido)isophthalic acid

Two Ni(II) metal–organic frameworks, [Ni(INAIP)(DMF)]·0.5DMF and [Ni(INAIP)(H₂O)]·2H₂O, have been synthesized by the reaction of 5-(isonicotinamido)isophthalic acid (H₂INAIP) with NiSO₄·6H₂O using different reaction solvents. Single-crystal X-ray diffraction analysis indicates that [Ni(INAIP)(DMF)]·0.5DMF has a twofold interpenetrated three-dimensional (3D) framework with sra topology, while [Ni(INAIP)(H₂O)]·2H₂O has a two-dimensional (2D) network structure with a 4-connected (4³·6³) topology. In addition, the magnetic and adsorption properties of the complexes were explored.     

Encapsulating Sulfur into Hierarchically Ordered Porous Carbon as a High‐Performance Cathode for Lithium–Sulfur Batteries

A three‐dimensional (3D) hierarchical carbon–sulfur nanocomposite that is useful as a high‐performance cathode for rechargeable lithium–sulfur batteries is reported. The 3D hierarchically ordered porous carbon (HOPC) with mesoporous walls and interconnected macropores was prepared by in situ self‐assembly of colloidal polymer and silica spheres with sucrose as the carbon source. The obtained porous carbon possesses a large specific surface area and pore volume with narrow mesopore size distribution, and acts as a host and conducting framework to contain highly dispersed elemental sulfur. Electrochemical tests reveal that the HOPC/S nanocomposite with well‐defined nanostructure delivers a high initial specific capacity up to 1193 mAh g^?1 and a stable capacity of 884 mAh g^?1 after 50 cycles at 0.1 C. In addition, the HOPC/S nanocomposite exhibits high reversible capacity at high rates. The excellent electrochemical performance is attributed exclusively to the beneficial integration of the mesopores for the electrochemical reaction and macropores for ion transport. The mesoporous walls of the HOPC act as solvent‐restricted reactors for the redox reaction of sulfur and aid in suppressing the diffusion of polysulfide species into the electrolyte. The “open” ordered interconnected macropores and windows facilitate transportation of electrolyte and solvated lithium ions during the charge/discharge process. These results show that nanostructured carbon with hierarchical pore distribution could be a promising scaffold for encapsulating sulfur to approach high specific capacity and energy density with long cycling performance.     

Electrochemical behavior of uranyl in ionic liquid 1-butyl-3-methylimidazolium chloride mixture with water

Electrochemical behaviors of U(VI) in 1-butyl-3-methylimidazolium chloride (C₄MimCl) with various water contents investigated by chronopotentiometry and cyclic voltammetry. The electrochemical reduction of U(VI) was identified to follow two processes: a lower valence intermediate U(V) was initially formed at the potential of ca. ?0.2 V(vs. Ag wire). Then, further deposition of UO₂ was followed at around ?0.8 V. Little amount of water (1–4 wt%) in C₄MimCl, however, has an effect on the U(VI) reduction by changing the current density of the redox reaction and the diffusion coefficient of U(VI) in C₄MimCl. The deposited product by potentiostatic electrolysis on the surface of stainless steel electrode was characterized by the scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and X-ray diffraction (XRD) methods. Although the electrodeposited black film was amorphous, the electrochemical reduced product of U(VI) can be still confirmed to be UO₂ by XRD after the crystallization of the amorphous deposits at 1,073 K in nitrogen atmosphere.